Power Dynamics PDC-40 Bedienungsanleitung

Power Dynamics Radio PDC-40

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Power Dynamics PDC-40 (33 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war fĂŒr 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/33
PDC- DAB+ Tuner / USB / 40 BT
Ref. nr.: 172.707
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSƁUGI
V1.1
2
ENGLISH
Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in
order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched for the first time, on
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer.
- Do NOT connect the unit to a rheostat or dimmer.
- To avoid fire and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- Dur a thunderstorm or if the unit will not be used for a ing
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit ach room re
temperature before you switch it on.
- Never use the unit in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the fixture on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice om fr
a specialist.
- Do not force the controls.
- This unit is with speaker inside which can cause
magnetic field. Keep this unit at least 60cm away from
computer or TV.
- If this product have a built-in lead-acid rechargeable
battery. Please recharge the battery every 3 months if
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged please replace with same
specifications battery. And dispose the damaged battery
environment fr dly. ien
- If the unit has fallen, always have it checked by a
qualified technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment at may cause th
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving e unit. th
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
volt of the country is suitable for this unit. age
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certified CE. It is prohibited to make any changes the unit. They would invalidate the CE certificate and to
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into hous ld waste. Please bring them to a recycling centre. Ask your local authorities or your eho
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed withou rior notice.t p
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave e device switched off until it has reached room temperature. th
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
CONNECTING WITH BT-DEVICE
1. Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the
music. See the operating instructi for that device. ons
2. ton and activate BT-function. Press the “MODE” but
3. Select -device and make the BT-connection “PDC40” on your BT
If password is required, you can enter "0000".
Attention: The BT distance is approx. 10 meter without any barrier.
CONTROLS AND CONNECTIONS
Front View:
1. STAND- BUTTON BY
Use this switch to put the unit into or out of standby mode.
2. REMOTE SENSOR
This sensor receives the infrared information from the remote control. Don’t place any object or sticker in front of the sensor.
3. MODE BUTTON
Press to change modes between playing USB stick, auxiliary input, DAB+ and FM. BT,
4. MENU BUTTON
Press to enter FM / DAB+ menu mode. If the user does not select any item by pressing ENTER knob, it will return to FM /
DAB+ playing after several seconds.
FM menus consist of “Audio setting” and “System”.
“Audio setting”
a. Forced mono: As a stereo signal becomes weaker the audio signal will become poorer. It may be preferable to force the
radio to play the station in mono in order to reduce the level of audio noise.
b. Stereo allowed: “St” indicator on LCD display means that the current station is played as stereo.

Produktspezifikationen

Marke: Power Dynamics
Kategorie: Radio
Modell: PDC-40

Brauchst du Hilfe?

Wenn Sie Hilfe mit Power Dynamics PDC-40 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Radio Power Dynamics

Power Dynamics

Power Dynamics PDC-40 Bedienungsanleitung

3 November 2023

Bedienungsanleitung Radio

Neueste Bedienungsanleitung fĂŒr -Kategorien-

Ruarkaudio

Ruarkaudio Rseven Bedienungsanleitung

16 Oktober 2024
Ruarkaudio

Ruarkaudio MR1 Bedienungsanleitung

16 Oktober 2024
Denver

Denver TWE-55B Bedienungsanleitung

15 Oktober 2024
AudioSonic

AudioSonic CL-1486 Bedienungsanleitung

14 Oktober 2024
Sangean

Sangean DPR-39 Bedienungsanleitung

14 Oktober 2024
Sangean

Sangean RCR-9 Bedienungsanleitung

14 Oktober 2024
PerfectPro

PerfectPro Dabbox Bedienungsanleitung

13 Oktober 2024
Uniden

Uniden UH45CP Bedienungsanleitung

12 Oktober 2024
Sencor

Sencor SIR 5000WDB Bedienungsanleitung

11 Oktober 2024
AEG

AEG KRC 4350 BT Bedienungsanleitung

10 Oktober 2024