Pinnacle AudioBuddy Bedienungsanleitung

Pinnacle Empfänger AudioBuddy

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pinnacle AudioBuddy (8 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
Users Manual
Dual Mic Preamp | Direct Box
Audio Buddy
Introduction
This product complies with European CE requirements.
Thank you for your purchase of the M-Audio AudioBuddy™, mic
preamp and direct box. M-Audio has designed and manufactured
several different audio mixers including MiniMixer, MicroMixer 18,
MultiMixer 6, MultiMixer 10 and miXim 10. All of these mixers have
two things in common: 1.) they are exceedingly quiet -- quieter than
99% of all mixers on the market and 2.) they are uniquely configured to
meet the specific needs of the MIDI and multimedia musician.
The Audio Buddy, once again, fits these two criteria. First, it is a very
quiet mic preamp. This is because the unit’s simple and efficient
design and ultra compact layout eliminates much of the noise. The
unit also has a higher than usual voltage “rail” across its internal op-
amps. This means that you get more “punch” and much more dynamic
audio output.
Secondly, the Audio Buddy (when coupled with its ultra quiet
performance) is the perfect audio “gateway” for recording the two
most significant, non-line level instruments in the studio: microphones
and electric guitars.
The Audio Buddy has two completely independent preamplifier
sections. Each of these sections has: 1.) a balanced XLR input on the
back of the unit, 2.) a high impedance 1/4” unbalanced input (T S) on
the front of the unit, 3.) signal (present) and clipping LEDs, 4.) a gain
control and 5.) a 1/4” dual purpose output on the back of the unit that
provides either an unbalanced out (when a mono plug is used) or a
balanced out (when a stereo plug is used).
IMPORTANT: Whenever one of the front panel high impedance
inputs is used, the associated back panel XLR is disabled.
The Audio Buddy also has built in phantom power which can be
switched on or off for both channels. When the rear panel phantom
power switch is in, phantom power to both channels is turned on and
the front Phan(tom) power LED will light.
IM PORTANT: Since the phantom power switch turns phantom
power on or off for both channels, there is no way to turn phantom
power on for one channel and off for the other channel. If you are
using the high impedance inputs the phantom power switch has no
effect.
Front and Real Panels
When reading the following description of front and rear panel harware
features, it may be helpful to refer to the adjacent diagram.
8. Main Power Indicator LE
to the Audio Buddy and wh

Produktspezifikationen

Marke: Pinnacle
Kategorie: Empfänger
Modell: AudioBuddy

Brauchst du Hilfe?

Wenn Sie Hilfe mit Pinnacle AudioBuddy benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Pinnacle

Pinnacle

Pinnacle DMP3 DualMicrophon PreAmp Bedienungsanleitung

10 August 2024
Pinnacle

Pinnacle AudioBuddy Bedienungsanleitung

9 August 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024