Planet GSW-2824P Bedienungsanleitung

Planet Schalten GSW-2824P

Lesen Sie kostenlos die ๐Ÿ“– deutsche Bedienungsanleitung fรผr Planet GSW-2824P (4 Seiten) in der Kategorie Schalten. Dieser Bedienungsanleitung war fรผr 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET 24-Port 10/100/1000T 802.3at PoE +
2-Port 10/100/1000T + 2-Port Gigabit TP/SFP Combo Ethernet Switch,
GSW-2824P. โ€œ802.3at PoE+ Switchโ€ mentioned in this Guide refers to
the GSW-2824P.
Open the box of the 802.3at PoE+ Switch and carefully unpack it. The
box should contain the following items:
The 802.3at PoE+ Switch x 1 Userโ€™s Manual x 1 Power Cord x 1
SFP Dust Cap
x 2 Screws x 8 Rack-mounting
Brackets x 2 Rubber Feet x 4
If any of these pieces are missing or damaged, please contact your
dealer immediately; if possible, retain the carton including the original
packing material, and use them again to repack the product in case
there is a need to return it to us for repair.
โˆ’๎˜ƒ VLAN๎˜ƒ mode:๎˜ƒ Ports๎˜ƒ 1~24๎˜ƒ cannot๎˜ƒ communicate๎˜ƒ with๎˜ƒ each๎˜ƒ other,๎˜ƒ
but๎˜ƒ can๎˜ƒ communicate๎˜ƒ with๎˜ƒ the๎˜ƒ uplink๎˜ƒ ports๎˜ƒ 25~28๎˜ƒ and๎˜ƒ SFP๎˜ƒ
ports๎˜ƒ27~๎˜ƒ28
โˆ’๎˜ƒ Extend๎˜ƒ mode:๎˜ƒ Ports๎˜ƒ 1~8๎˜ƒ have๎˜ƒ data๎˜ƒ rate๎˜ƒ of๎˜ƒ 10Mbps.๎˜ƒ The๎˜ƒ
farthest transmis-sion distance is up to 250 meters and all
ports can communicate with each other.
๏ƒ˜๎˜ƒ VLAN๎˜ƒ mode๎˜ƒ is๎˜ƒ to๎˜ƒ isolate๎˜ƒ ports๎˜ƒ to๎˜ƒ prevent๎˜ƒ broadcast๎˜ƒ storm๎˜ƒ and๎˜ƒ
defend๎˜ƒDHCP๎˜ƒspoo๎šฟng
๏ƒ˜ Automatic address learning and address aging
๏ฎ Hardware
๏ƒ˜ 19-inch rack-mount size, 1U height
๏ƒ˜ LED indicators for system power, per port PoE ready and PoE
activity,๎˜ƒspeed,๎˜ƒLink/Act
๏ƒ˜๎˜ƒ 2๎˜ƒfans๎˜ƒto๎˜ƒprovide๎˜ƒstable๎˜ƒand๎˜ƒe๎ง’cient๎˜ƒpower๎˜ƒperformance
๏ƒ˜๎˜ƒ Supports๎˜ƒ contact๎˜ƒ discharge๎˜ƒ of๎˜ƒยฑ6KV๎˜ƒ DC๎˜ƒ and๎˜ƒ air๎˜ƒ distance๎˜ƒ discharge๎˜ƒ
of๎˜ƒยฑ8KV๎˜ƒDC๎˜ƒfor๎˜ƒEthernet๎˜ƒESD๎˜ƒprotection
๏ƒ˜๎˜ƒ Supports๎˜ƒยฑ6KV๎˜ƒsurge๎˜ƒimmunity
3.๎˜ƒProduct๎˜ƒSpeci๎šฟcations
Model GSW-2824P
Hardware๎˜ƒSpeci๎šฟcations
10/100/1000BASE-T
Copper Ports 28 auto MDI/MDIX
1000BASE-X SFP/
mini-GBIC Slots 2
4.2 LED Indicators
๏ฎ System
LED Color Function
PWR Green Lights to indicate the Switch has power.
๏ฎ Per 10/100/1000BASE-T Port (port 1~28)
LED Color Function
1000
LNK/ACT Green
Lights to indicate the link through that
