Penton PBC6T/EN Bedienungsanleitung

Penton Lautsprecher PBC6T/EN

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Penton PBC6T/EN (1 Seiten) in der Kategorie Lautsprecher. Dieser Bedienungsanleitung war für 37 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

RoHS

Penton UK Ltd

Unit 2 Teville Industrials | Dominion Way | Worthing West Sussex | | BN14 8NW

T: +44 (0)1903 215315 F: +44(0)1903 215415 E: sales@pent onuk.co.uk | |

www.pentonuk.co.uk

1. LOUDSPEAKER

ENCLOSURE

2. REFERENCE AXIS

3. REFERENCE PLANE

4. HORIZONTAL PLANE

MOULDED CABINET

LOUDSPEAKERS

f PBC6T/EN

f PBC6T/ENC

EN54-24

INSTALLATION INSTRUCTIONS

EN54-24:2008

Certificate No: 0359-CPD-0167 TYPE A

f PBC6T/EN

f PBC6T/ENC

* with capacitor

1. Decide on the speaker orientation and place the speaker on a flat

surface . It can be installed in any orientation as well as horizontally on a

ceiling if required. Mark through the mounting holes in order to position

the fixing points which will be 210mm apart. A "Picture Hook" type

mounting is also provided which is located at the top section of the

speaker.See drawing marked "Key Hole". Prepare the surface to take suitable

fixings (Not included).

2. If 20mm cable glands are to be used then the speaker cabinet can be

drilled using a suitable drill bit. Make sure you place the cable entry in a

location that will not cause the cable to be blocked or restricted by any

internal components. If you are not using cable glands the back of the

speaker cabinet has 2 x "knock out" tabs in the top and side which when

removed will allow the speaker cable to pass between the speaker and

mounting surface.

3. Connect the speaker cable into the 3 way terminal block located on the

cabinet. Select your required tapping by moving the white lead to your chosen

tapping on the transformer. All tappings are marked on top of the transformer.

4. Fix the speaker cabinet to the wall using suitable fixings (not provided).

5. Fit the 2 x removable covers over the fixing holes..

ZCL0504-075

JANUARY 2013

Circuit Diagram

Produktspezifikationen

Marke:	Penton
Kategorie:	Lautsprecher
Modell:	PBC6T/EN
Breite:	330 mm
Tiefe:	90 mm
Gewicht:	1150 g
Empfohlene Nutzung:	Universal
Produktfarbe:	Weiß
Übertragungstechnik:	Kabelgebunden
Impedanz:	8 Ohm
Höhe:	240 mm
RMS-Leistung:	6 W
AC Eingangsspannung:	100 V
Betriebstemperatur:	-10 - 55 °C
Relative Luftfeuchtigkeit in Betrieb:	0 - 95 %
Gehäusematerial:	Kunststoff
Audio Kanäle:	- Kanäle
Anzahl des Antriebs:	1
Frequenzbereich:	160 - 18000 Hz
Lautsprecherplatzierung:	Wandmontierbar
Verstärker:	Nein
Transformatorabgriffe:	1.5, 3,6 W
Eingebauter Anpassungstransformator:	Ja