Planet FGSD-2621P Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Planet FGSD-2621P (4 Seiten) in der Kategorie Schalten. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET 16-/24-Port 10/100TX 802.3at PoE
+ 2-Port 10/100/1000T + 1-Port shared 1000X SFP Desktop Switch,
FGSD-1821P or FGSD-2621P. “802.3at PoE+ Switch” mentioned in this
Guide refers to the FGSD-1821P or FGSD-2621P
Open the box of the 802.3at PoE+ Switch and carefully unpack it. The
box should contain the following items
The 802.3at PoE+ Switch x 1 User’s Manual x 1 Power Cord x 1
SFP Dust Cap
x 1 Screws x 8 Rack-mounting
Brackets x 2 Rubber Feet x 4
If any of these pieces are missing or damaged, please contact your
dealer immediately; if possible, retain the carton including the original
packing material, and use them again to repack the product in case
there is a need to return it to us for repair.
Per 10/100BASE-TX Port
LED Color Function
10/100
LNK/ACT Green
Lights to indicate the link through that
port is successfully established.
Blinks to indicate that the Switch is
actively sending or receiving data over
that port.
PoE in Use Amber Lights to indicate the port is providing
PoE DC in-line power.
Per 10/100/1000BASE-T Port
LED Color Function
10/100/1000
LNK/ACT Green
Lights to indicate the link through that
port is successfully established.
Blinks to indicate that the Switch is
actively sending or receiving data over
that port.
1000BASE-X SFP Port
LED Color Function
1000
LNK/ACT Green
Lights to indicate the link through that port
is successfully established at 1000Mbps.
Blinks to indicate that the Switch is actively
sending or receiving data over that port.
3 Hardware Installation
3.1 Rack Mounting
To install the 802.3at PoE+ Switch in a 19-inch standard rack, follow the
instructions described below.
Step 1: Place your 802.3at PoE+ Switch on a hard at surface, with
the front panel positioned towards your front side.
Step 2: Attach a rack-mount bracket to each side of the 802.3at PoE+
Switch with supplied screws attached to the package. Figure
3-1 shows how to attach brackets to one side of the 802.3at
PoE+ Switch.
17
1000X SFP
LNK
PoE-in-Use
ACT
Standard
VLAN
Extend
PWR
PoE Max
2 6
4 8 10 14
12 16
1 5
3 7 9 13
11 15
18
17
2
1
4
3
6
5
8
7
10
9
12
11
14
13
16
15
18
17
Figure 3-1: Attaching the Brackets to the 802.3at PoE+ Switch.
Caution
You must use the screws supplied with the mounting
brackets. Damage caused to the parts by using incorrect
screws would invalidate the warranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the
opposite side.
Standard Mode (default)
Power
PoE IP Camera
PoE
100 meters (328 feet)
PoE
100BASE-TX UTP with PoE
FGSD-1821P
Standard
VLAN
Extend
VLAN Isolation Mode
NVR
PC
Ports 1 to 16
Access Denied
PoE
PoE
PoE
PoE
100BASE-TX UTP with PoE
FGSD-1821P
IP Camera
IP Camera
IP Camera
Ports 17~18 and SFP Port 17
to Ports 1~16 Access Permitted
1000BASE-T UTP
Standard
VLAN
Extend
Extend Mode
Ports 1 to 8
Power
250 meters (820 feet)
PoE
PoE
10BASE-T UTP with PoE
PoE IP Camera
FGSD-1821P
Standard
VLAN
Extend
2. Hardware Introduction
2.1 Front Panel
The front panel of the 802.3at PoE+ Switch consists of 16/24 auto-
sensing 10/100BASE-TX RJ45 ports, 2 auto-sensing 10/100/1000BASE-T
RJ45 ports and 1 1000BASE-X SFP port. The LED Indicators are also
located on the front panel of the 802.3at PoE+ Switch.
17
1000X SFP
LNK
PoE-in-Use
ACT Standard
VLA N
Ex tend
PWR
PoE Ma x
2 64 8 10 1412 16
1 53 7 9 1311 15
18
17
2
1
4
3
6
5
8
7
10
9
12
11
14
13
16
15
18
17
Figure 2-1: FGSD-1821P Switch Front Panel
1000X SFP
25
1 2 3 4 5 6 7 8 9 10 12 13 14 1 5 16 17 18 19 2 0 21 22 23 2411
26
Standa rd
VLA N
Ex tend
LNK ACT
4 128 16 20 24
3 117 15 19 23
2 106 14 18
PoE Max
22
1 95 13 17 PWR21
26
25
PoE -
in-Use 26
Figure 2-2: FGSD-2621P Switch Front Panel
2.2 LED Indicators
System
LED Color Function
PWR Green Lights to indicate the Switch has power.
PoE
(max.) Green
O to indicate the PoE power is less than 80%
of total power.
Lights to indicate the PoE power is above
80%.
2.3 Multiple Functions of DIP Switch
The front panel of the 802.3at PoE+ Switch provides one DIP switch for
Standard VLAN Extend, or mode selection. The detailed descriptions
are shown in the following table.
DIP Switch Mode Function
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch
operate as a and all PoE+ general switch
ports operate at 10/100Mbps auto-negotiation.
All ports can communicate with one another.
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch
operate as a switch and VLAN isolation
For FGSD-1821P:
1. Ports 1 to 16 will isolate respectively.
2. Ports 1 to 16 can only communicate with
ports 17~18 (uplink ports) and SFP port 17.
For FGSD-2621P:
1. Ports 1 to 24 will isolate respectively.
2. Ports 1 to 24 can only communicate with
ports 25~26 (uplink ports) and SFP port 26
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch
operate as a switch and Long Reach PoE
1. Ports 1 to 8 support farthest transmission
distance of up to 250 meters
2. Ports 1 to 8 have a data rate of 10Mbps
3. All ports can communicate with one
another.
Note
Please select a DIP switch mode before powering on the
802.3at PoE+ Switch.
2.4 Rear Panel
The rear panel of the 802.3at PoE+ Switch indicates an AC power
socket, which accepts input power from 100 to 240V AC, 50-60Hz, 5A.
50/60Hz
100-240V , 5A max.
Figure 2-3: Switch Rear Panel
AC Power Receptacle
Power
Notice
The device is a power-required device, which means
it will not work till it is powered. If your networks
should be active all the time, please consider using UPS
(uninterrupted power supply) for your device. It will
prevent you from network data loss or network downtime.
Power
Notice
In some areas, installing a surge suppression device may
also help to protect your 802.3at PoE+ Switch from being
damaged by unregulated surge or current to the 802.3at
PoE+ Switch or the power adapter.
Step 5: After the brackets are attached to the 802.3at PoE+ Switch,
use suitable screws to securely attach the brackets to the
rack, as shown in Figure 3-2.
17
1000X SF P
LNK
PoE-in-Us e
ACT
Standa r d
VLAN
Exten d
PWR
PoE Max
2 6
4 8 10 14
12 16
1 5
3 7 9 13
11 15
18
17
2
1
4
3
6
5
8
7
10
9
12
11
14
13
16
15
18
17
Figure 3-2: Mounting the 802.3at PoE+ Switch in a Rack
Step 6: Connect your 802.3at PoE+ Switch to 802.3af/802.3at
complied PDs and other network devices.
A. Connect one end of a standard network cable to the
10/100/1000BASE-T RJ45 ports on the front panel of the 802.3at
PoE+ Switch.
B. Connect the other end of the cable to the network devices such as
printer servers, workstations or routers, etc.
Step 7: Supply power to the 802.3at PoE+ Switch.
A. Connect one end of the power cable to the 802.3at PoE+ Switch.
B. Connect the power plug of the power cable to a standard wall
outlet.
When the 802.3at PoE+ Switch receives power, the power LED should
remain solid Green.
- 9 -
- 10 -
- 11 -
- 12 - - 13 - - 14 -
3.2 Installing the SFP Transceiver
The sections describe how to insert an SFP transceiver into an SFP port
of the 802.3at PoE+ Switch.
The SFP transceivers are hot-pluggable and hot-swappable. You can plug
in and out the transceiver to/from any SFP port without having to power
down the 802.3at PoE+ Switch, as Figure 3-3 shows.
17
1000X SFP
LNK
PoE-in-Use
ACT
Standard
VLAN
Extend
PWR
PoE Max
2 6
4 8 10 14
12 16
1 5
3 7 9 13
11 15
18
17
2
1
4
3
6
5
8
7
10
9
12
11
14
13
16 18
17
MGB-Series SFP Transceiver
LC Fiber Cable
1
2
Figure 3-3: Plugging In the SFP Transceiver
Approved PLANET SFP Transceivers
PLANET 802.3at PoE+ Switch supports both single mode and multi-mode
SFP transceivers. The website link of ap-proved PLANET SFP transceivers
is shown below:
https://www.planet.com.tw/en/product/mgb-series-transceiver
Note
It is recommended to use PLANET SFP on the 802.3at
PoE+ Switch. If you insert an SFP transceiver that is not
supported, the 802.3at PoE+ Switch will not recognize it.
4.ProductSpecications
Model FGSD-1821P FGSD-2621P
HardwareSpecications
10/100BASE-TX
RJ45 Port with
802.3af/802.3at PoE+
Inject
16 24
10/100/1000BASE-T
RJ45 Port
2 (Port-17 shared with
SFP port)
2 (Port-26 shared
with SFP port)
1000BASE-X SFP/
mini-GBIC Slot
1
(shared with Port-17)
1
(shared with Port-26)
DIP Switch
Selectable operation mode
Standard
VLAN
Extend
Dimensions
(W x D x H) 280 x 180 x 44 mm (1U height)
Enclosure Metal
Weight 1800g 1870g
Power Requirements 100~240V AC, 50/60Hz, 5A max.
Power Consumption/
Dissipation
Max. 207 watts/706
BTU
Max. 217 watts/740
BTU
Thermal Fan 1
ESD Protection Contact discharge of ±6KV DC,
Air discharge of ±8KV DC
Surge Protection DierentialMode±4KV,CommonMode±6KV
1. Before we connect the 802.3at PoE+ Switch to the other network
device, we have to make sure both sides of the SFP transceivers are
with the same media type, for example, 1000BASE-SX to 1000BASE-
SX; 1000BASE-LX to 1000BASE-LX.
2. Checkwhether the ber-opticcable type matcheswith the SFPtrans-
ceiver requirement.
To connect to SFP transceiver, please use the 1000BASE-SX
multi-mode ber cable with one side being the male duplex LC
connector type.
To connect to SFP transceiver, please use the 1000BASE-LX
single-mode ber cable with one side being the male duplex LC
connector type.
Installation Desktop or rack-mount installation
LED
System
Power (Green)
PoE Max. (Green)
10/100/1000T RJ45 Interfaces
10/100/1000 LNK/ACT (Green)
PoE-in-Use (Amber)
1000X SFP Interfaces
1000 LNK/ACT (Green)
Switching
Switch Architecture Store-and-Forward
Switch Fabric 7.2Gbps/non-blocking 8.8Gbps/non-blocking
Switch
Throughput@64bytes 5.36Mpps 6.5Mpps
MAC Address Table 16K entries
Jumbo Frame 16K bytes
Flow Control IEEE 802.3x pause frame for full duplex;
back pressure for half duplex
Power over Ethernet
PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE
PoE Injector Ports 16 24
PoE Power Supply
Type End-span: 1/2 (+), 3/6 (-)
PoE Power Output Per port 55V DC, 600mA. max. 32 watts
PoE Power Budget 185 watts
Number of PDs,
7 watts 16 24
Number of PDs,
15.4 watts 12 12
Number of PDs,
30 watts 6 6
Standards Conformance
Regulatory
Compliance FCC Part 15 Class A, CE
Standards Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE802.3x owcontrolandbackpressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE802.3azEnergy-EcientEthernet
Environment
Operating
Temperature: 0 ~ 50 degrees C
Relative Humidity: 5 ~ 95%
(non-condensing)
Storage
Temperature: -10 ~ 70 degrees C
Relative Humidity: 5 ~ 95%
(non-condensing)
5. Customer Support
Thank you for purchasing PLANET products. You can browse our online
FAQ resource on PLANET Web site rst to check if it could solve your
issue. If you need more support information, please contact PLANET
support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq
Support team mail address
support@planet.com.tw
Copyright © PLANET Technology Corp. 2022
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
Produktspezifikationen
| Marke: | Planet |
| Kategorie: | Schalten |
| Modell: | FGSD-2621P |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Planet FGSD-2621P benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schalten Planet
19 September 2024
14 September 2024
3 September 2024
3 September 2024
3 September 2024
16 August 2024
12 August 2024
3 August 2024
28 Juli 2024
28 Juli 2024
Bedienungsanleitung Schalten
- Schalten Asus
- Schalten Belkin
- Schalten Hama
- Schalten HP
- Schalten LogiLink
- Schalten Manhattan
- Schalten Nedis
- Schalten Philips
- Schalten SilverCrest
- Schalten Panasonic
- Schalten Brennenstuhl
- Schalten Clas Ohlson
- Schalten Cotech
- Schalten Profile
- Schalten ZyXEL
- Schalten Bosch
- Schalten Yamaha
- Schalten Powerfix
- Schalten CSL
- Schalten Eminent
- Schalten Linksys
- Schalten Netgear
- Schalten König
- Schalten PCE
- Schalten Renkforce
- Schalten Trotec
- Schalten Schneider
- Schalten Rex
- Schalten Kaiser
- Schalten Vivanco
- Schalten Abus
- Schalten Elro
- Schalten Smartwares
- Schalten Tesla
- Schalten Perel
- Schalten Nexa
- Schalten Tork
- Schalten GEV
- Schalten Goobay
- Schalten Lindy
- Schalten Tripp Lite
- Schalten Ansmann
- Schalten Mercusys
- Schalten Marmitek
- Schalten Honeywell
- Schalten TRENDnet
- Schalten TP-Link
- Schalten Kathrein
- Schalten Flamingo
- Schalten Alcatel
- Schalten Tiptel
- Schalten Black Box
- Schalten Alpine
- Schalten Techly
- Schalten Ebode
- Schalten Theben
- Schalten Vacmaster
- Schalten GAO
- Schalten Hager
- Schalten Behringer
- Schalten Omnitronic
- Schalten Monoprice
- Schalten Ecler
- Schalten Monacor
- Schalten Huawei
- Schalten JUNG
- Schalten Victron Energy
- Schalten Ei Electronics
- Schalten Edimax
- Schalten Totolink
- Schalten D-Link
- Schalten Sylvania
- Schalten Audiovox
- Schalten B-Tech
- Schalten QNAP
- Schalten SPC
- Schalten Speaka
- Schalten Digitus
- Schalten Sygonix
- Schalten DataVideo
- Schalten Lancom
- Schalten LevelOne
- Schalten Merten
- Schalten APC
- Schalten Eberle
- Schalten Cisco
- Schalten Delta Dore
- Schalten Grässlin
- Schalten Tenda
- Schalten CyberPower
- Schalten Boss
- Schalten IFM
- Schalten Intertechno
- Schalten Elation
- Schalten Ubiquiti Networks
- Schalten Kramer
- Schalten Aeon Labs
- Schalten Intellinet
- Schalten Eaton
- Schalten AV:link
- Schalten Hikvision
- Schalten Vemer
- Schalten PreSonus
- Schalten EnGenius
- Schalten Finder
- Schalten Mikrotik
- Schalten Shimano
- Schalten Homematic IP
- Schalten Berker
- Schalten Dormakaba
- Schalten Emerson
- Schalten Generac
- Schalten Intermatic
- Schalten KlikaanKlikuit
- Schalten Mercury
- Schalten Paladin
- Schalten Provision ISR
- Schalten Robbe
- Schalten SEC24
- Schalten Steren
- Schalten Suevia
- Schalten AMX
- Schalten Triax
- Schalten WHALE
- Schalten Vimar
- Schalten Cudy
- Schalten Siig
- Schalten Electro Harmonix
- Schalten RGBlink
- Schalten Iogear
- Schalten StarTech.com
- Schalten Smart-AVI
- Schalten Dahua Technology
- Schalten PAC
- Schalten Gefen
- Schalten Avocent
- Schalten Legrand
- Schalten Atlantis Land
- Schalten CYP
- Schalten H-Tronic
- Schalten ATen
- Schalten Axing
- Schalten KanexPro
- Schalten SmartAVI
- Schalten Advantech
- Schalten Kraus & Naimer
- Schalten Chacon
- Schalten Juniper
- Schalten Fibaro
- Schalten Phoenix Contact
- Schalten Audac
- Schalten OSD Audio
- Schalten Wentronic
- Schalten SunBriteTV
- Schalten BZBGear
- Schalten Crestron
- Schalten Kemo
- Schalten ORNO
- Schalten Extron
- Schalten Atlona
- Schalten Equip
- Schalten Heitronic
- Schalten Hamlet
- Schalten STI
- Schalten Matrox
- Schalten Blustream
- Schalten Vivolink
- Schalten Mach Power
- Schalten Ernitec
- Schalten Cambium Networks
- Schalten ConnectPro
- Schalten Micro Connect
- Schalten Intelix
- Schalten ICasa
- Schalten Maclean Energy
- Schalten Cooking Performance Group
- Schalten Flic
- Schalten Liberty
- Schalten Noark
- Schalten 2USB
- Schalten KVM-TEC
- Schalten Setti+
- Schalten PureLink
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
12 Oktober 2024
11 Oktober 2024
8 Oktober 2024
8 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
4 Oktober 2024
3 Oktober 2024