Penton SENTRY6ST/EN Bedienungsanleitung

Penton Speaker SENTRY6ST/EN

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Penton SENTRY6ST/EN (1 Seiten) in der Kategorie Speaker. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
RoHS
Penton UK Ltd
Unit 2 Teville Industrials | Dominion Way | Worthing West Sussex | | BN14 8NW
T: +44 (0)1903 215315 F: +44(0)1903 215415 E: sales@pentonuk.co.uk | |
www.pentonuk.co.uk
1. LOUDSPEAKER ENCLOSURE
2. REFERENCE AXIS
3. REFERENCE PLANE
4. HORIZONTAL PLANE
VANDALPROOF METAL
CABINET LOUDSPEAKER
f SENTRY6ST/EN
f SENTRY6ST/ENC
EN54-24
INSTALLATION INSTRUCTIONS
EN54-24:2008
Certificate No: 0359-CPD-0165 TYPE A
f SENTRY6ST/EN
f SENTRY6ST/ENC
* with capacitor
ZCL0504-079
OCTOBER 2012
COMMON
0.25W
0.75W
1.5W
3W
6W
1. Decide on the back box
orientation. Normally the back
box is installed with the 3 x
20mm knockouts facing
upwards. However the back
box can be installed in any
orientation as well as
horizontally on a ceiling if
required.
2. The back box has the
option of glanding cable directly
into any of the 3 x 20mm
knockouts or through the rear of
the cabinet.
3. Secure the back box to a
flat surface using the fixing holes
provided. (Fixings are not
included). Do not forget to fit the
rubber "O" ring between the wall
and back box before fixing to the
wall. This will ensure that the
screw fixings and any rear cable
entry will be sealed from water
ingress.
4. Once the back box has been
fixed securely to the surface the
installation cable can be fitted as
required. The cable can then be
terminated into the terminal block
fitted to the back box. The
terminals are suitable to take
"loop in" "loop out" connections up
to 2.5mm per core.
5. Take the speaker plate and
connect the 3 pre-installed wires
from the terminal block on the
back box to the spade terminals
provided on the speaker
transformer.
6. Slot the speaker plate on to the
retaining lug "A" and then push the
speaker into the back box. Tighten the
grub screw "B" until it firmly hold the
speaker plate. Be careful not to over
tighten the grub screw.
O Ring

Produktspezifikationen

Marke: Penton
Kategorie: Speaker
Modell: SENTRY6ST/EN

Brauchst du Hilfe?

Wenn Sie Hilfe mit Penton SENTRY6ST/EN benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Speaker Penton

Bedienungsanleitung Speaker

Neueste Bedienungsanleitung für -Kategorien-