Philips AX3306 Bedienungsanleitung

Philips Nicht kategorisiert AX3306

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Philips AX3306 (5 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 54 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

AudioAudio

AX3300

AX3301

AX3302

AX3303

AX3304

AX3305

AX3306

Portable CD Player

CLASS 1

LASER PRODUCT

Meet Philips at the Internet

http://www.philips.com

Portable CD Player

English

3140 115 31423

Printed in China

re pea t al l

DBB

rep eat all

vol

DBB

rep ea t al l

vol

DBB

HOLD OFF➟

PLAY 2;

6VOL

!!!

1 .

2 .

POWER SAVE

ESP ON

PO WER SAV E

ESP ON

repeat all

vol

DBB

QUICK START

Handling instructions

• Recharging already charged or half-charged batteries will shorten their

lifetime. We therefore recommend that you let the rechargeable ECO-PLUS

NiMH battery run till it is completely empty before you recharge it.

• To avoid a short circuit, do not let the battery touch any metal object.

• If the battery becomes empty soon after recharging, then either its contacts

are dirty or it has reached the end of its lifetime.

Mains adapter (supplied or optionally available)

Use only the AY 3170 adapter (4.5 V / 300 mA direct

current, positive pole to the center pin). Any other product

may damage the player.

1Make sure the local voltage corresponds to the power

adapter’s voltage.

2Connect the power adapter to the 4.5V DC socket of

the player and to the wall socket.

Note: Always disconnect the adapter when you are not using it.

Environmental information

• All redundant packing material has been omitted. We have done our utmost to

make the packaging easily separable into two mono materials: cardboard (box)

and polyethylene (bags, protective foam sheet).

• Your set consists of materials which can be recycled if disassembled by a

specialized company. Please observe the local regulations regarding the

disposal of packing materials, exhausted batteries and old equipment.

English CONTROLS / POWER SUPPLY

ontrols ( see figure

)

1LINE OUT/p........3.5 mm headphone socket, socket to connect the player to

another audio input of an additional appliance

2∞.......................skips and searches CD tracks backwards

39.........................stops CD play, clears a program or switches the player off

4§.......................skips and searches CD tracks forwards

52; ......................switches the player on, starts or pauses CD play

6PROG...................programs tracks and reviews the program

7MODE .................selects the different playing possibilities: shuffle,

shuffle repeat all, , repeat repeat all and SCAN

8............................display

9DBB.....................switches the bass enhancement on and off. This button also

switches acoustic feedback (the beep) on/off when it is

pressed for more than 2 seconds

0VOL −

−

−/

+..............adjusts the volume

!4.5V DC...............socket for external power supply

@OPEN 2..............opens the CD lid

#ESP ON /

POWER SAVE .......to select between the battery powersave mode and

E S Plectronic kip rotection (ESP). ESP ensures continuous

CD playback regardless of vibrations and shocks

$OFF......................switches RESUME and HOLD off

RESUME .............stores the last position of a CD track played

HOLD...................locks all buttons

%............................typeplate

^............................battery compartment

&............................AAA battery door

This set complies with the radio interference requirements of the

European Union.

POWER SUPPLY / GENERAL INFORMATION

Average playing time of batteries under normal conditions

Battery type ESP on Power Save

Alkaline AA 15 hours 20 hours

Alkaline AAA 7 hours 9 hours

Rechargeable ECO-PLUS NiMH battery 3 hours 5 hours

Batteries contain chemical substances, so they should be disposed

of properly.

ECO-PLUS NiMH battery information (for versions supplied with the

rechargeable ECO-PLUS NiMH battery AY 3363)

Recharging works only on players supplied with the rechargeable ECO-PLUS

NiMH battery AY 3363.

Recharging the ECO-PLUS NiMH battery on board

1Insert the rechargeable ECO-PLUS NiMH battery AY 3363.

2Connect the mains adapter to the 4.5V DC socket of

the player and then to the wall socket.

yis pulsing.

• Recharging stops after a maximum of 7 hours, or

when you start playback.