port is successfully established.
Blinks to indicate that the Switch is
actively๎˜ƒsending๎˜ƒor๎˜ƒre-ceiving๎˜ƒdata๎˜ƒover๎˜ƒ
that port.
10/100
LNK/ACT Amber
Lights to indicate the link through that
port is successfully established.
Blinks to indicate that the Switch is
actively๎˜ƒsending๎˜ƒor๎˜ƒre-ceiving๎˜ƒdata๎˜ƒover๎˜ƒ
that port.
PoE in Use
(port๎˜ƒ1~24) Amber Lights๎˜ƒto๎˜ƒindicate๎˜ƒthe๎˜ƒport๎˜ƒis๎˜ƒproviding๎˜ƒ
PoE DC in-line power.
๏ฎ Per 1000BASE-X SFP combo Interface (port 27~28)
LED Color Function
1000
LNK/ACT Green
Lights to indicate the link through that port
is successfully established at 1000Mbps.
Blinks๎˜ƒto๎˜ƒindicate๎˜ƒthat๎˜ƒthe๎˜ƒSwitch๎˜ƒis๎˜ƒactively๎˜ƒ
sending๎˜ƒor๎˜ƒreceiving๎˜ƒdata๎˜ƒover๎˜ƒthat๎˜ƒport.
Switch
Throughput@64bytes 41.66Mpps
MAC Address Table 8K entries
Jumbo Frame 9216 bytes
Flow Control IEEE 802.3x pause frame for full duplex;
back pressure for half duplex
Power๎˜ƒover๎˜ƒEthernet
PoE Standard IEEE๎˜ƒ802.3at๎˜ƒPower๎˜ƒover๎˜ƒEthernet๎˜ƒPlus/PSE
PoE Injector Ports 24
PoE Power Supply
Type End-span:๎˜ƒ1/2๎˜ƒ(+),๎˜ƒ3/6๎˜ƒ(-)
PoE Power Output
Per๎˜ƒport๎˜ƒ54ยฑ1V๎˜ƒDC,๎˜ƒ300mA.๎˜ƒmax.๎˜ƒ15.4๎˜ƒ
watts๎˜ƒ(IEEE๎˜ƒ802.3af)
Per๎˜ƒport๎˜ƒ54ยฑ1V๎˜ƒDC,๎˜ƒ600mA.๎˜ƒmax.๎˜ƒ32๎˜ƒwatts๎˜ƒ
(IEEE๎˜ƒ802.3at)
PoE Power Budget 250 watts
Number of PDs,
7 watts 24
Number of PDs,
15.4 watts 16
Number of PDs,
30 watts 8
Standards Conformance
Regulatory
Compliance FCC Part 15 Class A, CE
2. Product Features
๏ฎ Physical Port
๏ƒ˜ 24-port 10/100/1000BASE-T RJ45 copper with PoE injector func-
tion
๏ƒ˜ 4 10/100/1000BASE-T RJ45 copper interfaces
๏ƒ˜๎˜ƒ 2๎˜ƒ1000BASE-X๎˜ƒSFP๎˜ƒcombo๎˜ƒinterfaces,๎˜ƒshared๎˜ƒwith๎˜ƒPorts๎˜ƒ27~28
๏ฎ๎˜ƒ Power๎˜ƒover๎˜ƒEthernet
๏ƒ˜๎˜ƒ Complies๎˜ƒ with๎˜ƒ IEEE๎˜ƒ 802.3at๎˜ƒ Power๎˜ƒ over๎˜ƒ Ethernet๎˜ƒ Plus๎˜ƒ end-span๎˜ƒ
PSE
๏ƒ˜๎˜ƒ Up๎˜ƒ to๎˜ƒ 24๎˜ƒ ports๎˜ƒ of๎˜ƒ IEEE๎˜ƒ 802.3af/802.3at๎˜ƒ devices๎˜ƒ powered๎˜ƒ (ports๎˜ƒ
1~24)
๏ƒ˜ Supports PoE power up to 32 watts for each PoE port, with a total
PoE budget of 250W.
๏ƒ˜๎˜ƒ Each๎˜ƒport๎˜ƒsupports๎˜ƒ54V๎˜ƒDC๎˜ƒpower๎˜ƒto๎˜ƒPoE๎˜ƒpowered๎˜ƒdevice.
๏ƒ˜๎˜ƒ Auto๎˜ƒdetects๎˜ƒpowered๎˜ƒdevice๎˜ƒ(PD)
๏ƒ˜๎˜ƒ Supports๎˜ƒPD๎˜ƒalive๎˜ƒfunction.
๏ƒ˜๎˜ƒ Circuit๎˜ƒprotection๎˜ƒprevents๎˜ƒpower๎˜ƒinterference๎˜ƒbetween๎˜ƒports.
๏ƒ˜ Remote power feeding up to 100m in standard mode with 250m in
extend mode
