Planet POE-175-95 Bedienungsanleitung

Planet Nicht kategorisiert POE-175-95

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Planet POE-175-95 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET POE-175-95 Single-port

10/100/1000Mbps 802.3bt PoE++ Injector.

Please unpack the box of the device carefully, and the box should

contain the following items:

802.3bt PoE injector x 1 User’s manual x 1

AC power cord x 1 Ground cable x 1

If any item is found missing or damaged, please contact your local

reseller for replacement.

3.ProductSpecications

Product POE-175-95

Hardware Specications

Interface

Input Port 1 x RJ45 STP Data In

Output Port 1 x RJ45 STP PoE (Data + Power) Out

AC Socket 1 x AC input socket

DIP Switch BT, UPoE or Legacy BT Mode

Network Cable

Twisted-pair cable up to 100 meters

(328ft)

10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6

100BASE-TX: 4-pair UTP Cat. 5, 5e, 6

1000BASE-T: 4-pair UTP Cat. 5e, 6

LED Indicators

PWR x 1 (Green)

PoE-in-Use x 1 (Green)

PoE Max x 1 (Green)

Data Rate 10/100/1000Mbps

Dimensions (W

H) 170 x 100 x 40 mm

Weight 443g

Unit Output Voltage DC 54V

Power Requirements AC 100-240V, 1.8A max.

Power Consumption Max. 1 watts/3.41 BTU (No Loading)

Max.111 watts/378.5 BTU (Full loading)

No. of Devices that

Can be Powered 1

LED Indicators:

10/100/1000T

EthernetEthernet+DC

PWR

PoE-in-Use

PoE Max.

BTLegacy BT UPoE

LED Color Function

PWR Green Lights to indicate the device has power.

PoE-in-Use Green

Lights There is a PoE PD connected to the

port, which supplies power.

Blinks Indicates the port’s power supply is

abnormal.

O No PoE powered device (PD) connected.

Max. PoE

Usage Green Lights Indicating the output power reaches

80%

Operating Humidity 5 ~ 90%, relative humidity,

non-condensing

Storage Humidity 5 ~ 90%, relative humidity,

non-condensing

Caution

1. As IEEE 802.3bt device provides high power, please

use high-quality network cable and RJ45 connector.

2. The maximum PoE output power depends on the

cable length and the quality of cable.

2. Product Features

 Interface

 2 RJ45 interfaces

 1-port Data input

 1-port Data + Power output

 1 AC 100-240V input power socket

 1 DIP switch for selecting BT, UPoE or Legacy mode

 Power over Ethernet

 Complies with IEEE 802.3af/at/bt PoE end-span/mid-span PSE

 Supports PoE power up to 95 watts for PoE port

 Auto-detection of PoE IEEE 802.3af/at/bt devices that may be

damaged by incorrect installation

 Monitor the status of the total PoE usage in real time

 Remote power feeding up to 100m

 Hardware

 All-in-one compact size design

 Internal power supply

 LED indicators for power, PoE-in-Use and maximum PoE usage

Power over Ethernet

PoE DIP Switch

IEEE 802.3af/at/bt PSE

UPoE

Legacy BT

PoE Power Output

Budget DC 54V / 95-watt PoE via 4-pair

PoE Power Output Max. 95W@1 m cable

Max. 73W@100 m cable

PoE Power Supply Type End-span + Mid-span

Power Pin Assignment Pair 1 End-span: 1/2 (-), 3/6 (+)

Pair 2 Mid-span: 4/5 (+), 7/8 (-)

Standards Conformance

Standards Compliance

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast Ethernet

IEEE 802.3ab 1000BASE-T Gigabit

Ethernet

IEEE 802.3bt 4-pair Power over Ethernet

Type 4

IEEE 802.3at Power over Ethernet Plus

IEEE 802.3af Power over Ethernet

Regulatory Compliance FCC Part 15 Class A, CE

Surge Protection Dierence Mode: ±2KV,

Common mode: ±4KV

Electrostatic standard Contact 6KV, air 8KV

Environment

Operating Temperature 0 ~ 50 degrees C

Storage Temperature -40 ~ 70 degrees C

4. Product Outlook

100-240V AC, 50/60Hz

10/100/1000T

EthernetEthernet+DC

PWR

PoE-in-Use

PoE Max.

