Porter-Cable PCC740 Bedienungsanleitung
Porter-Cable
Drehmaschine
PCC740
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Porter-Cable PCC740 (36 Seiten) in der Kategorie Drehmaschine. Dieser Bedienungsanleitung war fĂźr 57 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/36
20V Max* 1/2 inch (12.7mm) Impact Wrench with hog ring anvil
ClĂŠ Ă Chocs avec enclume anneau porc de 12.7mm (1/2 po) et 20îV Max*
Llave de impacto de 20V Måx* con conector Tipo anillo de ½ pulg. (13mm)
CATALOG NUMBER
N° DE CATALOGUE
NÂş DE CATĂLOGO
PCC740
Instruction manual
Manuel dâ instructions
Manual de Instrucciones
www.portercable.com
INSTRUCTIVO DE OPERACIĂN, CENTROS DE SERVICIO Y PĂLIZA DE GARANTĂA.
ADVERTENCIA:
LĂASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Thank you for choosing PORTER-CABLE! To register your new product, go to:
www.portercable.com/ServiceAndSupport/ProductRegistration.aspx
Merci dâavoir choisi PORTER-CABLE! Consulter le site Web www.portercable.com/
ServiceAndSupport/ProductRegistration.aspx pour enregistrer votre nouveau produit.
Gracias por elegir PORTER-CABLE ! Para registrar su producto, visite : www.portercable.
com/ServiceAndSupport/ProductRegistration.aspx
*Maximum initial battery pack voltage (measured without a workload) is 20 volts.
Measured under a workload, nominal voltage is 18.
*La tension initiale maximale du bloc-piles (mesurĂŠe sans charge de travail) est de 20
volts. La tension nominale est de 18.
*El mĂĄximo voltaje inicial del paquete de baterĂas (medido sin una carga de trabajo)
es 20 voltios. la tensiĂłn nominal es de 18.
2
General Power Tool Safety Warnings
WARNING: Read all safety
Warnings and all instructions. Failure to
follow the warnings and instructions may
result in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
The term âpower toolâ in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Power tools create sparks
which may ignite the dust or fumes.
c)
Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c) Do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a
ground fault circuit interrupter (GFCI)
protected supply. Use of a GFCI
reduces the risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are
doing and use common sense
when operating a power tool. Do
not use a power tool while you
are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while
operating power tools may result in
serious personal injury.
b) Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust
mask, nonskid safety shoes, hard
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
c) Prevent unintentional starting.
Ensure the switch is in the off
position before connecting to
power source and/ or battery
pack, picking up or carrying the
tool. Carrying power tools with your
finger on the switch or energizing
power tools that have the switch on
invites accidents.
d)
Remove any adjusting key or wrench
before turning the power tool on.
A wrench or a key left attached to a
rotating part of the power tool may
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you
to hazardous situations and your risks of personal injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not avoided, may
result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates potentially hazardous
situation which, if not avoided, may result in property damage.
3
result in personal injury.
e) Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewelry. Keep your
hair, clothing and gloves away
from moving parts. Loose clothes,
jewelry or long hair can be caught in
moving parts.
g) If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of dust collection can reduce
dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the
switch does not turn it on and
off. Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the
power source and/or the battery
pack from the power tool before
making any adjustments,
changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of
the reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool. Power
tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check
for misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power toolâs operation.
If damaged, have the power
tool repaired before use. Many
accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g) Use the power tool, accessories
and tool bits, etc. in accordance
with these instructions, taking into
account the working conditions
and the work to be performed.
Use of the power tool for operations
different from those intended could
result in a hazardous situation.
5) BATTERY TOOL USE AND CARE
a)
Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
b) Use power tools only with
specifically designated battery
packs. Use of any other battery packs
may create a risk of injury and fire.
c) When battery pack is not in use,
keep it away from other metal
objects like paper clips, coins, keys,
nails, screws, or other small metal
objects that can make a connection
from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
d) Under abusive conditions,
liquid may be ejected from the
battery, avoid contact. If contact
accidentally occurs, flush with
water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
6) SERVICE
a) Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
SPECIFIC SAFETY RULES
⢠Hold power tool by insulated gripping
surfaces, when performing an
operation where the fastner may
contact hidden wiring. Fastener
contacting a âliveâ wire may make
exposed metal parts of the power tool
âliveâ and could give the operator an
electric shock.
⢠Wear ear protectors with impact
drivers. Exposure to noise can cause
hearing loss.
⢠Use clamps or another practical way
to secure and support the work piece
to a stable platform. Holding the work
by hand or against your body leaves it
unstable and may lead to loss of control.
⢠When not in use, place tool on its side
on a stable surface where it will not
cause a tripping or falling hazard. Some
tools with large battery packs will stand
upright but may be easily knocked over.
⢠Keep your hair, clothing, and gloves
away from air vents. Air vents often
cover moving parts in which these items
can be caught.
Produktspezifikationen
| Marke: | Porter-Cable |
| Kategorie: | Drehmaschine |
| Modell: | PCC740 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Porter-Cable PCC740 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Drehmaschine Porter-Cable
28 November 2023
8 Mai 2023
27 Oktober 2022
Bedienungsanleitung Drehmaschine
- Drehmaschine Basetech
- Drehmaschine Panasonic
- Drehmaschine Makita
- Drehmaschine Bosch
- Drehmaschine Parkside
- Drehmaschine Vonroc
- Drehmaschine AEG
- Drehmaschine Powerfix
- Drehmaschine EMOS
- Drehmaschine Black And Decker
- Drehmaschine Cocraft
- Drehmaschine FERM
- Drehmaschine Ryobi
- Drehmaschine Skil
- Drehmaschine Trotec
- Drehmaschine Carrera
- Drehmaschine Hilti
- Drehmaschine DeWalt
- Drehmaschine Einhell
- Drehmaschine Elu
- Drehmaschine Festool
- Drehmaschine Worx
- Drehmaschine Kraftwerk
- Drehmaschine Hikoki
- Drehmaschine Hitachi
- Drehmaschine Hazet
- Drehmaschine Kress
- Drehmaschine Metabo
- Drehmaschine Stanley
- Drehmaschine GĂźde
- Drehmaschine Biltema
- Drehmaschine Meec Tools
- Drehmaschine Dremel
- Drehmaschine Fieldmann
- Drehmaschine Beta
- Drehmaschine Westfalia
- Drehmaschine Chicago Pneumatic
- Drehmaschine Dedra
- Drehmaschine Silverline
- Drehmaschine Sthor
- Drehmaschine Yato
- Drehmaschine Pansam
- Drehmaschine Bavaria
- Drehmaschine BrĂźder Mannesmann
- Drehmaschine Milwaukee
- Drehmaschine Toolcraft
- Drehmaschine Chamberlain
- Drehmaschine Fein
- Drehmaschine Bonus
- Drehmaschine Craftsman
- Drehmaschine Powerplus
- Drehmaschine Ozito
- Drehmaschine Steren
- Drehmaschine Wiha
- Drehmaschine StarTech.com
- Drehmaschine Meister Craft
- Drehmaschine Truper
- Drehmaschine Park Tool
- Drehmaschine XU1
- Drehmaschine Urrea
- Drehmaschine Wera
- Drehmaschine VOREL
- Drehmaschine Netter Vibration
- Drehmaschine Rodcraft
- Drehmaschine Bavaria By Einhell
- Drehmaschine SW-Stahl
Neueste Bedienungsanleitung fĂźr -Kategorien-
26 Juni 2024
26 Juni 2024
21 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024
18 Juni 2024