๏ฎ Switching
๏ƒ˜ Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/
MDI-X
๏ƒ˜๎˜ƒ Supports๎˜ƒ IEEE802.3x๎˜ƒ ๎›€ow๎˜ƒ control๎˜ƒ in๎˜ƒ full-duplex๎˜ƒ mode๎˜ƒ and๎˜ƒ back-
pressure in half-duplex mode
๏ƒ˜ Integrates address look-up engine, supporting 8K absolute MAC
addresses
๏ƒ˜๎˜ƒ 9K๎˜ƒjumbo๎˜ƒframe๎˜ƒsupports๎˜ƒall๎˜ƒspeeds๎˜ƒ(10/100/1000Mbps)
๏ƒ˜ Hardware-based DIP switch for or mode Standard, VLAN Extend
selection;
DIP Switch
Selectable operation mode
๏ƒ˜ Standard
๏ƒ˜ VLAN
๏ƒ˜ Extend
Dimensions
(W๎˜ƒx๎˜ƒD๎˜ƒx๎˜ƒH) 207.3๎˜ƒx๎˜ƒ441.5๎˜ƒx๎˜ƒ44๎˜ƒmm๎˜ƒ(1U๎˜ƒheight)
Enclosure Metal
Weight 3022g
Power Requirements 100~240V๎˜ƒAC,๎˜ƒ50/60Hz,๎˜ƒ5A๎˜ƒmax.
Power Consumption/
Dissipation Max. 298 watts/1017 BTU
Thermal Fan 2
ESD Protection Contact๎˜ƒdischarge๎˜ƒof๎˜ƒยฑ6KV๎˜ƒDC,
Air๎˜ƒdischarge๎˜ƒof๎˜ƒยฑ8KV๎˜ƒDC
Surge Protection ยฑ6KV
Installation Desktop or rack-mount installation
LED
System
๎˜ƒ๎˜ƒ๎˜ƒPower๎˜ƒ(Green)
10/100/1000T RJ45 Interfaces
๎˜ƒ๎˜ƒ๎˜ƒ1000๎˜ƒLNK/ACT๎˜ƒ(Green)
1000X SFP Interfaces
๎˜ƒ๎˜ƒ๎˜ƒ1000๎˜ƒLNK/ACT๎˜ƒ(Green)
Switching
Switch Architecture Store-and-Forward
Switch Fabric 56Gbps
Standards
Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE๎˜ƒ802.3x๎˜ƒ๎›€ow๎˜ƒcontrol๎˜ƒand๎˜ƒback๎˜ƒpressure
IEEE๎˜ƒ802.3af๎˜ƒPower๎˜ƒover๎˜ƒEthernet
IEEE๎˜ƒ802.3at๎˜ƒPower๎˜ƒover๎˜ƒEthernet๎˜ƒPlus
IEEE๎˜ƒ802.3az๎˜ƒEnergy๎˜ƒE๎ง’cient๎˜ƒEthernet
Environment
Operating
Temperature:๎˜ƒ0๎˜ƒ~๎˜ƒ50๎˜ƒdegrees๎˜ƒC
(non-condensing)
Storage Relative๎˜ƒHumidity:๎˜ƒ5๎˜ƒ~๎˜ƒ95%
(non-condensing)
4. Hardware Introduction
4.1 Front Panel
The Front Panel of the 802.3at PoE+ Switch consists of 24-Port
10/100/1000T + 2-Port 10/100/1000T + 2-Port Gigabit TP/SFP Combo
ports. The LED Indicators are also located on the front panel of the
802.3at PoE+ Switch.
PWR
1
2
3
4
1 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 19 20 21 22 23 2411
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
1 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 19 20 21 22 23 2411
26
25
28
27 27 28
Standard
VLAN
Extend
10/100
1000
LNK/ ACT
LNK/ ACT
PoE-in-Us e
1000X SFP
Figure 4-1: GSW-2824P Switch Front Panel
4.3 Multiple Functions of DIP Switch
The๎˜ƒ front๎˜ƒ panel๎˜ƒ of๎˜ƒ the๎˜ƒ 802.3at๎˜ƒ PoE+๎˜ƒSwitch๎˜ƒ provides๎˜ƒ one๎˜ƒ DIP๎˜ƒ switch๎˜ƒ for๎˜ƒ
Standard, VLAN or Extend mode selection. The detailed descriptions
