Planet MGB-TSX Bedienungsanleitung

Planet Nicht kategorisiert MGB-TSX

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Planet MGB-TSX (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

Overview

Thank you for purchasing PLANET MGB family SFP

Mini-GBIC Gigabit Ethernet module. The MGB family

SFP Mini-GBIC Gigabit Ethernet module can install into

PLANET Switch products with SFP Mini-GBIC interface.

The distance can be extended from 100 meters (TP),

550 meters (Multi-mode, LC), up to 120 kilometers

(Single-mode, LC).

Note

Class 1 Laser Product

Complies with FDA Regulation 21 CFR

1040.10 and 1040.11.

Warning

Class 1 radiation is present when the

device or system is powered up.

Warning

Only trained and qualified personnel

should be allowed to install or replace

these modules.

1. Model List

Your MGB family SFP Mini-GBIC Gigabit Ethernet module

comes with one of the following models.

Gigabit Ethernet SFP Module List

Model Interface Connector type and distance

MGB-GT 1000Base-T Module RJ-45, 100m

MGB-SX 1000Base-SX Module LC, MM, 550m

MGB-LX 1000Base-LX Module LC, SM, 10km

MGB-L30 1000Base-LX Module LC, SM, 30km

MGB-L50 1000Base-LX Module LC, SM, 50km

MGB-L70 1000Base-LX Module LC, SM, 70km

MGB-L120 1000Base-LX Module LC, SM, 120km

MGB-LA10 1000Base-LX Module LC WDM (TX:1310nm), SM, 10km

MGB-LB10 1000Base-LX Module LC WDM (TX:1550nm), SM, 10km

MGB-LA20 1000Base-LX Module LC WDM (TX:1310nm), SM, 20km

MGB-LB20 1000Base-LX Module LC WDM (TX:1550nm), SM, 20km

MGB-LA40 1000Base-LX Module LC WDM (TX:1310nm), SM, 40km

MGB-LB40 1000Base-LX Module LC WDM (TX:1550nm), SM, 40km

MGB-TSX 1000Base-SX Module LC, MM, 550m (-40~75°C)

MGB-TLX 1000Base-LX Module LC, SM, 10km (-40~75°C)

MGB-TL30 1000Base-LX Module LC, SM, 30km (-40~75°C)

MGB-TL70 1000Base-LX Module LC, SM, 70km (-40~75°C)

Models with LX or last two numbered characters

indicate the ber-port is with “Single-Mode” optic

ber connector and the number indicates the maximum

distance in km.

2. Checklist

Your MGB carton should contain the following items:

The MGB family SFP Mini-GBIC Gigabit Ethernet

Module

This User’s Manual

If any item is missing or damaged, please consult the

dealer from whom you purchased your MGB family SFP

Mini-GBIC Gigabit Ethernet module.

3. Introduction

3-1 1-Port 1000Base-T SFP Mini-GBIC

Module - MGB-GT

Features:

● Comply with IEEE 802.3ab Gigabit Ethernet standard

● 1 x 1000Base-T port (RJ-45 connector)

● Up to 100m over 4-pair UTP Cat.5/5e cable

● Plug & Play Installation

● 0 to 50 Degree C operation temperature

3-2 1-Port 1000Base-SX / LX SFP Mini-GBIC

Modules - MGB-SX / MGB-LX / MGB-L30

/ MGB-L50 / MGB-L70 / MGB-L120

Features:

● Comply with the IEEE 802.3z Gigabit Ethernet stan-

dard

● 1 x 1000Mbps LC ber port

● Plug and Play Installation

● 0 to 50 Degree C operation temperature

Note

The MGB-L30, MGB-L50, MGB-L70 and

MGB-120 SFP transceivers provide the

optical power budget from 19dB to 30dB.

When shorter distance of single-mode fiber

cables is used, you might need to insert

an in-line optical attenuator in the link to

avoid overloading of the transceiver.

SFP Model

In-line

Optical

Attenuator

MGB-

L30

MGB-

L50

MGB-

L70

MGB-

L120

Fiber Cable Length

≤ 25Km 2-dB 10-dB 15-dB 25-dB

25Km < Fiber Cable

Length < 50Km -- -- 8-dB 20-dB

3-3 1-Port 1000Base-LX WDM SFP

Mini-GBIC Modules - MGB-LA10 / LB10,

MGB-LA20 / LB20, MGB-LA40 / LB40

Features:

● Comply with the IEEE 802.3z Gigabit Ethernet stan-

dard

● 1 x 1000Mbps LC ber port (single LC ber connec-

tors)

● Plug and Play Installation

● 0 to 50 Degree C operation temperature

Note

1. The fiber connector and distance

support will be different by various

models.

