Paradigm PT-2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Paradigm PT-2 (2 Seiten) in der Kategorie Hi-Fi-Anlage. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
SAFETY PRECAUTIONS:
Read this section carefully
before proceeding!
IMPORTANT SAFETY INSTRUCTIONS
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol within
an equilateral triangle, is intended to alert the
user to the presence of uninsulated Dangerous
voltagewithin the product’s enclosure that may
be of sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (Servicing) instructions in the
literature accompanying the product.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE, AND OBJECTS
FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON
THIS APPARATUS.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION:
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,
REPLACE THE FUSE ONLY WITH THE SAME AMPERAGE AND VOLTAGE
TYPE. REFER REPLACEMENT TO QUALIFIED SERVICE PERSONNEL.
WARNING:
UNIT MAY BECOME HOT. ALWAYS PROVIDE ADEQUATE
VENTILATION TO ALLOW FOR COOLING. DO NOT PLACE NEAR A HEAT
SOURCE, OR IN SPACES THAT CAN RESTRICT VENTILATION.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry a cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer or sold with the
apparatus. When a cart is used, use caution when
moving the cart/ apparatus combination, to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for
long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15) DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING
AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, ARE PLACED ON THE APPARATUS.
16) TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC
MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE
AC RECEPTACLE.
17) THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN
READILY OPERABLE.
Owners Manual
MAN0043
www.paradigm.com
Paradigm Electronics reserves the right to change specifications and/or features
without notice as design improvements are incorporated.
Paradigm Electronics Inc.
In the U.S.: MPO Box 2410, Niagara Falls, NY 14302
In Canada/International: 205 Annagem Blvd., Mississauga, ON L5T 2V1
Designed and engineered in North America. Made in China.
Paradigm®PT-2 is warranted to be and remain free of manufacturing and/or
material defects for a period of three (3) years from the date of the original retail
purchase. Within this specified period, repair, replacement or adjustment of parts
for manufacturing and/or material defects will be free of charge.
Thermal or mechanical abuse/misuse is not covered under warranty.
Limitations:
Warranty begins on date of original retail purchase from an Authorized
Paradigm®Dealer only. It is not transferable;
Warranty applies to product in normal home use only. If the product is
subjected to any of the conditions outlined in the next section, warranty is void;
Warranty does not apply if the product is used in professional or commercial
applications.
Warranty is Void if:
The product has been abused (intentionally or accidentally);
The product has been used in conjunction with unsuitable or faulty equipment;
The product has been subjected to damaging signals, derangement in
transport, mechanical damage or any abnormal conditions;
The product (including cabinet) has been tampered with or damaged by an
unauthorized service facility;
The serial number has been removed or defaced.
What You Are Responsible For:
Provide normal/reasonable operating care and maintenance;
Provide or pay for transportation charges for product to service facility;
Provide proof of purchase (your sales receipt given at time of purchase from
your Authorized Paradigm®Dealer).
Should servicing be required, contact your nearest Authorized Paradigm ®
Reference Dealer, Paradigm Electronics Inc., or Import Distributor (outside the
U.S. and Canada) to arrange, bring in or ship prepaid any defective unit. Visit our
website at www.paradigm.com for more information.
Paradigm Electronics Inc. reserves the right to improve the design of any product
without assuming any obligation to modify any product previously man ufactured.
This warranty is in lieu of all other warranties expressed or implied, of
merchantability, fitness for any particular purpose and may not be extended or
enlarged by anyone. In no event shall Paradigm Electronics Inc., their agents, or
representatives be responsible for any incidental or consequential damages.
Some jurisdictions do not allow limitation of incidental or consequential damages,
so this exclusion may not apply to you.
Retain this manual and your sales receipt for proof of warranty term and proof
of purchase.
WARRANTY
-
-
-
-
-
-
-+
+
+
+
-
-
+
+
+
+-
-
-
--
-
+
+
-
-
+
+-
-
-
++
+
+
-
-
-
-
-
-+
+
+
+
-