are shown in the following table.
DIP Switch Mode Function
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch
operate as a general switch and all PoE
ports operate at 10/100/1000Mbps auto-
negotiation. All ports can communicate with
one another.
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch
operate as a switch andVLAN isolation
1.๎˜ƒ Ports๎˜ƒ1๎˜ƒto๎˜ƒ24๎˜ƒwill๎˜ƒisolate๎˜ƒrespectively.
2. Ports 1 to 24 can only communicate with
ports๎˜ƒ25~28.
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch
operate as a Long Reach PoE switch and
1. Ports 1 to 8 support farthest transmission
distance of up to 250 meters
2.๎˜ƒ Ports๎˜ƒ1๎˜ƒto๎˜ƒ8๎˜ƒhave๎˜ƒa๎˜ƒdata๎˜ƒrate๎˜ƒof๎˜ƒ10Mbps
3. All ports can communicate with one
anothe.
Note
Please adjust the DIP switch before powering on the
802.3at PoE+ Switch.
- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
Standard Mode (default)
Power
100 meters (328 feet)
PoE
PoE
10BASE-T UTP with PoE
PoE IP Camera
GSW-2824P
Standard
VLAN
Extend
VLAN Isolation Mode
NVR
PC
Ports 1 to 24
Access Denied
PoE
PoE
PoE
PoE
100BASE-TX UTP with PoE
GSW-2824P
IP Camera
IP Camera
IP Camera
Ports 25~28
to Ports 1~24 Access Permitted
1000BASE-T UTP
Standard
VLAN
Extend
Extend Mode
Ports 1 to 8
Power
250 meters (820 feet)
PoE
PoE
10BASE-T UTP with PoE
PoE IP Camera
GSW-2824P
Standard
VLAN
Extend
5. Hardware Installation
5.1 Rack Mounting
To install the 802.3at PoE+ Switch in a 19-inch standard rack, follow the
instructions de-scribed below.
Step 1:๎˜ƒ Place๎˜ƒ your๎˜ƒ 802.3at๎˜ƒ PoE+๎˜ƒ Switch๎˜ƒ on๎˜ƒ a๎˜ƒ hard๎˜ƒ ๎›€at๎˜ƒ surface,๎˜ƒ with๎˜ƒ
the front panel positioned towards your front side.
Step 2: Attach a rack-mount bracket to each side of the 802.3at PoE+
Switch with sup-plied screws attached to the package. Figure
5-1 shows how to attach brackets to one side of the 802.3at
PoE+ Switch.
PWR
1
2
3
4
123456 7 89 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
1234
56789 10 1112 131 4
1516 1718 19 20 2122 2324 26
25
2
8
27 27 28
Standard
VLAN
Ext end
10/10
0
1000
LN
K/AC T
LNK/AC T
Po
E-in-Use
1000X S
FP
Figure 5-1: Attaching the Brackets to the 802.3at PoE+ Switch.
Caution
You must use the screws supplied with the mounting
brackets. Dam-age caused to the parts by using incorrect
screws๎˜ƒwould๎˜ƒinvalidate๎˜ƒthe๎˜ƒwarranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the
