Porter-Cable PCXB310BS Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Porter-Cable PCXB310BS (28 Seiten) in der Kategorie Säge . Dieser Bedienungsanleitung war für 41 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/28
9 IN. (228 MM) BAND SAW
SCIE À RUBAN 228 MM (9 PO)
SIERRA DE CINTA PARA
BRANCO DE 228 MM (9 PULG.)
CATALOG NUMBER
PCXB310BS
Instruction Manual
Manuel d’instructions
Manual de instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIĂ“N,
CENTROS DE SERVICIO Y PĂ“LIZA
DE GARANTĂŤA.
LÉASE ESTE ADVERTENCIA:
INSTRUCTIVO ANTES DE USAR EL
PRODUCTO.
2
SECTION PAGE
PRODUCT SPECIFICATIONS ....................................................................................... 2
SAFETY GUIDELINES - DEFINITIONS ......................................................................... 3
POWER TOOL SAFETY ................................................................................................. 4
BAND SAW SAFETY ...................................................................................................... 5
ELECTRICAL REQUIREMENTS AND SAFETY ............................................................ 6
TOOLS NEEDED FOR ASSEMBLY ............................................................................... 9
CARTON CONTENTS .................................................................................................... 9
KNOW YOUR BAND SAW ............................................................................................. 11
GLOSSARY OF TERMS ................................................................................................. 12
ASSEMBLY AND ADJUSTMENTS ................................................................................. 13
OPERATION ................................................................................................................... 19
MAINTENANCE .............................................................................................................. 21
TROUBLESHOOTING GUIDE ....................................................................................... 22
ACCESSORIES AND ATTACHMENTS .......................................................................... 24
PARTS LIST .................................................................................................................... 25
WARRANTY ................................................................................................................... 28
MOTOR BLADE
Amps ............ Width ................. 1/8, 1/4, 3/8 in. 2.5 A
Voltage ......... 120 V (3.2, 6.4, 9.5 mm)
Hz ................. 60 Length ............... 59-1/2 in. (1511 mm)
Speed ........... 1720 RPM (No load) CUTTING CAPACITY
Type .............. Induction Throat ................ 9 in. (228 mm)
TABLE SIZE 12-5/16 x 11-7/8 in. Height ................ 3-11/32 in. (85 mm)
(313 x 302 mm) SAWDUST PORT 2-1/2 in. O.D. (63.5 mm)
To avoid electrical hazards, îšżre hazards or damage to the tool, use proper circuit protection.
Use a separate electrical circuit for your tools. This band saw is wired at the factory for 120 Volt
operation. It must be connected to a 120 Volt / 10 Ampere time delay fuse or circuit breaker. To
avoid shock or îšżre, replace power cord immediately if it is worn, cut or damaged in any way.
2016/10 Printed in China
WARNING
!
TABLE OF CONTENTS
PRODUCT SPECIFICATIONS
3
Some dust created by power sanding, sawing, grinding, drilling and other construction
activities contains chemicals known to the state of California to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
â—Ź Lead from lead-based paints,
â—Ź Crystalline silica from bricks and cement and other masonry products, and
â—Ź Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed
to îšżlter out microscopic particles. Avoid prolonged contact with dust from power
sanding, sawing, grinding, drilling, and other construction activities. Wear protective
clothing and wash exposed areas with soap and water. Allowing dust to get into your
mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.
Use of this tool can generate and/or disperse dust, which may cause serious and
permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory
protection appropriate for the dust exposure. Direct particles away from face and body.
SAVE THESE INSTRUCTIONS
WARNING ICONS
Your power tool and its Instruction Manual may contain “WARNING ICONS” (a picture
symbol intended to alert you to and/or instruct you how to avoid a potentially hazardous
condition). Understanding and heeding these symbols will help you operate your tool
better and safer. Shown below are some of the symbols you may see.
SAFETY ALERT: Precautions that involve your safety.
DANGER: Indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
NOTICE: Used without the safety alert symbol indicates potentially
hazardous situation which, if not avoided, may result in property damage.
WARNING
!
WARNING
!
DANGER
!
CAUTION
!
NOTICE
PROHIBITION
WEAR EYE PROTECTION: Always wear safety goggles or safety glasses with
side shields.
WEAR RESPIRATORY AND HEARING PROTECTION: Always wear respiratory and
hearing protection.
READ AND UNDERSTAND INSTRUCTION MANUAL: To reduce the risk of injury,
user and all bystanders must read and understand instruction manual before using
this product.
KEEP HANDS AWAY FROM THE MOVING PART AND CUTTING SURFACE: Failure
to keep your hands away from the moving part and cutting surface will result in serious
personal injury.
SUPPORT AND CLAMP WORK
WARNING
!
SAFETY GUIDELINES - DEFINITIONS


Produktspezifikationen

Marke: Porter-Cable
Kategorie: Säge
Modell: PCXB310BS

Brauchst du Hilfe?

Wenn Sie Hilfe mit Porter-Cable PCXB310BS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Säge Porter-Cable

Bedienungsanleitung Säge

Neueste Bedienungsanleitung fĂĽr -Kategorien-