Planet IGS-1600T Bedienungsanleitung

Planet Nicht kategorisiert IGS-1600T

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Planet IGS-1600T (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/2

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET Industrial Multi-port

10/100/1000T Gigabit Ethernet Switch, IGS-1600T/IGS-1820TF.

In the following sections, the term “Industrial Ethernet

Switch” means the IGS-1600T or IGS-1820TF.

Open the box of the Industrial Ethernet Switch and carefully

unpack it. The box should contain the following items:

Industrial Ethernet

Switch x 1

User’s Manual x 1 RJ45 Dust Cap x 16

DIN-rail Kit Wall-mount Kit SFP Dust Cap x 2

(IGS-1820TF only)

If any of these are missing or damaged, please contact your

dealer immediately; if possible, retain the carton including the

original packing material, and use them again to repack the

product in case there is a need to return it to us for repair.

2.2 LEDDenition:

 System

LED Color Function

P1 Green Lights Lights to indicate power input 1

has power.

P2 Green Lights Lights to indicate power input 2

has power.

Fault LightsRed Lights to indicate that AC or DC

power has failed.

 Per 10/100/1000BASE-T Port

LED Color Function

1000

LNK/ACT Green

Lights

To indicate the link through that

port is successfully established at

1000Mbps.

Blinks

To indicate that the switch is

actively sending or receiving data

over that port.

10/100

LNK/ACT Amber

Lights To indicate the port is successfully

established at 10/100Mbps.

Blinks

To indicate that the Switch is

actively sending or receiving data

over that port.

2.5 WiringtheFaultAlarmContact

The fault alarm contacts are in the middle of the terminal block

connector as the picture shows below. Inserting the wires, the

Industrial Ethernet Switch will detect the fault status of the

power failure, and then forms an open circuit. The following

illustration shows an application example for wiring the fault

alarm contacts.

Fault Alarm Contacts

The Fault Alarm Contacts are

energized (CLOSE) for normal

operation and will OPEN when

failure occurs

Fault

Insert the wires into the fault alarm contacts

Note

1. The wire gauge for the terminal block should be

in the range between 12 and 24 AWG.

2. Alarm relay circuit accepts up to 24V, max. 1A

currents.

2.4 WiringthePowerInputs

The 6-contact terminal block connector on the top panel of

Industrial Ethernet Switch is used for two redundant power

inputs. Please follow the steps below to insert the power wire.

Caution

When performing any of the procedures like

inserting the wires or tightening the wire-clamp

screws, make sure the power is OFF to prevent

from getting an electric shock.

Insert positive and negative DC power wires into contacts 1

and 2 for POWER 1, or contacts 5 and 6 for POWER 2.

Fault

V1+ V2+

PWR2PWR1

Max. fault loading: 24V, 1A

DC Input: 12-48V , 1.5A max.

AC Input: 24V , 1A max .

1 2 3 4 5 6

2.HardwareIntroduction

2.1 SwitchFrontPanel

The front panel of the consists of Industrial Ethernet Switch

Ethernet interfaces and LED indicators.

 Front View

FaultP2P1

ACT1000 LNK

ACT10/100 LNK

FaultP2P1

ACT1000 LNK

ACT10/100 LNK

1000 LNK/ACT

Figure1:

IGS-1600T Front View

Figure2:

IGS-1820TF Front View

Per1000BASE-XSFPPort

 (Port-17andPort-18ofIGS-1820TF)

LED Color Function

LNK/ACT Green

Lights To indicate the port is successfully

established at 1000Mbps.

Blinks

To indicate that the Switch is

actively sending or receiving data

over that port.

2.3 SwitchUpperPanel

The upper panel of the Industrial Ethernet Switch consists of

one terminal block connector within two power input and one

relay output.

Fault

V1+ V2+

PWR2PWR1

Max. fault loading: 24V, 1A

DC Input: 12-48V , 1.5A max.

AC Input: 24V , 1A max.

1 2 3 4 5 6

Figure3:IGS-1600T and IGS-1820TF Top View

Tighten the wire-clamp screws for preventing the wires from

loosening.

1 2 3 4 5 6

Power 1 Power 2Fault

+ - + -

Note

1. The wire gauge for the terminal block should be

in the range between 12 and 24 AWG.

2. The power input range is DC 12V ~ 48V and

supports AC 24V.

3. Use one power input when using AC 24V.

2.6 GroundingtheDevice

Users MUST complete grounding wired with the device;

otherwise, a sudden lightning could cause fatal damage to the

device.

Fault

V1+ V2+

PWR2PWR1

Max. fault loading: 24V, 1A

DC Input: 12-48V , 1.5A max.

AC Input: 24V , 1A max.

1 2 3 4 5 6

Earth Ground

Note

EMD (Lightning) DAMAGE IS NOT CONVERED UNDER

WARRANTY.

- 9 -

- 10 -

- 11 -

- 12 - - 13 - - 14 -

3.Installation

This section describes the functionalities of the Industrial

Ethernet Switch’s components and guides you to installing it

on the DIN rail and wall. Please read this chapter completely

before continuing.

Note

This following pictures show how to install the device.

However, the device in the picture is not IGS-1600T

or IGS-1820TF.