opposite side.
4.4 Rear Panel
The rear panel of the 802.3at PoE+ Switch indicates an AC power
socket,๎˜ƒwhich๎˜ƒaccepts๎˜ƒinput๎˜ƒpower๎˜ƒfrom๎˜ƒ100๎˜ƒto๎˜ƒ240V๎˜ƒAC,๎˜ƒ50-60Hz,๎˜ƒ5A.
50/60Hz
100-240V , 5A max.
Figure 4-2: GSW-2824P Switch Rear Panel
๏ฎ AC Power Receptacle
Power
Notice
The๎˜ƒ device๎˜ƒ is๎˜ƒ a๎˜ƒ power-required๎˜ƒ device,๎˜ƒ which๎˜ƒ means๎˜ƒ it๎˜ƒ
will not work till it is powered. If your networks should
be๎˜ƒ active๎˜ƒ all๎˜ƒ the๎˜ƒ time,๎˜ƒ please๎˜ƒ con-sider๎˜ƒ using๎˜ƒ UPS๎˜ƒ
(Uninterrupted๎˜ƒ Power๎˜ƒ Supply)๎˜ƒ for๎˜ƒ your๎˜ƒ device.๎˜ƒ It๎˜ƒ will๎˜ƒ
prevent๎˜ƒyou๎˜ƒfrom๎˜ƒnetwork๎˜ƒdata๎˜ƒloss๎˜ƒor๎˜ƒnetwork๎˜ƒdowntime.
Power
Notice
In๎˜ƒ some๎˜ƒ areas,๎˜ƒ installing๎˜ƒ a๎˜ƒ surge๎˜ƒ suppression๎˜ƒ device๎˜ƒ may๎˜ƒ
also help to protect your 802.3at PoE+ Switch from being
damaged by unregulated surge or current to the 802.3at
PoE+ Switch or the power adapter.
Step 5: After the brackets are attached to the 802.3at PoE+ Switch,
use suitable screws to se-curely attach the brackets to the
rack, as shown in Figure 5-2.
PWR
1
2
3
4
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
18
19 20
21 222
3 24
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
1 2 3 4 5 6 7 8 910 1112 1 3
14 15 16 1718 19 20 2122 232 4 26
25
28
27
27 28
Standard
VLA N
Ext end
10/100
1000
LNK/A C T
LNK/A C T
PoE-in-Use
1000X
SFP
Figure 5-2: Mounting the 802.3at PoE+ Switch in a Rack
Step 6: Connect your 802.3at PoE+ Switch to 802.3af/802.3at
complied๎˜ƒPDs๎˜ƒand๎˜ƒother๎˜ƒnetwork๎˜ƒdevices.
A. Connect one end of a standard network cable to the
10/100/1000BASE-T RJ45 ports on the front panel of the 802.3at
PoE+ Switch.
B.๎˜ƒ Connect๎˜ƒ the๎˜ƒother๎˜ƒend๎˜ƒof๎˜ƒ the๎˜ƒcable๎˜ƒto๎˜ƒ the๎˜ƒnetwork๎˜ƒ devices๎˜ƒsuch๎˜ƒas๎˜ƒ
printer๎˜ƒservers,๎˜ƒworkstations๎˜ƒor๎˜ƒrouters,๎˜ƒetc.
Step 7: Supply power to the 802.3at PoE+ Switch.
A. Connect one end of the power cable to the 802.3at PoE+ Switch.
B. Connect the power plug of the power cable to a standard wall
outlet.
When๎˜ƒ the๎˜ƒ 802.3at๎˜ƒ PoE+๎˜ƒ Switch๎˜ƒ receives๎˜ƒ power,๎˜ƒ the๎˜ƒ power๎˜ƒ LED๎˜ƒ should๎˜ƒ
remain solid Green.
5.2 Installing the SFP Transceiver
The๎˜ƒ sections๎˜ƒ describe๎˜ƒ how๎˜ƒ to๎˜ƒ insert๎˜ƒ an๎˜ƒ SFP๎˜ƒ transceiver๎˜ƒ into๎˜ƒ an๎˜ƒ SFP๎˜ƒ slot๎˜ƒ
of the 802.3at PoE+ Switch.