2. The MGB-LAxx / LBxx should runs in

pair. It means you must connect MGB-

LAxx in one end and another MGB-LBxx

in the other end, for example LA10 to

LB10 where only one single mode optic

wire is required.

3. The MGB-LA10, MGB-LB10, MGB-LA20,

MGB-LB20 and MGB-LA40, MGB-LB40

SFP transceivers provide the optical

power budget from 12dB to 20dB.

When shorter distance of single-mode

fiber cables is used, you might need

to insert an in-line optical attenuator

in the link to avoid overloading of the

transceiver.

SFP Model

In-line

Optical

Attenuator

MGB-

LA10

MGB-

LB10

MGB-

LA20

MGB-

LB20

MGB–

LA40

MGB-

LB40

Fiber Cable Length

≤

5Km 2-dB 6-dB 14-dB

5Km < Fiber Cable

Length < 30Km 2-dB --- 4-dB

3-4 1-Port 1000Base-SX / LX SFP Mini-GBIC

Modules - MGB-TSX / MGB-TLX /

MGB-TL30 / MGB-TL70

Features:

● Comply with the IEEE 802.3z Gigabit Ethernet stan-

dard

● 1 x 1000Mbps LC ber port

● Plug and Play Installation

● -40 to 75 Degree C operation temperature

Note

The MGB-TL30 and MGB-TL70 SFP

transceivers provide the optical power

budget of 21dB and 24dB. When shorter

distance of single-mode ber cables is

used, you might need to insert an in-

line optical attenuator in the link to avoid

overloading of the transceiver.

SFP Model

In-line Optical

Attenuator

MGB-

TL30

MGB-

TL70

Fiber Cable Length

≤

25Km 2-dB 15-dB

25Km < Fiber Cable Length

< 50Km -- 8-dB

- 9 -

- 10 -

- 11 -

4 Installing SFP Mini-GBIC Modules

4.1 Install the module

Please follow these steps to install the SFP Mini-GBIC

modules:

1. Power on the Switch and place the Switch on a at

surface. Install the new SFP Mini-GBIC modules

by inserting it into the slots and sliding it in until it

stops (See Figure 1). Press it rmly until you feel

the module snap into place. Never force, twist or

bend the SFP Mini-GBIC modules. The SFP Mini-GBIC

module slides in smoothly and the Switch will auto-

matically detect the new module.

Figure 1: Insert the SFP Mini-GBIC modules

2. After the TP/ber connection was built successfully.

Check the LEDs to verify that if there is a link and a

proper connection at the port.

Please refer to the Switch’s user’s manual for more

about Switch or module’s management.

4.2 Remove the module

1. Make sure there is no network

activity by consult or check with the

network administrator. Or through

the management interface of the

switch (if available) to disable the

port in advance.

2. Remove the UTP cable or the Fiber Optic Cable gently.

3. Turn the handle of the MGB module to horizontal.

4. Pull out the module gently through the handle.

Warning

Never pull out the module without pull the

handle or the push bolts on the module.

Direct pull out the module with violent

could damage the module and the SFP

module slot of the device.

Produktspezifikationen

Marke:	Planet
Kategorie:	Nicht kategorisiert
Modell:	MGB-TSX
Betriebstemperatur:	-40 - 75 °C
Netzstandard:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z
Warentarifnummer (HS):	85369010
Plug & Play:	Ja
Maximale Datenübertragungsrate:	1000 Mbit/s
Schnittstelle:	mini-GBIC
Anzahl enthaltener Produkte:	1 Stück(e)
SFP Transceiver-Typ:	Faseroptik
Maximal mögliche Übertragungsstrecke:	550 m
Wellenlänge:	850 nm
Hot-Plug-Unterstützung:	Ja
Optischer Kabelverbinder:	LC
Single-Mode-Faser (SMF) unterstützt:	Nein
Anzahl Faseranschlüsse:	1
SFP-Transceiver-Standard:	SX
Duplex-System:	Full, Half