Planet POE-161 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Planet POE-161 (4 Seiten) in der Kategorie Netzwerkkarte / Adapter. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
IEEE 802.3at Gigabit
High Power over Ethernet Injector
POE-161
Users Manual
Version 1.1
2. Product Features
POE-161:
Interface
2-Port RJ-45 interfaces
1-Port Data + Power output
1-Port Data input
1 DC 56V input power socket
PoE
Gigabit High Power over Ethernet Mid-Span PSE
IEEE 802.3at POE compliant
IEEE 802.3af splitter devices compatible
Support PoE Power up to 30 Watts for PoE port
Up to 1 IEEE 802.3at devices powered
Provides DC 56V power over RJ-45 Ethernet cable to
device with Ethernet port
Auto-detect of POE IEEE 802.3at equipment and
devices from being damaged by incorrect installation
Remote power feeding up to 100m
Hardware
Plastic case
LED indicators for Power LED and PoE In-use
4. Product Outlook
Figure 1: shows a front panel of 802.3at PoE Injector.
Figure1: POE-161 Outlook
LED Indicators
LED Color Function
PWR Green Lights to indicate that the POE-161
has power.
PoE In-use Green Lights to indicate the port is
providing 56V DC in-line power.
3. Product Specication
Product POE-161
Hardware Specication
Interface
“Data” Input Port 1 x RJ-45 STP
“PoE
(Data+Power)”
Output Port
1 x RJ-45 STP
DC 56V Input
power socket 1
LED Indicator System: Power x 1 (Green)
PoE Port: PoE in Use x 1 (Green)
Network Cable
10Base-T: 2-Pair UTP Cat. 3, 4, 5, up to
100m (328ft)
100Base-TX: 2-Pair UTP Cat. 3, 4, 5, up
to 100m (328ft)
1000Base-T: 2-Pair UTP Cat. 5, 5e, 6 up
to 100m (328ft)
EIA/TIA- 568 100-ohm STP (100m)
Data Rate 10/100/1000Mbps
Dimension (W x D x H) 95 x 70 x 25 mm
Weight 83g
Unit Input Voltage DC 56V, 0.53A
Power Requirement 100-240V AC, 50/60Hz
Power Consumption 30 Watts max.
1. Package Content
Thank you for purchasing PLANET IEEE 802.3at High Power
over Ethernet Injector, POE-161. Terms of “802.3at PoE
Injector” in following section of this User’s Manual means
the POE-161.
Upon open the box of the IEEE 802.3at High Power over
Ethernet Injector and carefully unpack it. The box should
contain the following items:
POE-161:
The IEEE 802.3at Gigabit High Power over Ethernet
Injector x 1
User’s Manual x 1
DC 56V Power Adapter x 1
Power Cord x 1
If any of these are missing or damaged, please contact your
dealer immediately, if possible, retain the carton including
the original packing material, and use them against to
repack the product in case there is a need to return it to us
for repair.
Standard Compliance
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3ab 1000Base-T
IEEE 802.3at Power over Ethernet
FCC Part 15 Class A, CE
PD (Powered Device) is a PoE-enabled terminal by PSE
and thus consumes energy, such as IP Phones, network
cameras and Wireless access points, etc
Note
PSE (Power Sourcing Equipment) is a
device (switch, or hub for instance) that will
provide power in a PoE setup. Maximum allowed
continuous output power per such device in
IEEE 802.3af is 15.4W, 30W in IEEE 802.3at.
Number of device can be
powered 1
Operating Temperature 0 ~ 50 Degree C
Storage Temperature -10 ~ 70 Degree C
Humidity 5 ~ 95% (Non-condensing)
Power over Ethernet
PoE Standard IEEE 802.3at High Power over Ethernet /
Mid-Span PSE
PoE Power Output DC 56V / 30 Watts
PoE Power Supply Type Mid-Span
Power Pin Assignment 4/5(+), 7/8(-)
Standards Conformance
Standards Compliance
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit
Ethernet
IEEE 802.3at Power over Ethernet
Regulation Compliance FCC Part 15 Class A, CE
5. Hardware Installation
This IEEE 802.3at Gigabit High Power over Ethernet Injector
provides three different running speeds 10Mbps, 100Mbps
and 1000Mbps in the same device and automatically
distinguishes the speed of incoming connection. Please
refer to following sections for detail information about IEEE
802.3at Gigabit High Power over Ethernet Injector.
5-1 POE-161:
The following section describes the hardware features of
POE-161. Before connecting any network device to the
POE-161, read this chapter carefully.
Before Installation
Before your installation, it is recommended to check your
network environment. If there is any IEEE 802.3at devices
need higher power to power on and work normally, the
POE-161 can provide you a way to supply power for this
Ethernet device conveniently and easily. The POE-161
equips with an AC-DC adapter with DC 56V input and
injects this DC power into the pin of the twisted pair cable
(pair 4, 5 and pair 7, 8).
If there is very difcult to nd a power socket for AC-DC
Adapter of your non IEEE 802.3at networked device, the