BTLegacy BT U PoE

Figure 1: Dimensions

5. Hardware Installation

The following section describes the hardware features of the

POE-175-95. Before connecting any network device to it, please

read this chapter carefully.

5.1 PoE Injector Grounding

A good grounding system is the groundwork for the smooth and

safe operation of the POE-175-95, and an excellent way to prevent

lightning strikes and resistance to interference. Please follow the

POE-175-95’s grounding specication instructions to ensure a good

grounding system.

 Proper Grounding

When using an AC power source, the device must be grounded

with the green and yellow ground cables; otherwise, shock hazards

may occur when insulation resistance between the internal power

supply and the PoE Injector degrades.

 Lightning and Grounding Protection

The lightning protection system is an independent system

consisting of a lightning rod, conductor and connection joint with

the grounding system. The grounding system usually is shared

with the ground reference, and green and yellow ground cables.

Lightning and grounding protection is a building requirement, not a

specic requirement of the PoE Injector.

The POE-175-95 provides chassis grounding post on its rear side.

Chassis grounding protection should be properly connected to the

grounding connector.

- 9 -

- 10 -

- 11 -

- 12 - - 13 -

The ground cabling procedure is as follows:

Step 1： Remove the nuts from the rear PoE Injector where the

grounding posts are.

Step 2： Wrap one end of the green and yellow grounding cables

to the grounding posts.

Step 3： Tighten the grounding post nut well.

Step 4： Attach the other end of the grounding cable to the

grounding connector.

Note

The grounding cable should be made of a good

conductor, and the diameter should be determined by

the possible maximum current that may pass through.

Bare conductor cabling is forbidden.

Ground resistance value: The combined grounding

resistance should be less than 1 ohm.

5.2 Before Installation

Before your installation, it is recommended to check your network

environment. If there is any IEEE 802.3bt device that needs to be

powered on and works normally, the POE-175-95 provides you with

a way out to supply power to this Ethernet device conveniently and

easily.

5.4 POE-175-95 Installation

1. Connect the AC power cord to the of the POE-175-95; “AC slot”

the “PWR” LED will be steadily on.

2. Connect a standard Ethernet cable from an Ethernet switch or

PC workstation to the port of the POE-175-95.“Ethernet”

3. Connect the long cable to the port.“Ethernet+DC”

4. Due to the capability of IEEE 802.3af/at/bt Power over Ethernet,

the POE-175-95 can directly connect with any IEEE 802.3af/at/

bt-compliant end nodes, such as PTZ (pan, tilt, zoom) network

cameras, color touch screen Voice over IP (VoIP) telephones and

multi-channel wireless LAN access points.

Figure 2: Architecture of connected IEEE 802.3af/at/bt devicea

Once the POE-175-95 detects the existence of an IEEE 802.3af/at/

bt device, the LED indicator will be steadily on to show PoE-in-Use

it is providing power.

Note

1. According to IEEE 802.3af/at/bt Power over

Ethernet, the POE-175-95 will not inject power to

the cable if not connected to IEEE 802.3af/at/bt-

compliant device.

2. Depending on the length of cable, the PoE power

received by a PD is different.

It is equipped with an AC power cord with 100-240V AC input and

injects DC 54V power into the pin of the twisted-pair cable (pair

1/2 [-], 3/6 [+] and pair 4/5 [+], 7/8 [-]).

5.3 Selectable Standard IEEE 802.3bt, UPoE or

Legacy mode

The POE-175-95 provides power to those powered devices which

do not fully follow the IEEE 802.3af/at/bt standard. The UPoE and

Legacy bt modes provide the PD with 60 to 95 watts of power

output voltage.