3.1 DIN-railMountingInstallation

3.2 Wall-mountPlateMounting

Flow Control IEEE 802.3x pause frame for full duplex

Back pressure for half duplex

ESD Protection 6KV DC

Enclosure IP30 metal case

Installation DIN-rail kit and wall-mount kit

Connector

Removable 6-pin terminal block for power

input

Pin 1/2 for Power 1, Pin 3/4 for fault alarm,

Pin 5/6 for Power 2

Alarm One relay output for power failure. Alarm relay

current carry ability: 1A @ 24V DC

Dimensions

(W x D x H) 66 x 107 x 152 mm 66 x 107 x 152 mm

Weight 743g 745g

Power

Requirements Dual DC 12~48V, AC 24V

Power

Consumption

DC input:

Max. 3.4 watts/

11.6BTU

(System on)

Max. 8.7 watts/

29.7BTU

(Full loading)

DC input:

Max. 3.4 watts/

11.6BTU

(System on)

Max. 11.1 watts/

37.9BTU

(Full loading)

AC input:

Max. 5 watts/17BTU

(System on)

Max. 13.99 watts/

47.8BTU

(Full loading)

AC input:

Max. 6 watts/20.5BTU

(System on)

Max. 15 watts/51.2BTU

(Full loading)

3.3 SideWall-mountPlateMounting

4.ProductSpecications

Product IGS-1600T IGS-1820TF

Hardware Specifications

Gigabit Ethernet

Copper Ports

16 10/100/1000BASE-T RJ45 auto-MDI/MDI-X

ports

Gigabit SFP

Slots -- Two 1000BASE-SX/LX/

BX SFP interfaces

Switch

Architecture Store-and-Forward

Switch Fabric 32Gbps (non-blocking) 36Gbps (non-blocking)

Throughput

(packet per

second)

23.81Mpps@ 64 bytes 26.79Mpps@ 64 bytes

Address Table 8K entries, automatic source address learning

and aging

Shared Data

Buffer 4.1Mbits

Standards Conformance

Regulatory

Compliance FCC Part 15 Class A, CE

Stability Testing

IEC60068-2-32 (free fall)

IEC60068-2-27 (shock)

IEC60068-2-6 (vibration)

Standards

Compliance

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-

IEEE 802.3ab

1000BASE-T

IEEE 802.3x flow

control and back

pressure

IEEE 802.1p Class of

Service

IEEE 802.3az Energy

Efficient Ethernet

(EEE)

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-

IEEE 802.3ab

1000BASE-T

IEEE 802.3z

1000BASE-SX/LX

IEEE 802.3x flow

control and back

pressure

IEEE 802.1p Class of

Service

IEEE 802.3az Energy

Efficient Ethernet

(EEE)

Environment

Operating

Temperature -40 ~ 75 degrees C

Storage

Temperature -40 ~ 85 degrees C

Humidity 5 ~ 95% (non-condensing)

5.CustomerSupport

Thank you for purchasing PLANET products. You can browse

our online FAQ resource on PLANET web site rst to check if it

could solve your issue. If you need more support information,

please contact PLANET switch support team.

PLANET online FAQs:

http://www.planet.com.tw/en/support/faq

Switch support team mail address:

support@planet.com.tw

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.

All other trademarks belong to their respective owners.

FCCWarning

This equipment has been tested and found to comply with the

regulations for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment

is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with this user’s guide,

may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely

to cause harmful interference, in which case the user will be

required to correct the interference at his own expense.

CEMarkWarning

This device is compliant with Class A of CISPR 32. In a

residential environment this equipment may cause radio

interference.

WEEEWarning

To avoid the potential eects on the environment and

human health as a result of the presence of

hazardous substances in electrical and electronic

equipment, end users of electrical and electronic

equipment should understand the meaning of the crossed-out

wheeled bin symbol. Do not dispose of WEEE as unsorted

municipal waste and have to collect such WEEE separately.

Produktspezifikationen

Marke:	Planet
Kategorie:	Nicht kategorisiert
Modell:	IGS-1600T
Breite:	66 mm
Tiefe:	107 mm
Gewicht:	743 g
Produktfarbe:	Blau
Internationale Schutzart (IP-Code):	IP30
Höhe:	152 mm
DC input Spannung:	12 - 48 V
Betriebstemperatur:	-40 - 75 °C
Relative Luftfeuchtigkeit in Betrieb:	5 - 95 %
Netzstandard:	IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Zertifizierung:	FCC 15 A, CE\nIEC60068-2-32, IEC60068-2-27, IEC60068-2-6
Vollduplex:	Ja
Power over Ethernet (PoE):	Nein
Warentarifnummer (HS):	85176990
Stromverbrauch (max.):	8.7 W
Gehäusematerial:	Metall
Temperaturbereich bei Lagerung:	-40 - 85 °C
Switch-Typ:	Unmanaged
Anzahl der basisschaltenden RJ-45 Ethernet Ports:	16
Basic Switching RJ-45 Ethernet Ports-Typ:	Gigabit Ethernet (10/100/1000)
Auto MDI/MDI-X:	Ja
10G-Unterstützung:	Nein
Kupfer Ethernet Verkabelungstechnologie:	10BASE-T, 100BASE-TX, 1000BASE-T
MAC-Adressentabelle:	8000 Eintragungen
Routing-/Switching-Kapazität:	32 Gbit/s
Durchgang:	23.81 Mpps
Jumbo Frames Unterstützung:	Ja
Wandmontage:	Ja
Store-and-Forward:	Ja
Auto-Negotiation-Funktion:	Ja
Unterstützung Datenflusssteuerung:	Ja
Jumbo-Frames:	10000
Datenpaket-Pufferspeicher:	4.1 MB
Switch-Ebene:	L2
Selbstlernen von MAC-Adressen unterstützt:	Ja
Auto-Alterung von MAC-Adressen unterstützt:	Ja
DIN-Schienen-Montage:	Ja