POE-161 and POE-162S can provide you a way to supply
DC power for this Ethernet device conveniently and easily.
- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
Note
The POE-161 and POE-162S can be installed
in pair. However, the use of third-party device
is allowed if the device complied with IEEE
802.3at Power over Ethernet.
POE-161, the Injector Installation
1. Connect the AC adapter to “DC 56V” of POE-161. The
power LED will be steady on.
2. Connect a standard network cable from Switch/worksta-
tion to port of POE-161.Ethernet
3. Connect the long cable that will be used to connect to
the remote device to the port “Ethernet + DC”.
4. Connect with IEEE 802.3at devices, due to the capability
of IEEE 802.3at Power over Ethernet, the POE-161 can
directly connect with any IEEE 802.3at end-nodes such
as PTZ (Pan, Tilt & Zoom) network cameras, PTZ Speed
Dome, color touch- screen Voice over IP (VoIP) tele-
phones, multi- channel wireless LAN access points where
support IEEE 802.3af In-line Power over Ethernet port.
The screen in Figure 2 appears.
POE-161 and POE-162S, the IEEE 802.3at Injector
Splitter Installation
1. Connect the AC adapter to “DC 56V” of POE-161. The
power LED will be steady on.
2. Connect a standard network cable from Ethernet+DC
port of POE-161 to “PoE In port of POE-162S. The POE
In-use LED of POE-161 / POE-162S will light on continu-
ance.
3. Connect a standard network cable from Switch/worksta-
tion to port of POE-161.Ethernet
4. Connect the UTP cable in the package from “Ethernet”
port of POE-162S to the RJ-45 port of remote device.
5. Adjust proper DC power output and connect DC plug
from of POE-162S to remote device.DC OUT
6. Power on the remote device and its power LED indicator
will remains on.
Switch
100 meters
PoE
PTZ Speed
Dome
POE-161
AC
1000Base-T UTP
PoE
1000Base-T UTP with PoE
Power Line (AC)
AC
Figure 2: Connection to IEEE 802.3at device
Once POE-161 detects the existence of an IEEE 802.3at
device, the POE In-use LED indicator will be steady on to
shows it is providing power.
Note
1. Since the POE-161 PoE port supports 56V
DC PoE power output, please check and
assure the Powered Device (PD) acceptable
DC power range is from 52 to 56V DC.
Otherwise, it will damage the Powered
Device (PD).
2. If the connected device is not fully complying
with IEEE 802.3at Power over Ethernet or in-
line power device, the LED indicator of POE-
161 will not be steady on.
Switch
POE-162S
POE-161
100 meters
PoE
DCDC
PTZ Camera
1000Base-T UTP
PoE
1000Base-T UTP with PoE
Power Line (DC)
DC
Power 12V/24V
Figure 3: Connection architecture over POE-161/POE-162S
Note
1. According to IEEE 802.3at Power over
Ethernet, the POE-161 will not inject power
to the cable if not connecting to IEEE
802.3at devices.
2. Please ensure the output voltage is correct
before applying power to remote device.
Customer Support
Thank you for purchase PLANET products. You can browse
our online FAQ resource at the PLANET Web site rst to
check if it could solve you issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=2
Switch support team mail address :
support_switch@planet.com.tw
Copyright © PLANET Technology Corp. 2011.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology
Corp. All other trademarks belong to their respective
owners.
EC Declaration of Conformity
For the following equipment:
*Type of Product : IEEE 802.3at High Power over Ethernet Injector (25 Watts)
*Model Number : POE-161
* Produced by:
Manufacturer‘s Name : Planet Technology Corp.
Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan (R.O.C.).
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility
Directive on (2004/108/EC).
For the evaluation regarding the EMC, the following standards were applied:
EN 55022 (CLASS A: 2006 + A1:2007)
EN 61000-3-2 (2006)
EN 61000-3-3 (1995+A1:2001+A2:2005)
EN 55024 (1998+A1:2001+A2:2003) EN 50130-4 (1995+A1:1998+A2:2003)
IEC 61000-4-2 (2008) EN 61000-4-2 (1995)
IEC 61000-4-3 (2008) EN 61000-4-3 (1996)
IEC 61000-4-4 (2004) EN 61000-4-4 (1995)
IEC 61000-4-5 (2005) EN 61000-4-5 (1995)
IEC 61000-4-6 (2008) EN 61000-4-6 (1996)
IEC 61000-4-8 (2009) EN 61000-4-11 (1994)
IEC 61000-4-11 (2004)
Responsible for marking this declaration if the:
Manufacturer Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name: Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
Person responsible for making this declaration
Name, Surname Kent Kang
Position / Title : Product Manager
Taiwan 27, Aug., 2010
Place Date Legal Signature
PLANET TECHNOLOGY CORPORATION
e-mail: sales@planet.com.tw http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528

