Paradigm CS-LCR v2 Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Paradigm CS-LCR v2 (3 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war fĂĽr 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
3
CS-50R
CS-150
CS-80R
CS-160
CS-LCR
CS-60SQ-SM
CS-60R-SM
CS-60R-30
CS-60R
WHITE, PAINTABLE
High-Strength IRP™Injection-
Molded Ribbed Polymer Chassis
solve the flexibility problem and
dramatically reduce resonances and
vibrations behind the wall or ceiling.
Superior Mineral-Filled Poly-
propylene Cones with oversized
magnets. Deliver authentic, detailed
midrange performance with solid
extended bass.
Superior PTD™Pure-Titanium
Domes with ferro-fluid cooling and
damping deliver extended smooth high-
frequency performance with superb
clarity across a wide listening area.
Full-perimeter bracket design
Unlike typical mounting ears, brackets
cover the full diameter or height and
width of the speaker chassis to effectively
sandwich and strengthen the area around
the mounting hole.
4
BEHIND THE SCENES
Why settle for look-alike in-wall/in-ceiling speakers—those that at first glance look similar, but in the end can’t perform,
when you can get the superior sound of CS Series speakers. Extended high-frequency performance, a detailed and
authentic midrange and full-bandwidth bass bring the high-performance sound of CS Series speakers to any room
in your home. Also ideal for use in offices, restaurants, etc.
SOLO PERFORMERS: CS-60R-SM & CS-60SQ-SM
• Two PTD™Pure-Titanium High-Frequency Domes offset at 30° angles
• Dual Voice-Coil Mineral-Filled Polypropylene Bass/Midrange Cone
“SM” (stereo/mono) speakers offer rich pure-fidelity dual-channel L/R sound from a single speaker. Their Dual-
Directional Soundfield™provides wider-than-normal dispersion making them ideal for use in small rooms less suited
to a stereo pair (Fig.1), or where a single speaker is preferred. In larger spaces, using multiple “SM” speakers
eliminates the sound imbalances that occur with separate stereo speakers as people move around, or are seated closer
to one speaker than the other (Fig. 2). Ideal for use as in-wall/in-ceiling surround and/or rear speakers (Fig. 3).
GUIDED SOUNDFIELD™SYSTEM: CS-60R-30
The CS-60R-30’s Guided Soundfield™system allows you to guide a wide arc of sound toward a specific area of
the room, much the same way we guide a floodlight to fill an area with light. Drivers sit at a 30° angle from the
ceiling enabling you to adjust the direction of sound (Fig. 4), without compromising the crucial sound dispersion
pattern between drivers, or the interaction between drivers and baffle, thereby preserving sonic integrity. These speakers
are also ideal for use as surround and/or rear speakers. Guiding the sound towards the sides or rear of the room
creates an enveloping, reverberant soundfield (Fig.5) similar to that provided by Paradigm’s ADP
™technology.
VC-150 Volume Control
(see the specification pages for full details) Fig. 1
Top view of rooms:
Fig. 2 Fig. 3 Fig. 4 Fig. 5
Fig. 1 Fig. 2 Fig. 3
PLACEMENT
Your high quality home deserves high quality sound!