The๎˜ƒSFP๎˜ƒtransceivers๎˜ƒare๎˜ƒhot-pluggable๎˜ƒand๎˜ƒhot-swappable.๎˜ƒYou๎˜ƒcan๎˜ƒplug๎˜ƒ
in๎˜ƒand๎˜ƒout๎˜ƒthe๎˜ƒtransceiver๎˜ƒto/from๎˜ƒany๎˜ƒSFP๎˜ƒport๎˜ƒwithout๎˜ƒhaving๎˜ƒ to๎˜ƒpower๎˜ƒ
down the 802.3at PoE+ Switch, as the Figure 5-3 shows.
PWR
1
2
3
4
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
1 2 34567 8 9 10 11 12 13 14 1516 17 18 19 20 21
22 2324 26
25
28
27 28
Standard
VLAN
Extend
10/100
1000
LNK/ACT
LNK/ACT
PoE-in
-Use
1000
X SFP
MGB-Series SFP Transceiver
LC Fiber Cable
1
2
Figure 5-3: Plugging In the SFP Transceiver
๏ฎ Approved PLANET SFP Transceivers
PLANET 802.3at PoE+ Switch supports both single mode and multi-
mode๎˜ƒ SFP๎˜ƒ trans-ceivers.๎˜ƒ The๎˜ƒ website๎˜ƒ link๎˜ƒ of๎˜ƒ approved๎˜ƒ PLANET๎˜ƒ SFP๎˜ƒ
transceivers๎˜ƒis๎˜ƒshown๎˜ƒbelow:
https://www.planet.com.tw/en/product/mgb-series-transceiver
Note
It is recommended to use PLANET SFP on the 802.3at
PoE+๎˜ƒSwitch.๎˜ƒ If๎˜ƒ you๎˜ƒ insert๎˜ƒ an๎˜ƒ SFP๎˜ƒ transceiver๎˜ƒthat๎˜ƒ is๎˜ƒ not๎˜ƒ
supported, the 802.3at PoE+ Switch will not recognize it.
1. Before we connect the 802.3at PoE+ Switch to the other network
device,๎˜ƒ we๎˜ƒ have๎˜ƒto๎˜ƒ make๎˜ƒ sure๎˜ƒ both๎˜ƒ sides๎˜ƒ of๎˜ƒ the๎˜ƒ SFP๎˜ƒ transceivers๎˜ƒare๎˜ƒ
with the same media type, for example, 1000BASE-SX to 1000BASE-
SX; 1000BASE-LX to 1000BASE-LX.
2.๎˜ƒCheck๎˜ƒ whether๎˜ƒthe๎˜ƒ๎šฟber-optic๎˜ƒ cable๎˜ƒtype๎˜ƒmatches๎˜ƒ with๎˜ƒthe๎˜ƒ SFP๎˜ƒtrans-
ceiver๎˜ƒrequirement.
๏ƒ˜๎˜ƒTo๎˜ƒ connect๎˜ƒ to๎˜ƒ 1000BASE-SX๎˜ƒ SFP๎˜ƒ transceiver,๎˜ƒ please๎˜ƒ use๎˜ƒ the๎˜ƒ
multi-mode๎˜ƒ ๎šฟber๎˜ƒ cable๎˜ƒ with๎˜ƒ one๎˜ƒ side๎˜ƒ being๎˜ƒ the๎˜ƒ male๎˜ƒ duplex๎˜ƒ LC๎˜ƒ
connector type.
๏ƒ˜๎˜ƒTo๎˜ƒ connect๎˜ƒ to๎˜ƒ 1000BASE-LX๎˜ƒ SFP๎˜ƒ transceiver,๎˜ƒ please๎˜ƒ use๎˜ƒ the๎˜ƒ
single-mode๎˜ƒ ๎šฟber๎˜ƒ cable๎˜ƒ with๎˜ƒ one๎˜ƒ side๎˜ƒ being๎˜ƒ the๎˜ƒ male๎˜ƒ duplex๎˜ƒ LC๎˜ƒ
connector type.
Customer Support
Thank you for purchasing PLANET products. You can browse our online
FAQ๎˜ƒ resource๎˜ƒ on๎˜ƒ PLANET๎˜ƒ Web๎˜ƒ site๎˜ƒ ๎šฟrst๎˜ƒ to๎˜ƒ check๎˜ƒ if๎˜ƒ it๎˜ƒ could๎˜ƒ solve๎˜ƒ your๎˜ƒ
issue. If you need more support information, please contact PLANET
support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq
Support team mail address
support@planet.com.tw
Copyright ยฉ PLANET Technology Corp. 2021
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.

