Planet POE-172 Bedienungsanleitung

Planet Netzwerkkarte / Adapter POE-172

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Planet POE-172 (4 Seiten) in der Kategorie Netzwerkkarte / Adapter. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET Single-Port

10/100/1000Mbps Ultra PoE Injectors, POE-172 and

POE-173.

Model LAN Port Speed PoE Standard PoE

Budget

POE-172 10/100/1000Mbps

Ultra PoE, backward

compatible with IEEE

802.3at/af standard

watts

POE-173 10/100/1000Mbps Ultra PoE 60

watts

The term in the following section “Ultra PoE Injector”

of this User’s Manual means the POE-172 and POE-173.

The box of the Single-Port 10/100/1000Mbps Ultra PoE

Injector should contain the following items:

The Single-Port 10/100/1000Mbps Ultra PoE Injector

x 1

User’s Manual x 1

 AC Power Cord x 1

If any of these are missing or damaged, please contact

your dealer immediately; if possible, retain the carton

including the original packing material, and use them

again to repack the product in case there is a need to

return it to us for repair.

2. Product Features

Interface

2 x RJ45 interface

1-port Data + Power output

 1-port Data input

 1 x AC 100-240V input power socket

Power over Ethernet

 Ultra Power over Ethernet PSE

 Up to 60 watts of power on 4-pair UTP cable

 Backward compatible with IEEE 802.3at/af PD

device (POE-172)

Auto-detection of PoE IEEE 802.3at/af equipment

and devices to check whether there’s any damage

done via incorrect installation (POE-172)

 Remote power feeding up to 100m

Hardware

 All-in-one compact size design

 Internal power supply

 LED indicators for Power LED and Active LED (PoE

ready/in-use)

Note

PSE (Power Sourcing Equipment) is a

device (switch, or hub for instance) that

will provide power in a PoE setup. The

maximum allowed continuous output power

per such device in IEEE 802.3af is 15.4

watts, in IEEE 802.3at is 30 watts and ultra

PoE is 60 watts

Note

PD (Powered Device) such as an IP

phone, network camera or wireless access

point is a PoE-enabled terminal by PSE and

thus it consumes energy.

3. Product Specications

Product POE-172 POE-173

Hardware Specications

Interface

LAN 1 x RJ45 STP, Input Port“Data”

PoE 1 x RJ45 STP, “Data + Power”

Output Port

AC Connector 1 x AC input power socket,

IEC-320 C6

Network

Cable

Ultra PoE

(60W)

4-pair UTP Cat. 5, 5e, 6 up to

100m (328ft)

802.3af/

at PoE

(15W/30W)

2-pair UTP Cat. 3, 4, 5, up to

100m (328ft)

LED Indicator

System: Power x 1 (Green)

PoE Port: Active, PoE ready/

in Use x 1 (Green)

Data Rate 10/100/1000Mbps

Dimensions (W x D x H) 115 x 62.5 x 31 mm

Weight 235g 177g

Unit Output Voltage DC 56V, 1.08A DC 50V, 1.2A

Power Requirements 100-240V AC @50/60Hz,

1.5A max.

Power Consumption 60 watts max.

Operating Temperature 0 ~ 50 degrees C

Storage Temperature -10 ~ 70 degrees C

Operating Humidity 5 ~ 95%, relative humidity, non-

condensing

Storage Humidity 5 ~ 95%, relative humidity, non-

condensing

Power over Ethernet

PoE Standard

Ultra PoE over

4-pair UTP cable,

IEEE 802.3at

Power over

Ethernet Plus End-

span/Mid-span PSE

Ultra PoE

over 4-pair

UTP cable

PoE Power Supply Type End-span + Mid-span

Power Pin Assignment Pair 1 End-Span: 1/2 (+), 3/6 (-)

Pair 2 Mid-Span: 4/5 (+), 7/8 (-)

PoE Power Output

DC 56V/60-watt

PoE via 4-pair

DC 56V/30-watt

PoE via 2-pair

DC 50V/60-

watt PoE via

4-pair

DC 50V/30-

watt PoE via

2-pair

Standards Conformance

Standards Compliance

IEEE 802.3 10BASE-T Ethernet

IEEE 802.3u 100BASE-TX Fast

Ethernet

IEEE 802.3ab 1000BASE-T Gigabit

Ethernet

IEEE 802.3at Power over Ethernet

Plus

IEEE 802.3af Power over Ethernet

Regulatory Compliance FCC Part 15 Class B, CE

4. Product Outlook

Figure 1: An overview of Ultra PoE Injector.

Rear Panel

Front Panel

Top Panel

Bottom

Figure 1: POE-172 & POE-173 Outlook

LED Indicators

LED Color Function

POWER Green It indicates that the Ultra PoE Injector has

power.

ACTIVE Green It indicates the port is providing 56V (POE-

172) or 50V (POE-173) DC in-line power.