Fig. 4 Fig. 5
2-driver, 2-way in-ceiling, drivers mounted at 30° relative to
mounting surface, IRP™chassis/mounting bracket
2nd-order electro-acoustic at 2.5 kHz
25-mm (1 in) PTD™dome
165-mm (6-1/2 in) mineral-filled polypropylene cone
55 Hz (DIN)
±2 dB from 70 Hz – 20 kHz
±2 dB from 70 Hz – 15 kHz
89 dB / 85 dB
15 – 80 watts
50 watts
Compatible with 8 ohms
29.3 cm / 11-1/2 in
12.0 cm / 4-3/4 in
26.3 cm / 10-6/16 in
12 L / 0.42 cu ft
2.4 kg / 5.3 lb each
White, paintable
PB-10R; retrofit included
2-driver, 2-way in-ceiling/in-wall, coaxially mounted high-
frequency driver, IRP™chassis/mounting bracket
2nd-order electro-acoustic at 2.5 kHz
25-mm (1 in) PTD™dome
210-mm (8 in) mineral-filled polypropylene cone
45 Hz (DIN)
±2 dB from 60 Hz – 20 kHz
±2 dB from 60 Hz – 18 kHz
90 dB / 86 dB
15 – 90 watts
60 watts
Compatible with 8 ohms
26.4 cm / 10-6/16 in
7.6 cm / 3 in
23.2 cm / 9-2/16 in
16 L / 0.56 cu ft
2.0 kg / 4.4 lb each
White, paintable
PB-9R; retrofit included
2-driver, 2-way in-wall/in-ceiling, IRP™chassis/
mounting bracket
2nd-order electro-acoustic at 2.5 kHz
19-mm (3/4 in) PTD™dome
140-mm (5-1/2 in) mineral-filled polypropylene cone
60 Hz (DIN)
±2 dB from 75 Hz – 20 kHz
±2 dB from 75 Hz – 18 kHz
88 dB / 84 dB
15 – 80 watts
50 watts
Compatible with 8 ohms
25.5 cm x 17.5 cm / 10-1/16 in x 6-14/16 in
5.4 cm / 2-2/16 in
23.2 cm x 15.2 cm / 9-2/16 in x 6 in
6 L / 0.22 cu ft
1.2 kg / 2.5 lb each
White, paintable
PB-6x9; retrofit included
2-driver, 2-way in-wall/in-ceiling, IRP™chassis/
mounting bracket
2nd-order electro-acoustic at 2.5 kHz
19-mm (3/4 in) PTD™dome
165-mm (6-1/2 in) mineral-filled polypropylene cone
55 Hz (DIN)
±2 dB from 70 Hz – 20 kHz
±2 dB from 70 Hz – 18 kHz
89 dB / 85 dB
15 – 90 watts
60 watts
Compatible with 8 ohms
28.1 cm x 20.0 cm / 11-2/16 in x 7-14/16 in
6.0 cm / 2-6/16 in
25.8 cm x 17.7 cm / 10-2/16 in x 6-15/16 in
12 L / 0.42 cu ft
1.6 kg / 3.5 lb each
White, paintable
PB-7x10; retrofit included
3-driver, 2-way in-wall left/center/right, IRP™chassis/
mounting bracket
2nd-order electro-acoustic at 2.5 kHz
19-mm (3/4 in) PTD™dome
Two 140-mm (5-1/2 in) mineral-filled polypropylene cones
60 Hz (DIN)
±2 dB from 75 Hz – 20 kHz
±2 dB from 75 Hz – 18 kHz
89 dB / 85 dB
15 – 100 watts
70 watts
Compatible with 8 ohms
23.1 cm x 31.8 cm / 9-2/16 in x 12-1/2 in
6.4 cm / 2-1/2 in
20.8 cm x 29.5 cm / 8-3/16 in x 11-10/16 in
12 L / 0.42 cu ft
2.7 kg / 5.9 lb each
White, paintable
PB-8x12; retrofit included
Design
Crossover
High-Frequency Driver
Bass/Midrange Driver(s)
Low-Frequency Extension*
Frequency Response:
On-Axis
30ËšOff-Axis
Sensitivity – Room/Anechoic
Suitable Amplifier Power Range
Maximum Input Power†
Impedance
External Dimensions: (D or H x W)
Minimum Mounting Depth**
Cutout Dimensions: (D or H x W)
Minimum Internal Volume Required
Weight (unpacked)
Finish
Pre-Construction Bracket (sold sep.)