-
+
+
+
+
-
-
-+
+
-
+
+-
-
-
-
RECYCLING AND REUSE GUIDELINES FOR EUROPE
In accordance with the European Union WEEE (Waste Electrical and Electronic
Equipment) directive effective August 13, 2005, we would like to notify you that
this product may contain regulated materials which, upon disposal, according
to the WEEE directive, require special reuse and recycling processing. For this
reason Paradigm Electronics Inc. (manufacturers of Paradigm speakers and
Anthem electronics) has arranged with our distributors in European Union
member nations to collect and recycle this product at no cost to you. To find
your local distributor please contact the dealer from whom you purchased this
product or go to our website at
www.pa
www.pa
www.pa
www.pawww.paradigm.
radigm.
radigm.
radigm.radigm.com
com
com
comcom.
Please note that the product only falls under the WEEE directive. When
disposing of packaging and other shipping material we encourage you to
recycle through the normal channels.
This device contains FCC ID: YZY-HT205 and IC ID: 9261A-HT205. This device
complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that
may cause undesired operation.
ABOUT YOUR PT-2 TRANSMITTER
PANEL LAYOUTS
WIRELESS SYNC INSTRUCTIONS
LATENCY SWITCH INSTRUCTIONS
+
+
+
-
- -
-
-
+
+
B
A
LED STATUS
Wireless
Subwoofer
Receiver
Receiver
Wireless
Subwoofer
Receiver
Wireless
Subwoofer
Paradigm VC-150
Volume Control
SPEAKER-LEVEL CONNECTION,
VOLUME CONTROLLED BY RECEIVER
LINE-LEVEL CONNECTION (NO SUB-OUT/LFE):
VOLUME CONTROLLED BY RECEIVER
SPEAKER-LEVEL CONNECTION:
VOLUME CONTROLLED EXTERNALLY (ZONE 2)
Zone 2 volume level of full-range speakers and subwoofer may be controlled
by the Paradigm VC-150 Volume Control
(sold separately)
.Requires running
speaker wire from the Paradigm VC-150 Volume Control back to the
Paradigm PT-2 transmitter.
1. Plug in PT-2
wireless transmitter.
2. Press and hold sync button on front panel of PT-2 for
3
seconds. The
LED will blink quickly
.
3. Wit
hi n 60
secs of pressing the sync butto
n all subwoofers
must be plugged in. Once all s
ubwoofers are synched, the
LED will remain ‘on’.
Off: No power.
Fast blinking: Set-up mode.
Dim: Unit in standby mode, no transmission.
Slow blinking, ‘off’ to bright: Waking from standby mode
and synching.
Slow blinking, dim to bright: At least one subwoofer is synched.
Permanently On: All subwoofers synched and receiving signal.
B
A
TIP! Once all subwoo
fers hav
e been synched, if ne
cessary they
can be u
nplugge
d and moved witho
ut resynching again.
The latency switch adjusts the delay between the PT-2’s audio
signal input and the subwoofer receiver’s RF output, optimizing
integrity of the wireless transmission. Start with the switch
in the 15ms position. If you experience sound quality issues
(i.e drop-outs, pops, ticks), you can improve the connection by
moving the switch to 20ms or 25ms to increase latency.
Receiver without line-level connection.
Receiver without bass management.
-
-
--
-
+
+
-
-
+
+-
-
-
++
+
+
/Sub-In
Sub-Out
Receiver
Wireless
Subwoofer
LINE-LEVEL CONNECTION (WITH SUB-OUT/LFE):
VOLUME CONTROLLED BY RECEIVER
Receiver with bass management.
Vo
lume Con
trol
occurs
at
receive
r.
In a typical listening room the PT-2 transmitter has a
maximum range of 50’ (15 m). Obstructions such as walls,
large pieces of furniture, room dividers, etc., may reduce this
range. Do not place subwoofer(s) and transmitter farther
apart than the recommended range. The PT-2 is a 2.4 GHz
digital design that automatically adjusts for best wireless
connection while constantly monitoring the integrity of the
data stream. An RCA audio cable is required (not included) to
connect it to your A/V receiver or preamplifier (see dealer).
One PT-2 transmitter can be used with up to four wireless
Paradigm subwoofers. See dealer for full details on connecting
multiple subwoofers.
Zone 2 Operation
Your PT-2 transmitter will work with a subwoofer(s) in a second
zone (i.e. another area of your home).
TIP! To minimize the chance of signal dropouts or signal
interference, keep the PT-2 transmitter out of range of a
microwave oven, mobile telephone or a Bluetooth device
operating on the same frequency.
IMPORTANT! Paradigm recommends using
speaker-level line-level connections.OR DO
NOT USE BOTH CONNECTIONS AT THE
SAME TIME.
Your PT-2 transmitter is designed to work
with Paradigm brand subwoofers only.
C
C
All subwoofers must be unplugged from outlets.


Produktspezifikationen

Marke: Paradigm
Kategorie: Hi-Fi-Anlage
Modell: PT-2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Paradigm PT-2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Hi-Fi-Anlage Paradigm

Bedienungsanleitung Hi-Fi-Anlage

Neueste Bedienungsanleitung für -Kategorien-