Modes Descriptions

BT mode Powered devices that fully support IEEE 802.3bt

standards with output budget of 90W.

UPoE mode Powered devices that support Cisco UPoE with

output budget of 95W.

Legacy BT Powered devices that support capacitive or

resistance electronic tag with output budget of 90W.

10/100/1000T

EthernetEthernet+DC

PWR

PoE-in-Use

PoE Max.

BTLegacy BT UPoE

5.5 POE-175-95 and POE-173S Installation

1. Connect DC plug from of the POE-173S to a remote "DC Out"

device.

2. Connect the AC power cord to the of the POE-175-95; “AC slot”

the “PWR” LED will be steadily on.

3. Connect a standard Ethernet cable from an Ethernet switch or

PC workstation to the port of the POE-175-95.“Ethernet”

4. Connect a standard Ethernet cable from port “Ethernet+DC”

of the POE-175-95 to the port of the POE-173S. The “PoE In”

“30W” “60W” “90W+”, or LED of the POE-173S and the

“PoE-in-Use” LED of the POE-175-95 will light up continuously.

5. Connect a standard Ethernet cable from the port of “Ethernet”

the POE-173S to the remote Ethernet device.

6. The remote device will be turned on and connected.

Figure 3: Architecture of connected POE-175-95 and POE-173S

Note

Please ensure the POE-173S output voltage is correct

before applying power to the remote device.

PLANET TECHNOLOGY CORPORATION

e-mail: sales@planet.com.tw http://www.planet.com.tw

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan Tel:886-2-2219-9518 Fax:886-2-2219-9528

EC Declaration of Conformity

For the following equipment:

*Type of Product Single-Port 10/100/1000Mbps 802.3bt PoE Injector :

*Model Number : -175-95 POE

* Produced by:

Manufacturer‘s Name : Planet Technology Corp.

Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan

is herewith confirmed to comply with the requirements set out in the Council Directive on the

Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive on

2014/30/EU and Low Voltage Directive 2014/35/EU.

For the evaluation regarding the EMC, the following standards were applied:

EN 55032 2015+AC:2016, CLASS A

EN 61000-3-2 2014

EN 61000-3-3 2013

EN 55024 2010+A1:2015

EN 62368-1 2014

R esponsible for marking this declaration if the:

 Manufacturer Authorized representative established within the EU 

Authorized representative established within the EU (if applicable):

Company Name: Planet Technology Corp.

Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan

Person re sponsible for making this declaration

Name, Surname Jonas Yang

Position / Title : Director

Taiwan

Jan., 2019

Place

Date

Legal Signature

Customer Support

Thank you for purchasing PLANET products. You can browse

our online FAQ resource at the PLANET Web site rst to check if

it could solve your issue. If you need more support information,

please contact PLANET support team.

PLANET online FAQs:

http://www.planet.com.tw/en/support/faq?method=category&c1=2

Support team mail address:

support@planet.com.tw

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.

All other trademarks belong to their respective owners.

Produktspezifikationen

Marke:	Planet
Kategorie:	Nicht kategorisiert
Modell:	POE-175-95
Breite:	170 mm
Tiefe:	100 mm
Gewicht:	480 g
Produktfarbe:	Schwarz
Höhe:	40 mm
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 90 %
Netzstandard:	IEEE 802.3bt
Power over Ethernet (PoE):	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-10 - 70 °C
Luftfeuchtigkeit bei Lagerung:	5 - 90 %
Ausgangsspannung:	DC 54 V
Ausgangsleistung:	95 W
Eingangsspannung:	100 - 240 V
Verkabelungstechnologie:	10/100/1000Base-T(X)
Kabelstandard:	Cat6
Power-LED:	Ja
RJ-45-Eingangsanschlüsse:	1
RJ-45-Ausgangsanschlüsse:	1