3When the battery is fully recharged, FULL appears

in the display.

Notes: – It is normal for the batteries to become warm

during recharging.

– If the batteries become too warm, recharging will be interrupted for

approximately 30 minutes .

– To ensure proper recharging on board, take care that contacts are clean.

– Use only the ECO-PLUS NiMH battery AY 3363.

Batteries (supplied or optionally available)

For convenience, this model is designed with 2 different detachable battery

doors. This allows you to operate the player using 2 choices of battery size.

You can use the following batteries with this CD-player:

• alkaline batteries type AAA (LR03, UM4) or preferablyAA (LR6, UM3)

Philips.

Notes:–

Old and new or different types of batteries should not be combined.

– Remove batteries if they are empty or if the player is not going to be used for

a long time.

Inserting AAA (LR03, UM4) or AY 3363 batteries

1Open the AAA battery door.

2Insert AAA batteries as shown onto the back of the

door.

3Replace the battery-loaded AAA door back onto the

set.

Inserting AA (LR6, UM3) batteries

To double playback time, insert AA batteries into the

battery compartment and use the marked batteryAA

door.

• Open the battery compartment and insert either 2

normal or alkaline batteries.

Battery indication

The approximate power level of your batteries is shown in the display.

Battery full

Battery two-thirds full

Battery one-third full

Battery dead or empty. When the batteries are

dead or empty, the symbol flashes, bAtt is

displayed, and the beep tone sounds repeatedly.

AA SIZE

LR6 / UM3

LR03/AAA /UM4

AAA (LR03, UM4)

AA (LR6, UM3)

GENERAL INFORMATION

CD player and CD handling

• Do not touch the lens Aof the CD player.

• Do not expose the unit, batteries or CDs to humidity,

rain, sand or excessive heat (caused by heating

equipment or direct sunlight).

• You can clean the CD player with a soft, slightly

dampened, lint-free cloth. Do not use any cleaning

agents as they may have a corrosive effect.

• To clean the CD, wipe it in a straight line from the

center toward the edge using a soft, lint-free cloth. A

cleaning agent may damage the disc! Never write on a CD or attach a sticker

to it.

• The lens may cloud over when the unit is moved suddenly from cold to warm

surroundings. Playing a CD is not possible then. Leave the CD player in a warm

environment until the moisture has evaporated.

• Active mobile phones in the vicinity of the CD player may cause malfunctions.

• Avoid dropping the unit as this may cause damage.

Headphones HE225/HE270

• Connect the supplied headphones to the LINE OUT/p

socket of the player.

Note: LINE OUT/pcan also be used for

connecting this set to your HiFi system.To adjust the

sound and volume, use the controls on the connected

audio equipment and on the CD player.

IMPORTANT!

Hearing safety: Do not play your headphones at a high volume. Hearing experts advise

that continuous use at high volume can permanently damage your hearing.

Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard

and it is illegal in many countries. Even if your headphones are an open-air type

designed to let you hear outside sounds, do not turn up the volume so high that you

cannot hear what is going on around you.

CD PLAY

Playing a CD

This CD-player can play all kinds of Audio Discs such

as CD-Recordables and CD-Rewritables. Do not try to

play a CD-ROM, CDi, VCD, DVD, MP3-CD or computer

CD.

1Push the OPEN 2slider to open the player.

2Insert an audio CD, printed side up, by pressing the

CD onto the hub.

3Close the player by pressing the lid down.

4Press 2; to switch the player on and start playback.

yThe current track number and elapsed playing

time are displayed.

• You can pause playback by pressing 2;.

yThe time at which playback was paused starts

flashing.

• You can continue playback by pressing 2; again.

5Press 9 to stop playback.

yThe total number of tracks and the total playing

time of the CD are displayed.

6Press 9 again to switch the player off.

• To remove the CD, hold it by its edge and press the

hub gently while lifting the CD.

Note: If there is no activity, the set will automatically

switch off after a while to save energy.

In-car use (connections supplied or optionally available)

Only use the AY 3545 or AY 3548 car voltage converter (4.5 V DC, positive pole to

the centre pin) and the AY 3501 car cassette adapter. Any other product may dam-

age the set.

