Pavo AlaskaVigo A3 Bedienungsanleitung
Pavo
Laminiersystem
AlaskaVigo A3
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Pavo AlaskaVigo A3 (12 Seiten) in der Kategorie Laminiersystem. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
1
Instruction Manual
Model: A3 / A4 AlaskaVigor
Read this manual carefully before use. Keep it in safe for reference in need.
Thank you for buying this high-performance laminator! This laminator features a slim and
compact design. It accepts pouches ranging from cold,
75Mic, 100Mic, 125mic and 250mic with size from name card to A4/A3.
2
PRODUCT DESCRIPTION
SPECIFICATION
Voltage: 220-240V/50Hz Power: 4A/850W Model A4
5.6A/1300W Model A3
Ready time: 60 sec/75mic in 25℃
room temperature
Max Entry width: 230 mm Model A4
320 mm Model A3
Max thickness: 0.6 mm (paper & pouch) Best for pouch: Cold/75/100/125/250
Micron
Laminating speed: 300mm/Min No. of Rollers: 4
SAFETY NOTES
1. This laminator should be horizontally displayed in a flat plane with good ventilation.
2. This laminator should only use power 220-240V/50Hz and be used indoors only.
3. This laminator is for home and office use only.
4. NEVER OPEN THIS LAMINATOR WHILE IN USE.
UTILITY
It laminates both cold and hot pouches from name card size to A4/A3 size. It provides best
lamination for hot pouches of 75Mic, 100Mic, 125mic and 250mic. It preserves your photo,
document and card, etc. in its original color against aging from prolonged time.
Entry
LED
Switch Button
Reverse Button
Mode Button
3
OPERATION
POWER ON and OFF
Connect the plug to mains power, press "Switch Button" and "Mode Button" to turn on the
machine. The "Power/Cold LED" would turn into Red firstly and flash, it will turn into green
when ready.
To turn off this laminator, press "Switch Button" back to "Off" position, power will be cut off
and laminator is shut off.
COLD LAMINATION
Please make sure the machine is cool when you use cold lamination. Do not use cold
lamination if you just finish the job of hot lamination. Please switch the power off and the
machine will reset itself.
When "Power/Cold LED" turns into green and stays steady, please insert the paper into the
cold pouch, and insert the pouch into laminator through lamination entry.
HOT LAMINATION
You could press down the "Mode Button" to select the pouch thickness (75mic, 100mic,
125mic and 250mic), the correspondent LED would turn into Red and flash, when it turns
into Green and stays steady, please insert the paper into pouch, and insert the pouch into the
laminator through the lamination entry.
Note:
1. If the room temperature is cold, the warm up time would be a bit longer.
2. The warm up time for thicker pouch would be longer than 75micron pouch.
CLEAR THE JAMMED POUCH
This laminator is designed with an device to clear the jammed pouch. When auto jam release
a misfeed or jam occurs, press down "reverse button", The jammed pouch will be pulled out
automatically.
AUTO STOP
To save precious energy, this machine is designed to be shut off automatically when not be
used over 60 minutes. When the machine shut off automatically, all LEDs turn off. Under this
condition, there's still weak electric current inside, if you do not use this machine in a certain
period, please pull out the plug from the socket-outlet to shut it off completely.
In case machine is shut off automatically, to start machine again, please press "Mode" button
to turned on the machine again.
Produktspezifikationen
| Marke: | Pavo |
| Kategorie: | Laminiersystem |
| Modell: | AlaskaVigo A3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Pavo AlaskaVigo A3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Laminiersystem Pavo
29 August 2024
29 August 2024
29 August 2024
Bedienungsanleitung Laminiersystem
- Laminiersystem Exibel
- Laminiersystem Hama
- Laminiersystem Nedis
- Laminiersystem MarQuant
- Laminiersystem Olympia
- Laminiersystem United Office
- Laminiersystem Sencor
- Laminiersystem Brother
- Laminiersystem Leitz
- Laminiersystem Rexel
- Laminiersystem Q-CONNECT
- Laminiersystem Fellowes
- Laminiersystem GBC
- Laminiersystem Ednet
- Laminiersystem Desq
- Laminiersystem Genie
- Laminiersystem Peach
- Laminiersystem Royal Sovereign
- Laminiersystem Aurora
- Laminiersystem Tracer
- Laminiersystem GFP
Neueste Bedienungsanleitung für -Kategorien-
30 September 2024
29 September 2024
27 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
4 September 2024