Philips 220PI Bedienungsanleitung

Philips Nicht kategorisiert 220PI

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Philips 220PI (97 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/97

e-Manual

Philips LCD Monitor Electronic User s Manual’

file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220B1-220P1/220B1-EDFU/5B.0V301.001/CD-Contents/lcd/manual/ENGLISH/220B1/INDEX.HTM [98-06-18 18:42]

Safety and Troubleshooting Information

Safety Precautions and

Maintenance

 FAQs

 Troubleshooting

 Regulatory Information

Safety and Troubleshooting Information

Safety precautions and maintenance

WARNING: Use of controls, adjustments or procedures other than

those specified in this documentation may result in exposure to shock,

electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor:

Operation:

● Keep the monitor out of direct sunlight and away from stoves or any other heat source.

● Remove any object that could fall into ventilation holes or prevent proper cooling of the

monitor s electronics. 

● Do not block the ventilation holes on the cabinet.

● When positioning the monitor, make sure the power plug and outlet are easily accessible.

● If turning off the monitor by detaching the power cable or DC power cord, wait for 6

seconds before attaching the power cable or DC power cord for normal operation.

● Please use approved power cord provided by Philips all the time. If your power cord is

missing, please contact with your local service center. (Please refer to Customer Care

Consumer Information Center)

● Do not subject the LCD monitor to severe vibration or high impact conditions during

operation.

● Do not knock or drop the monitor during operation or transportation.

Maintenance:

● To protect your display from possible damage, do not put excessive pressure on the LCD

panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by

placing your hand or fingers on the LCD panel.

● Unplug the monitor if you are not going to use it for an extensive period of time.

● Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be

wiped with a dry cloth when the power is off. However, never use organic solvent, such

as, alcohol, or ammonia-based liquids to clean your monitor.

● To avoid the risk of shock or permanent damage to the set, do not expose the monitor to

dust, rain, water, or excessive moisture environment.

● If your monitor gets wet, wipe it with dry cloth as soon as possible.

● If foreign substance or water gets in your monitor, please turn the power off immediately

and disconnect the power cord. Then, remove the foreign substance or water, and send

it to the maintenance center.

file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220B1-220P1/220B1-E...U/5B.0V301.001/CD-Contents/lcd/manual/ENGLISH/220B1/safety/safety.htm 第 1 頁 / 共 2 [98-06-18 17:01]

Safety and Troubleshooting Information

● Do not store or use the LCD monitor in locations exposed to heat, direct sunlight or

extreme cold.

● In order to maintain the best performance of your monitor and use it for a longer lifetime,

please use the monitor in a location that falls within the following temperature and

humidity ranges.

❍ Temperature: 0-40°C 32-95°F

❍ Humidity: 20-80% RH

● IMPORTANT: Always activate a moving screen saver program when you leave your

monitor unattended. Always activate a periodic screen refresh application if your LCD

monitor will display unchanging static content. Uninterrupted display of still or static

images over an extended period may cause burn in , also known as after-imaging or “ ” “ ”

“ ”ghost imaging , on your screen. "Burn-in", "after-imaging", or "ghost imaging" is a well-

known phenomenon in LCD panel technology. In most cases, the burned in or after-“ ” “

imaging or ghost imaging will disappear gradually over a period of time after the power ” “ ”

has been switched off.

WARNING: Severe burn-in or after-image or ghost image symptoms will ” ” “ ” “ ” not

disappear and be repaired. The damage mentioned above is not covered under cannot

your warranty.

Service:

● The casing cover should be opened only by qualified service personnel.

● If there is any need for any document for repair or integration, please contact with your

local service center. (please refer to the chapter of "Consumer Information Center")

● For transportation information, please refer to "Physical Specifications".

● Do not leave your monitor in a car/trunk under direct sun light.

Consult a service technician if the monitor does not operate normally, or you are

not sure what procedure to take when the operating instructions given in this

manual have been followed.

RETURN TO TOP OF THE PAGE

file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220B1-220P1/220B1-E...U/5B.0V301.001/CD-Contents/lcd/manual/ENGLISH/220B1/safety/safety.htm 第 2 頁 / 共 2 [98-06-18 17:01]