1Put the set on a horizontal, vibration-free and

stable surface. Make sure it is in a safe place,

where the set is neither a danger nor an

obstacle to the driver and the passengers.

2Plug the voltage converter into the

cigarette lighter socket (only for 12 V car

battery, negative grounding), then connect

the wired end with 4.5V DC input socket on the

set.

3If necessary, clean the cigarette lighter socket to obtain a good electrical

contact.

4Turn down the volume and connect the cassette adapter plug to LINE OUT/p

on the set.

5Carefully insert the cassette adapter into the car radio’s cassette compartment.

6Make sure the cord does not hinder your driving.

7Decrease the volume on the set if necessary. Start playback on the set and

adjust the sound with the car radio controls.

•Always remove the voltage converter from the cigarette lighter socket

when the set is not in use.

Note: If your car radio has a LINE IN socket, it is better to use it for the

car radio connection instead of the adapter cassette. Connect the signal

lead to this LINE IN socket and to on the set.LINE OUT/p

4,5 V DC

12 V DC

repe at all

vol

DBB

Playback information

•If a CD-Recordable (CD-R) or a CD-Rewritable (CD-

RW) is not recorded properly, NF dISC is

displayed, indicating that the CD has not been

finalized. In that case, use FINALIZE on your CD

recorder to complete the recording.

•When playing a CD-Rewritable (CD-RW), please note

that it takes 3–15 seconds after pressing 2; for

sound reproduction to start.

•Playback will stop if you open the CD lid.

•While the CD is read, 1 -:- flashes in the display.

Volume and bass

Volume adjustment

• Adjust the volume by using VOL −

−

−/

+on the CD player

or the slider on the headphone cord.

Bass adjustment

• Press DBB to switch the bass enhancement on or

off

yis shown if the bass enhancement is

activated.

vol

Produktspezifikationen

Marke:	Philips
Kategorie:	Nicht kategorisiert
Modell:	AX3306
Display-Typ:	LCD
Schutzfunktion:	Hitzebeständig
Kopfhörer-Anschluss:	3,5 mm
Breite:	137.5 mm
Tiefe:	137.5 mm
Gewicht:	200 g
AC-Netzadapter:	Ja
Produktfarbe:	Blue, Silver
Höhe:	23.3 mm
Energiequelle:	Akku
Lautstärkeregler:	Digital
Verpackungsbreite:	162 mm
Verpackungstiefe:	147 mm
Verpackungshöhe:	92 mm
Display:	LCD
Betriebsanleitung:	Ja
Gerätetyp:	Tragbarer CD-Player
Verpackungsart:	D-Box
Rauschverhältnis (SNR):	85 dB
Frequenzbereich:	20 - 20000 Hz
Anzahl Produkte pro Versandkarton:	6 Stück(e)
Gewicht Versandkarton:	5000 g
Länge des Versandkartons:	174 mm
Breite des Versandkartons:	307 mm
Höhe des Versandkartons:	298 mm
Akku:	Ja
Verpackungsabmessungen (BxTxH):	162 x 147 x 92 mm
Wiedergabemodi:	Fast backward, Fast forward, Hold, Intro, Play, Program, Repeat, Shuffle
Integrierter Audio-D/A-Wandler (DAC):	Ja
Programmierbare Titel:	30
Abmessungen (B x T x H) (in Zoll):	137.5 x 137.5 x 23.3 "
CD-Wechsler:	Nein
Playback-Disk Typ:	CD, CD-R, CD-RW
Kopfhörer enthalten:	Ja
Menge in Koffer oder Umkarton:	6 Stück(e)
Abmessungen von Kiste/Umkarton (B x T x H):	307 x 174 x 298 mm
Line-Ausgang:	3.5 mm
Stoßsicherer Speicher:	45 s
Kontinuierliche Audiowiedergabezeit (CD):	20 h
Akustische Rückkopplung:	Ja
CD-Betriebszeit im Batteriebetrieb:	20 h