POWERNAIL 445LS Bedienungsanleitung


Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r POWERNAIL 445LS (16 Seiten) in der Kategorie Kompressor. Dieser Bedienungsanleitung war fĆ¼r 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/16
Models 445 XLL, XLS, LL, LS
rev. 2019.04.09
Pneumatic PowernailerĀ®
OPERATION AND MAINTENANCE MANUAL
MANUAL DE OPERACION Y DE MANTENIMIENTO
MANUEL Dā€™INSTRUCTIONS ET Dā€™ENTRETIEN
Read this manual before you use this PowernailerĀ®. Follow all safety warnings and
instructions. If you are uncertain about the operation of the nailer, call us directly
at 1-800-323-1653 for assistance or contact the closest Powernail Dealer for help.
Please retain this information for future reference.
WARNING
The PowernailerĀ® Model 445 Mallet Actuated Pneumatic Nailer is designed to bring Powernail quality
to a pneumatic Nailer. For those looking for ease of use in a pneumatic tool, the Powernailer Model
445 provides several distinct advantages. The Model 445 can nail 3/4ā€ ļ¬‚ ooring down to 1/2ā€ tongue
and groove hardwood ļ¬‚ ooring through the use of easy-to-change, no-mar adapter plates. The Model
445 is designed for use with 1-1/2ā€, 1-3/4ā€ and 2ā€ Powercleats
Ā® nails.
INTRODUCTION
INDEX
LIMITED WARRANTY
POWERNAILĀ® Company, Inc. warrants to its customer, and to the ļ¬ rst end-use purchaser of
POWERNAIL ļ¬‚ ooring nailers purchased from an authorized POWERNAIL distributor, that
each serialized manufactured nailer by POWERNAILĀ®, for a period of 12 months from the
date of purchase, and with respect to the nailer body (speciļ¬ cally Models 200, 445, and 50P),
for a period of 10 years from date of purchase, (ā€œwarranty periodā€); shall be free of defects in
materials and workmanship and will meet POWERNAILā€™s speciļ¬ cations in eļ¬€ ect at the time of
Product shipment. POWERNAIL will repair or replace, at its option, any PowernailerĀ® that does
not conform to this warranty. Claims must be made no later than ļ¬ fteen (15) days after the end
of the warranty period. POWERNAIL will perform all repair or replacements itself or through
its authorized contractors. POWERNAIL is not responsible for shipping, labor or other direct or
indirect costs. Damage caused by abuse, misuse, unusual or excessive wear is excluded. Repair
or modiļ¬ cation of the Products by unauthorized parties will void this warranty. The customer
is responsible for returning Products to POWERNAIL for veriļ¬ cation of nonconformance.
Warranties for Products not manufactured by POWERNAIL are limited to warranties provided
to POWERNAIL by the manufacturer of such product that are assignable to customer.
THESE WARRANTIES AND REMEDIES ARE EXCLUSIVE OF ALL OTHERS, EXPRESS
OR IMPLIED. THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
PURPOSE ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL POWERNAILā€™S
LIABILITY FOR A WARRANTY CLAIM EXCEED THE PRICE PAID TO POWERNAIL
FOR THE NONCONFORMING PRODUCT, REGARDLESS OF THE FORM OR BASIS OF
THE CLAIM OR CAUSE OF ACTION.
Index..................................... 2
Warranty............................... 2
Safety Instructions................ 3
Powernail Company Info...... 3
Operating Instructions.......... 4-5
Parts & Service.................... 5-7
Drive Blade........................... 5
Seal Replacement................. 5-7
Parts List.............................. 8-9
Schematic (445 Nailers)........ 10
Seal Locations Diagram....... 11
Depth Chart.......................... 12
Troubleshooting Chart......... 13
Safety Labels........................ 14
Fasteners........................ 15
Accessory Products.............. 16
SAFETY INSTRUCTIONS
Always use approved and when operating this Nailer. The SAFETY GLASSES EAR PROTECTION
operator and others in the work area should always wear approved and eye protection FRONT SIDE
when operating this Nailer. Eye protection will help guard against ļ¬‚ ying nails and debris, which could
cause severe eye injury.
EYE AND EAR PROTECTION should be used to prevent hearing damage when there are high noise
levels in the work area.
ALWAYS use ear plugs with a noise reduction rated at 29 db or highter at a construction site.
Nailer noise ratings are at LPA-1sd=90.6,
LWA-1sd=99.3 and LPA-1s,1m=86.3.
Nailer vibration rating: m/s2=3.05.
Always DISCONNECT THE AIR SUPPLY before making any adjustments, repairing, clearing jams or when the
Nailer is not in use. Do not use on scaļ¬€ olding or ladders and disconnect nailer from air supply when transporting
between installation areas.
Never attach the female end of a quick disconnect to the Nailer. This will trap air inside the Nailer and permit it to
be discharged. Only the unrestricted male connection should be attached to the Nailer.
Nailer requires an air source that can continuously deliver 80 to 110 psi at 3-1/2 cubic feet of air per minute for
operation.
Normal air pressure should not exceed 120 psi or damage to the Nailer and seals may occur. Excess air pressure
can cause the Nailer to explode.
To prevent ļ¬ re or explosion, use only regulated compressed airā€”do not use bottled gases of any kind (no oxygen
or combustible gasses) to power this Nailer.
Nailer is intended for use installing wood ļ¬‚ ooring and is not to be used for purposes not speciļ¬ ed in the operations
manual.
Do not use any nails other than Powernail Powercleats Nails which are speciļ¬ cally designed for use in any
Powernailer. Powercleats Nails are available in various lengths. Contact your Powernail Dealer for Powercleats
Nails.
Use only Powernail replacement parts in the repair or maintenance of this nailer. Parts or repair services are
available from the manufacturer or from agents authorised by the manufacturer. Repairs should be carried out
only by trained service personel in the ļ¬ eld of fastener driving tools who will observe proper safety controls while
performing maintenace. Service personel should be qualiļ¬ ed to to asses the safe working condition of fastener
driving tools.
Never place any part of the body in the discharge path of the Nailer when air is connected to the Nailer. Always
make sure Nailer is empty of cleats before connecting air hose so as to prevent any accidental discharge from
occurring.
Never leave the Nailer unattended while it is connected to an air supply.
Whenever air is connected to the Nailer, keep body parts away from the nail discharge path. Disconnect
the air line before making adjustments or repairs on the Nailer. Only connect air to an unloaded Nailer
so as to prevent accidental discharge.
POWERNAIL COMPANY, INC.
1300 Rose Road, Lake Zurich, IL 60047 US
Phone: 1-800-323-1653 OR 847-847-3000
www.powernail.com


Produktspezifikationen

Marke: POWERNAIL
Kategorie: Kompressor
Modell: 445LS

Brauchst du Hilfe?

Wenn Sie Hilfe mit POWERNAIL 445LS benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Kompressor POWERNAIL

Bedienungsanleitung Kompressor

Neueste Bedienungsanleitung fĆ¼r -Kategorien-