5. Hardware Installation

The following section describes the hardware features of

Ultra PoE Injector. Before connecting any network device

to the Ultra PoE Injector, read this chapter carefully.

5-1 Before Installation

The POE-172 is backward compatible with IEEE 802.3af

PoE and IEEE 802.3at PoE Plus standard. It is equipped

with an AC power cord with 100-240V AC input and

injects DC 56V power into the pin of the twisted pair

cable (pair 1/2 [+], 3/6 [-] and pair 4/5 [+], 7/8 [-])

for 60-watt ultra PoE injection.

Before connecting the POE-172 to your powered device

(PD), please check to ensure that your powered device

(PD) can accept 60-watt PoE power through pin 1/2 (+)

& 3/6 (-) and pin 4/5 (+) & 7/8 (-). Otherwise, it will

damage your powered device (PD).

Note

DO NOT connect POE-173 POE port to

your non-POE network equipment Ethernet

interface. Otherwise, it will damage your

network equipment.

If there is difculty in nding a power socket for AC-DC

adapter of your non-PoE network device, the Ultra PoE

Injector and POE-171S (Ultra PoE Splitter) can provide

you with DC power for this Ethernet device conveniently

and easily.

Note

The Ultra PoE Injector and POE-171S can

be installed in pair. However, the use of the

third-party device is allowed if the device

complies with IEEE 802.3at Power over

Ethernet Plus and a maximum of 30 watts

of output capability.

Note

Since the Ultra PoE injector’s PoE port

supports 56V DC (POE-172) or 50V DC

(POE-173) PoE power output, please check

and assure the Powered Device’s (PD)

acceptable DC power range is 56V DC

or 50V DC; otherwise, it will damage the

Powered Device (PD).

5-2 Ultra PoE Injector Installation

Due to the backward capability of IEEE 802.3at/af PoE

standard, the Ultra PoE Injector can directly connect

with any IEEE 802.3at/af end-nodes such as PTZ (Pan,

Tilt & Zoom) speed dome network cameras, color touch-

screen voice over IP (VoIP) telephones, and multi-

channel wireless LAN access points. The screen in Figure

2 is shown below.

- 9 -

- 10 -

- 11 -

- 12 - - 13 -

Switch

100 meters

PoE

PoE PTZ

IP Camera

Ultra PoE Injector

1000BASE-T UTP

PoE

1000BASE-T UTP with PoE

Power Line (AC)

Figure 2: Connection to IEEE 802.3at/802.3af Powered

Devices

1. Connect the AC power cord to of Ultra PoE “AC slot”

Injector; the LED will be on steadily.“POWER”

2. Connect a standard network cable from switch/work-

station to port of Ultra PoE Injector.“LAN”

3. Connect the long cable to the port (PoE) of the

remote PoE PD device.

4. Connect with IEEE 802.3at/af devices.

Once Ultra PoE Injector detects the existence of an IEEE

802.3at/802.3af device, the ACTIVE LED indicator will

be on steadily to show it is providing power.

Note

If the connected device is not fully

complying with IEEE 802.3at/802.3af Power

over Ethernet or in-line power device, the

LED indicator of Ultra PoE Injector will not

be on steadily.

5-3 The Ultra PoE Injector and Splitter

Installation

Below are the steps showing how to install PLANET

Ultra PoE Injector (POE-172 & POE-173) and Ultra PoE

Splitter (POE-171S) in pair.

Switch

Power 12V/19V/24V

POE-171S

100 meters

PoE

AC DC

Laptop

1000BASE-T UTP

PoE

1000BASE-T UTP with PoE

Power Line (AC)

DC Power Line (DC)

Ultra PoE Injector Ultra PoE

Splitter

Figure 3: Topology of the Connection of Ultra PoE Injector and

POE-171S

1. Connect the AC power cord to of Ultra PoE “AC slot”

Injector; the LED will be on steadily.“POWER”

2. Connect a standard network cable from port “POE”

of Ultra PoE Injector to port of POE-171S. “PoE In”

The “ACTIVE” LED of Ultra PoE Injector and POE-in-

use LED of POE-171S will light up continuously.

3. Connect a standard network cable from switch/work-

station to port of Ultra PoE Injector.“LAN”

4. Connect the UTP cable in the package from

“Ethernet” port of POE-171S to the RJ45 port of

remote device.

5. Adjust proper DC power output and connect DC plug

from “DC OUT” of POE-171S to remote device.

6. Power on the remote device and its power LED indi-

cator will remain on.

Note

Please make sure the POE-171S output

voltage is correct before applying power

to remote device. The POE-171S provides

DC12V/19V/24V power output.

5-4 The Ultra PoE Injector and PoE

Extender Installation

Below are the steps showing how to install the PLANET

Ultra PoE Injector (POE-172 & POE-173) and 802.3at

PoE Plus Extender (POE-E201) to extend the distance of

networking.