Produktspezifikationen

Marke: Planet
Kategorie: Schalten
Modell: GSW-2824P

Brauchst du Hilfe?

Wenn Sie Hilfe mit Planet GSW-2824P benรถtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Schalten Planet

Planet

Planet GSD-1121XP Bedienungsanleitung

19 September 2024
Planet

Planet FSD-504HP Bedienungsanleitung

14 September 2024
Planet

Planet IGTP-805AT Bedienungsanleitung

3 September 2024
Planet

Planet IPM-16230 Bedienungsanleitung

3 September 2024
Planet

Planet FSD-804P Bedienungsanleitung

3 September 2024
Planet

Planet SW-504 Bedienungsanleitung

16 August 2024
Planet

Planet ISW-804PT-M12 Bedienungsanleitung

12 August 2024
Planet

Planet FGSD-2621P Bedienungsanleitung

3 August 2024
Planet

Planet IGS-620TF Bedienungsanleitung

28 Juli 2024
Planet

Planet GSW-1820VHP Bedienungsanleitung

28 Juli 2024

Bedienungsanleitung Schalten

Neueste Bedienungsanleitung fรผr -Kategorien-

Netgear

Netgear GS110TPP Bedienungsanleitung

15 Oktober 2024
Hager

Hager K7F10M1W Bedienungsanleitung

12 Oktober 2024
Tripp Lite

Tripp Lite B005-DPUA4 Bedienungsanleitung

11 Oktober 2024
Lancom

Lancom CS-8132F Bedienungsanleitung

8 Oktober 2024
Lancom

Lancom YS-7154CF Bedienungsanleitung

8 Oktober 2024
Perel

Perel E305W3-G Bedienungsanleitung

5 Oktober 2024
TP-Link

TP-Link Festa FS328G Bedienungsanleitung

4 Oktober 2024
Totolink

Totolink SW24DM Bedienungsanleitung

4 Oktober 2024
Black Box

Black Box ACX300-R Bedienungsanleitung

4 Oktober 2024
Totolink

Totolink SW1008P Bedienungsanleitung

3 Oktober 2024