CS-50R CS-60R CS-60R-SM CS-60SQ-SM
2-driver, 2-way in-ceiling/in-wall, coaxially mounted
high-frequency driver, IRP™chassis/mounting bracket
2nd-order electro-acoustic at 3.0 kHz
19-mm (3/4 in) PTD
™dome
140-mm (5-1/2 in) mineral-filled polypropylene cone
60 Hz (DIN)
±2 dB from 75 Hz – 20 kHz
±2 dB from 75 Hz – 18 kHz
88 dB / 84 dB
15 – 70 watts
40 watts
Compatible with 8 ohms
19.4 cm / 7-10/16 in
5.7 cm / 2-1/4 in
16.6 cm / 6-9/16 in
6 L / 0.22 cu ft
1.2 kg / 2.5 lb each
White, paintable
PB-7R; retrofit included
2-driver, 2-way in-ceiling/in-wall, coaxially mounted
high-frequency driver, IRP™chassis/mounting bracket
2nd-order electro-acoustic at 3.0 kHz
19-mm (3/4 in) PTD™dome
165-mm (6-1/2 in) mineral-filled polypropylene cone
55 Hz (DIN)
±2 dB from 70 Hz – 20 kHz
±2 dB from 70 Hz – 18 kHz
89 dB / 85 dB
15 – 80 watts
50 watts
Compatible with 8 ohms
22.1 cm / 8-3/4 in
6.0 cm / 2-6/16 in
19.3 cm / 7-10/16 in
12 L / 0.42 cu ft
1.6 kg / 3.5 lb each
White, paintable
PB-8R; retrofit included
Single speaker system with stereo L/R inputs, 3-driver,
2 x 2-way in-ceiling/in-wall, coaxially mounted high-
frequency drivers, IRP ™chassis/mounting bracket
Two 2nd-order electro-acoustic at 3.0 kHz
Two 19-mm (3/4 in) PTD™domes
Dual voice-coil, 165-mm (6-1/2 in) mineral-filled
polypropylene cone
52 Hz (DIN)
±2 dB from 70 Hz – 20 kHz
±2 dB from 70 Hz – 15 kHz
89 dB / 85 dB
15 – 80 watts Mono;
15 – 40 watts/channel Stereo Input
50 watts
Compatible with 4 ohms Mono;
8 ohms/channel Stereo Input
22.1 cm / 8-3/4 in
6.0 cm / 2-6/16 in
19.3 cm / 7-10/16 in
12 L / 0.42 cu ft
1.6 kg / 3.5 lb each
White, paintable
PB-8R; retrofit included
Single speaker system with stereo L/R inputs, 3-driver,
2 x 2-way in-wall/in-ceiling, coaxially mounted high-
frequency drivers, IRP ™chassis/mounting bracket
Two 2nd-order electro-acoustic at 3.0 kHz
Two 19-mm (3/4 in) PTD™domes
Dual voice-coil, 165-mm (6-1/2 in) mineral-filled
polypropylene cone
52 Hz (DIN)
±2 dB from 70 Hz – 20 kHz
±2 dB from 70 Hz – 15 kHz
89 dB / 85 dB
15 – 80 watts Mono;
15 – 40 watts/channel Stereo Input
50 watts
Compatible with 4 ohms Mono;
8 ohms/channel Stereo Input
20.0 cm x 20.0 cm / 7-14/16 in x 7-14/16 in
7.1 cm / 2-3/4 in
17.8 cm x 17.8 cm / 7 in x 7 in
12 L / 0.42 cu ft
1.6 kg / 3.5 lb each
White, paintable
PB-7x7; retrofit included
Design
Crossover(s)
High-Frequency Driver(s)
Bass/Midrange Driver
Low-Frequency Extension*
Frequency Response:
On-Axis
30Ëš Off-Axis
Sensitivity – Room/Anechoic
Suitable Amplifier Power Range
Maximum Input Power†
Impedance
External Dimensions: (D or H x W)
Minimum Mounting Depth**
Cutout Dimensions: (D or H x W)
Minimum Internal Volume Required
Weight (unpacked)
Finish
Pre-Construction Bracket (sold sep.)
CS Series
CS-60R-30 |GUIDED SOUNDFIELD™ SYSTEM CS-80R CS-150 CS-160 CS-LCR


Produktspezifikationen

Marke: Paradigm
Kategorie: Nicht kategorisiert
Modell: CS-LCR v2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Paradigm CS-LCR v2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Paradigm

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung fĂĽr -Kategorien-