Praktica Digiscoping Bedienungsanleitung

Praktica Lensadapter Digiscoping

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Praktica Digiscoping (1 Seiten) in der Kategorie Lensadapter. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
Digiscoping DSLR Camera Adapter
Attach your SLR camera to your spotting scope in a matter of seconds and take photographs at long
range. All you need is an SLR camera, a spotting scope with an eyepiece diameter 28-42mm, the
PRAKTICA Digiscoping Camera Adapter and a T2 Mount.
Set up is easy, just follow these simple steps!
1. Screw the DSLR camera adapter onto the T2 Mount.
2. Place the camera adapter over the spotting scope eyepiece and screw into the thread.
3. Remove your DSLR lens from your camera body and then attach your camera to the T2 Mount.
1. 2. 3.
When using an adapter the range of exposure modes and metering is limited. On most cameras you can use manual or
aperture-priority modes, and centre-weighted metering.
It’s important to note that you cannot adjust the aperture when using a spotting scope. Use the automatic ISO setting on
your camera to adjust the exposure without relying simply on the shutter speed. Limit the ISO to 1600, and set the minimum
shutter speed to 1/500 sec to get sharp results.
You will have to use manual focus when digiscoping, and this can be difficult to judge due to the limited depth of field and
the small maximum apertures of most spotting scopes. Roughly focus the scope on your subject then fine tune your
focusing slowly until it is spot-on.
When finished press the camera lens release button on your DSLR to dismantle the T2 Mount.
DSLR Camera Settings
Digiscoping DSLR Camera Adapter
Use Manual or Aperture
Priority modes
Limit ISO to 1600
Set to centre
weighted metering Lens release button
dismantles the mount
Shutter speed at
minimum of 1/500 sec

Produktspezifikationen

Marke: Praktica
Kategorie: Lensadapter
Modell: Digiscoping

Brauchst du Hilfe?

Wenn Sie Hilfe mit Praktica Digiscoping benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten