Planet GSD-504 Bedienungsanleitung

Planet Schalten GSD-504

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Planet GSD-504 (2 Seiten) in der Kategorie Schalten. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
Power
Notice
1. The device is a power-required device,
meaning it will not work till it is powered.
If your networks should be active all the
time, please consider using UPS (Uninter-
rupted Power Supply) for your device. It
will prevent you from network data loss
or network downtime.
2. In some areas, installing a surge sup-
pression device may also help to protect
your Switch from being damaged by un-
regulated surge or current to the Switch
or the power adapter.
1. Package Contents
Check the contents of your package for the following
parts:
Gigabit Ethernet
Switch x 1
5V DC
1A Power
Adapter x 1
User’s
Manual x 1
If any of these are missing or damaged, please contact
your dealer immediately; if possible, retain the carton
including the original packing material, and use them
again to repack the product in case there is a need to
return it to us for repair.
Hardware
Made from plastic and desktop size and wall-mount
design
LED indicators for system power, per port Link / Act
5V DC, 1A external power adapter
FCC, CE Class B compliant
4. LED Indicators
Figures 4-1 and 4-2 show the front panel of GSD-504
and GSD-804, respectively.
Figure 4-1: GSD-504 LED Panel
Figure 4-2: GSD-804 LED Panel
LED Color Function
PWR Green
Light Indicates that the Switch is
powered ON.
OFF Indicates that the Switch is
powered OFF.
Link/ACT Green
Light
Indicates the link
through that port is
successfully established at
10/100/1000Mbps.
Blink
Indicates the Switch is
actively sending or receiving
data over that port.
2. Product Features
RJ-45 Interface
5/8 10/100/1000Mbps Gigabit Ethernet ports
Complies with IEEE 802.3, 10Base-T, IEEE 802.3u
100Base-TX, IEEE 802.3ab 1000Base-T
Supports Auto MDI/MDI-X function
Switching
Hardware based 10/100Mbps, Half / Full Duplex and
1000Mbps Full Duplex mode, Flow Control and Auto-
negotiation
Features Store-and-Forward mode with wire-speed
ltering and forwarding rates
IEEE 802.3x ow control for Full Duplex operation
and backpressure for Half Duplex operation
Integrated address look-up engine, supporting 2K/8K
absolute MAC addresses (GSD-504 / GSD-804)
9K Jumbo packet size
Power Saving ability for Green networking
Automatic Address Learning and Address Aging
Supports CSMA/CD protocol
3. Switch Top Panel
Figures 3-1 and 3-2 show the top panel of GSD-504
and GSD-804, respectively.
Figure 3-1: GSD-504 Top Panel
Figure 3-2: GSD-804 Top Panel
6. Installing the Switch
This part describes how to install your Gigabit Ethernet
Switch and make connections to it. Please read the
following topics and perform the procedures in the order
being presented.
Note
This Switch does not need software configu-
ration.
Desktop Installation
To install the Switch on desktop, simply follow the
following steps:
Step 1: Place the Switch on the desk near a power
source.
Step 2: Keep some ventilation space between the
Switch and the surrounding objects.
Note
When choosing a location, please keep in
mind the environmental restrictions dis-
cussed in Chapter 7 under Product Specifi-
cations.
5. Switch Rear Panel
Figures 5-1 and 5-2 show the rear panel of GSD-504
and GSD-804, respectively.
Figure 5-1: GSD-504 Rear Panel
Figure 5-2: GSD-804 Rear Panel
- 9 -
- 10 - - 12 -
- 11 -
Step 3: Connect your Switch to network devices.
A. Connect one end of a standard network
cable to the 10/100/1000 RJ-45 ports on
the rear panel of the Switch.
B. Connect the other end of the cable to the
network devices such as printer servers,
workstations or routers, etc.
Step 4: Supply power to the Switch.
A. Connect one end of the power cable to the
Switch.
B. Connect the 5V DC power adapter to a
standard wall outlet.
When the Switch receives power, the Power LED should
remain solid Green.
PC/Laptop
xDSL/Cable RouterInternet Power Adapter
RJ-45
RJ-45
Power
0
0110 1
010
Throughput
(packet per second) 7.44Mpps 11.9Mpps
Jumbo packet size 9K
Standards Conformance
Standards Compliance
IEEE 802.3 (Ethernet)
IEEE 802.3u
(Fast Ethernet)
IEEE 802.3ab
(Gigabit Ethernet)
IEEE 802.3x
(Full-duplex Flow Control)
IEEE 802.3az Energy
Efcient Ethernet (EEE)
Regulation Compliance FCC Part 15 Class B, CE
Environments
Temperature Operating: 0~50 degrees C
Storage: -10~70 degrees C
Humidity
Operating: 5% to 95%,
Storage: 5% to 95%
(non-condensing)
7. Product Specications
Product GSD-504 GSD-804
Hardware Specications
Hardware Version 7
10/100/1000Base-T Ports 5 Auto MDI/
MDIX ports
8 Auto MDI/
MDIX ports
LED Display One for power, One for Link
/ ACT Per Port
Enclosure Plastic
Dimensions (mm) 168 x 100 x 29mm
Weight (g) 138g 175g
Power Requirements
(External power adapter) 5V DC, 1A
Power Consumption
(100M Full operation)
3.3 watts /
11 BTU
4 watts / 13
BTU
Switch Specications
Switch Processing
Scheme Store-and-Forward
Address Table 2K 8K
Flow Control
Back pressure Half Duplex,
IEEE 802.3x Pause Frame
Full Duplex
Switch Fabric 10Gbps 16Gbps
8. Cu tomer Supports
Thank you for purchasing PLANET products. You can
browse our online FAQ resource on PLANET Website rst
to check if it could solve you issue. If you need more
support information, please contact PLANET switch
support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address :
support_switch@planet.com.tw
Copyright © PLANET Technology Corp. 2014.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
EC Declaration of Conformity
For the following equipment:
*Type of Product: 5 / 8 -Port 10/100/1000Mbps Gigabit Ethernet Switch , Plastic
*Model Number: GSD-504, GSD-804
* Produced by:
Manufacturer‘s Name : Planet Technology Corp.
Manufacturer‘s Address: 10F., No.96, Minquan Rd., Xindian Dist.,
New Taipei City 231, Taiwan (R.O.C.).
is herewith confirmed to comply with the requirements set out in the Council Directive on the
Approximation of the Laws of the Member States relating to Electromagnetic Compatibility
Directive on (2004/108/EC).
For the evaluation regarding the EMC, the following standards were applied:
EN 55022 (2010+AC: 2011)
EN 61000-3-2 (2006+A1:2009+A2:2009)
EN 61000-3-3 (2008)
EN 55024 (2010)
Responsible for marking this declaration if the:
Manufacturer Authorized representative established within the EU
Authorized representative established within the EU (if applicable):
Company Name: Planet Technology Corp.
Company Address: 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
Person responsible for making this declaration
Name, Surname Kent Kang
Position / Title : Product Manager
Taiwan 30, April, 2014
Place Date Legal Signature
PLANET TECHNOLOGY CORPORATION
e-mail: sales@planet.com.tw http://www.planet.com.tw
10F., No.96, Minquan Rd., Xindian Dist., New Taipei City, Taiwan, R.O.C. Tel:886-2-2219-9518 Fax:886-2-2219-9528


Produktspezifikationen

Marke: Planet
Kategorie: Schalten
Modell: GSD-504

Brauchst du Hilfe?

Wenn Sie Hilfe mit Planet GSD-504 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schalten Planet

Bedienungsanleitung Schalten

Neueste Bedienungsanleitung für -Kategorien-