802.3at

PoE Extender

PoE PoE

100 meters100 meters

200 meters

Power Line (AC)

1000BASE-T UTP

PoE

1000BASE-T UTP with PoE

PoE IP Camera

Ultra PoE Injector

Figure 4: Topology of the Connection of Ultra PoE Injector and

POE-E201

1. Connect the AC power cord to of Ultra PoE “AC slot”

Injector; the LED will be on steadily.“POWER”

2. Connect a standard network cable from port “POE”

of Ultra PoE Injector to the port of POE-E201.“IN”

3. The Ultra PoE Injector delivers both Ethernet Data

and PoE power over UTP cable to the POE-E201 and

the “ACTIVE” LED of Ultra PoE Injector and “PoE

IN” LED of POE-E201 will light up continuously.

4. Connect the additional standard network cable to the

remote Powered Device (PD) via the port “OUT”

of POE-E201.

5. The “OUT” port is also the power injector which

transmits DC voltage to the standard network cable

and transfer data and power simultaneously between

the Ultra PoE Injector and PD.

6. Once POE-E201 detects the existence of an IEEE

802.3at/802.3af device, the LED indi“PoE OUT” -

cator will be on steadily to show it is providing power.

Note

1. If the connected device is not fully

complying with IEEE 802.3at/802.3af

standard or in-line power device, the

PoE OUT LED indicator of POE-E201 will

not be on steadily.

2. According to IEEE 802.3at/802.3af

standard, the POE-E201 will not inject

power to the cable if not connected to a

standard IEEE 802.3at/802.3af device.

Customer Support

Thank you for purchasing PLANET products. You can

browse our online FAQ resource at the PLANET Web site

rst to check if it could solve your issue. If you need

more support information, please contact PLANET switch

support team.

PLANET online FAQ :

http://www.planet.com.tw/en/support/faq.php?type=2

Switch support team mail address :

support_switch@planet.com.tw

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All

other trademarks belong to their respective owners.

EC Declaration of Conformity

For the following equipment:

*Type of Product : Single-Port 10/100/1000Mbps Ultra PoE Injector

*Model Number : POE-173, POE-172

* Produced by:

Manufacturer‘s Name : Planet Technology Corp.

Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist.,

New Taipei City 231, Taiwan (R.O.C.).

is herewith confirmed to comply with the requirements set out in the Council Directive on the

Approximation of the Laws of the Member States relating to Electromagnetic Compatibility

Directive on 2004/108/EC and 2014/30/EU.

For the evaluation regarding the EMC, the following standards were applied:

EN55022 (2010+AC:2011)

EN 61000-3-2 (2014)

EN 61000-3-3 (2013)

EN55024 (2010)

IEC 61000-4-2 (2008)

IEC 61000-4-3 (2006+A1:2007+A2:2010)

IEC 61000-4-4 (2012)

IEC 61000-4-5 (2006)

IEC 61000-4-6 (2013)

IEC 61000-4-8 (2009)

IEC 61000-4-11 (2004)

Responsible for marking this declaration if the:

Manufacturer  Authorized representative established within the EU

Authorized representative established within the EU (if applicable):

Company Name: Planet Technology Corp.

Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)

Person responsible for making this declaration

Name, Surname Kent Kang

Position / Title : Director

Taiwan 27th May, 2016

Place Date Legal Signature

PLANET TECHNOLOGY CORPORATION

e-mail: sales@planet.com.tw http://www.planet.com.tw

10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528

Produktspezifikationen

Marke:	Planet
Kategorie:	Netzwerkkarte / Adapter
Modell:	POE-172
Breite:	115 mm
Tiefe:	62.5 mm
Gewicht:	235 g
Produktfarbe:	Schwarz
Höhe:	31 mm
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Netzstandard:	IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u
Zertifizierung:	FCC Part 15 Class B, CE
Power over Ethernet (PoE):	Ja
Netzteil Eingansgsspannung:	100 - 240 V
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Warentarifnummer (HS):	85176990
Stromverbrauch (max.):	60 W
Plug & Play:	Ja
Ethernet LAN Datentransferraten:	10,100,1000 Mbit/s
LED-Anzeigen:	PoE,Power
Temperaturbereich bei Lagerung:	5 - 95 °C
Luftfeuchtigkeit bei Lagerung:	5 - 95 %
Anzahl der basisschaltenden RJ-45 Ethernet Ports:	2
Basic Switching RJ-45 Ethernet Ports-Typ:	Gigabit Ethernet (10/100/1000)
10G-Unterstützung:	Nein
MAC-Adressentabelle:	- Eintragungen
Routing-/Switching-Kapazität:	- Gbit/s
Rack-Einbau:	Nein
Netzteilfrequenz:	50/60 Hz
Abmessungen (BxTxH):	115 x 62.5 x 31 mm
Ethernet Schnittstellen Typ:	Gigabit Ethernet
Netzteil enthalten:	Ja
Maximaler Arbeitsabstand:	100 m
Temperatur Betriebsumgebung:	-10 - 70 °F
Power over Ethernet (PoE) Spannung:	56 V