Produktspezifikationen

Marke: Planet
Kategorie: Netzwerkkarte / Adapter
Modell: POE-161
Breite: 95 mm
Tiefe: 70 mm
Gewicht: 83 g
Produktfarbe: Weiß
Höhe: 25 mm
Gleichstrom-Anschluss (DC): Ja
Betriebstemperatur: 0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb: 5 - 95 %
Netzstandard: IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u
Zertifizierung: FCC Part 15 Class A, CE
Power over Ethernet (PoE): Ja
Netzteil Eingansgsspannung: 100 - 240 V
Anzahl Ethernet-LAN-Anschlüsse (RJ-45): 2
Warentarifnummer (HS): 85176990
Stromverbrauch (max.): 30 W
Gehäusematerial: Kunststoff
Ethernet LAN Datentransferraten: 10,100,1000 Mbit/s
LED-Anzeigen: Ja
Temperaturbereich bei Lagerung: -10 - 70 °C
Anzahl der basisschaltenden RJ-45 Ethernet Ports: 2
Basic Switching RJ-45 Ethernet Ports-Typ: Gigabit Ethernet (10/100/1000)
10G-Unterstützung: Nein
MAC-Adressentabelle: - Eintragungen
Routing-/Switching-Kapazität: - Gbit/s
Rack-Einbau: Nein
Netzteilfrequenz: 50/60 Hz
Anzahl enthaltener Produkte: 1 Stück(e)
Ethernet Schnittstellen Typ: Gigabit Ethernet
Verkabelungstechnologie: 10/100/1000Base-T
Wandmontage: Ja
Stapelbar: Nein
Netzteil enthalten: Nein
Power over Ethernet (PoE) Spannung: 56 V

Brauchst du Hilfe?

Wenn Sie Hilfe mit Planet POE-161 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Netzwerkkarte / Adapter Planet

Bedienungsanleitung Netzwerkkarte / Adapter

Neueste Bedienungsanleitung für -Kategorien-