PetSafe Stay & Play PIF00-12917 Bedienungsanleitung

PetSafe niet gecategoriseerd Stay & Play PIF00-12917

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für PetSafe Stay & Play PIF00-12917 (33 Seiten) in der Kategorie niet gecategoriseerd. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/33
Please read this entire guide before beginning
PIF00-12917
Stay + Play Wireless Fence®
Operating Guide
2 1-800-732-2677
Hereinafter Radio Systems Corporation, Radio Systems PetSafe Europe Ltd., Radio Systems Australia Pty Ltd. and any other
affiliate or Brand of Radio Systems Corporation may be referred to collectively asWe” or “Us”.
Important Safety Information
Explanation of Attention Words and Symbols used in this guide
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible injury or death.
WARNING indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION, used without the safety alert symbol, indicates a hazardous situation which, if not
avoided, could result in harm to your pet.
NOTICE is used to address practices not related to personal injury.
Not for use with aggressive dogs. Do not use this product if your dog is prone to aggressive
behavior. Aggressive dogs can cause severe injury or death to their owners and others. If
you are not sure that this product is right for your dog, please talk to your veterinarian or a
certified trainer.
Risk of electric shock. Use the Fence Transmitter indoors in dry location only.
This PetSafe® Stay + Play Wireless Fence® system is NOT a solid barrier. The system is designed
to act as a deterrent to remind pets by Static Correction to remain in the boundary established. It
is important that you reinforce training with your pet on a regular basis. Since the tolerance level to
Static Correction varies from pet to pet, Radio Systems Corporation CANNOT guarantee that the
system will, in all cases, keep a pet within the established boundary. Not all pets can be trained
to avoid crossing the boundary! Therefore, if you have reason to believe that your pet may pose
a danger to others or harm himself if he is not kept from crossing the boundaries, you should NOT
rely solely upon the PetSafe Stay + Play Wireless Fence system to confine your pet. Radio Systems
Corporation shall NOT be liable for any property damage, economic loss or any consequential
damages, sustained as a result of any animal crossing the boundary.
Proper fit of the collar is important. A collar worn for too long or made too tight on the pets neck
may cause skin damage ranging from redness to pressure ulcers; this condition is commonly known
as bed sores.
Avoid leaving the collar on the dog for more than 12 hours per day.
When possible reposition the collar on the pets neck every 1 to 2 hours.
Check the fit to prevent excessive pressure; follow the instructions in this manual.
Never connect a lead to the electronic collar; it will cause excessive pressure on the contacts.
When using a separate collar for a lead, don’t put pressure on the electronic collar.
Wash the dogs neck area and the contacts of the collar weekly with a damp cloth.
Examine the contact area daily for signs of a rash or a sore.
If a rash or sore is found, discontinue use of the collar until the skin has healed.
If the condition persists beyond 48 hours, see your veterinarian.
For additional information on bed sores and pressure necrosis, please visit our website.
3www.petsafe.net
These steps will help keep your pet secure and comfortable. Millions of pets are comfortable while
they wear stainless steel contacts. Some pets are sensitive to contact pressure. You may find after
some time that your pet is very tolerant of the collar. If so, you may relax some of these precautions.
It is important to continue daily checks of the contact area. If redness or sores are found, discontinue
use until the skin has fully healed.
You may need to trim the hair in the area of the Contact Points. Never shave the dogs neck; this
may lead to a rash or infection.
Always remove your dogs Receiver Collar before performing any Transmitter testing.
The Receiver Collar should not be on your dog when the system is tested. Your pet may receive an
unintended correction.
The Boundary Zone must be tested whenever an adjustment is made to the Transmitter setting to
prevent unintended corrections to your pet.
If you use a collar and leash for training, be sure the extra collar does not put pressure on the
Contact Points.
To prevent an unintended correction, remove the Receiver Collar from your pet when indoors.
Never remove power from the system when the collar is on the pet. This may activate the
Receiver Collar.
Radio Systems Corporation recommends the use of an Uninterruptible Power Supply (UPS) for
use with your wireless fence. Should the power go out at your home, your pet will be unprotected.
Power outages can be unpredictable, and the use of a UPS will provide you with some time to
properly restrain your pet.
In rare instances, if your pet is near the boundary at the time when the power fails, it is possible that
your pet will receive a correction. This correction will stop after a 15 second timeout period has
been reached. This is due to the operation of the collar: the collar is activated by the absence of the
containment signal.
While results will vary depending on the UPS manufacturers specifications the following are typical
examples to guide your choice of UPS:
Using a 400 VA UPS a consumer should expect 1 hour of backup time.
Using a 900 VA UPS a consumer could expect 4 hours of backup time.
If settings below maximum fence size are used, additional backup time will result. At minimum fence
size settings backup time may be more than two times the backup time estimated at maximum
fence size.
To prevent an unintended correction, after the Boundary Flags have been placed, be sure to set
the Static Correction on the Receiver Collar back to Level 1 tone only.
Do not charge your Receiver Collar every night. Charging too often can reduce battery life.
Charge your Receiver Collar when the Receiver Indicator Light blinks yellow; or when the light
blinks red.
Do not place anything on the top of the Transmitter or cover any ventilation holes. This may
overheat the Transmitter and cause early transmit failure.
Do not place Transmitter in a closet or any other confined, unventilated area.
Do not place Transmitter on or near a metal surface.

Produktspezifikationen

Marke: PetSafe
Kategorie: niet gecategoriseerd
Modell: Stay & Play PIF00-12917

Brauchst du Hilfe?

Wenn Sie Hilfe mit PetSafe Stay & Play PIF00-12917 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung niet gecategoriseerd PetSafe

Bedienungsanleitung niet gecategoriseerd

Neueste Bedienungsanleitung für -Kategorien-