Panasonic SC-AKX520E Bedienungsanleitung
Panasonic
Stereoanlage
SC-AKX520E
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Panasonic SC-AKX520E (2 Seiten) in der Kategorie Stereoanlage. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
Operating Instructions
CD Stereo System
Model No. SC-AKX520
SC-AKX320
Thank you for purchasing this product.
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
Panasonic Corporation
Web Site: http://www.panasonic.com
© Panasonic Corporation 2019
E
TQBJ2170-1
L0119LC3019
En
GN
Manufactured by:
Importer for Europe:
Panasonic Corporation
Kadoma, Osaka, Japan
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
This illustration shows SC-AKX320.
These operating instructions are applicable for models SC-AKX520 and
SC-AKX320.
[AKX520]: Indicate features applicable to SC-AKX520.
[AKX320]: Indicate features applicable to SC-AKX320.
Unless otherwise indicated, illustrations in these operating instructions
are of SC-AKX320.
Your system and the illustrations can look differently.
Back of product
The symbols on this product (including the accessories) represent the
following:
Safety precautions
WARNING!
Unit
• To reduce the risk of fire, electric shock or product damage,
– Do not expose this unit to rain, moisture, dripping or splashing.
– Do not place objects filled with liquids, such as vases, on this unit.
– Use the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to qualified service
personnel.
– Do not let metal objects fall inside this unit.
CAUTION!
Unit
• To reduce the risk of fire, electric shock or product damage,
– Do not install or place this unit in a bookcase, built-in cabinet or in
another confined space. Ensure this unit is well ventilated.
– Do not obstruct this unit’s ventilation openings with newspapers,
tablecloths, curtains, and similar items.
– Do not place sources of naked flames, such as lighted candles, on
this unit.
• This unit is intended for use in moderate climates.
• This unit may receive radio interference caused by mobile telephones
during use. If such interference occurs, please increase separation
between this unit and the mobile telephone.
• This unit utilizes a laser. Use of controls or adjustments or performance
of procedures other than those specified herein may result in hazardous
radiation exposure.
• Set the unit up on an even surface away from direct sunlight, high
temperatures, high humidity, and excessive vibration.
AC mains lead
• The mains plug is the disconnecting device. Install this unit so that the
mains plug can be unplugged from the socket outlet immediately.
Battery
• Danger of explosion if battery is incorrectly replaced. Replace only with
the type recommended by the manufacturer.
• When disposing of the batteries, please contact your local authorities or
dealer and ask for the correct method of disposal.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
• Do not break open or short-circuit the battery.
• Do not charge the alkaline or manganese battery.
• Do not use the battery if the cover has peeled off.
• Remove the battery if you do not use the remote control for a long
period of time. Keep in a cool, dark area.
Caution for AC mains lead
(For the AC mains plug of three pins)
For your safety, please read the following text carefully.
This appliance is supplied with a moulded three pin mains plug for your
safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement
fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to
BS1362.
Check for the ASTA mark or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is
refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement
cover is obtained.
A replacement fuse cover can be purchased from your local dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug
(figures A and B). Confirm the AC mains plug fitted and follow the
instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
System SC-AKX520 SC-AKX320
Main unit SA-AKX520 SA-AKX320
Speakers SB-AKX440 SB-AKX220
AC
Class II equipment (The construction of the product is
double-insulated.)
ON
Standby
Figure A Figure B
Figure A Figure B
Fuse cover
Fuse (5 ampere) Fuse (5 ampere)
█
NORSK
ADVARSEL!
Produkt
• For å redusere faren for brann, elektrisk støt eller skade på apparatet:
– Dette apparatet må ikke utsettes for regn, fuktighet, drypp eller sprut.
– Ikke plasser objekter som er fylt med væske, som vaser, på apparatet.
– Bruk anbefalt tilbehør.
– Fjern ikke deksler.
– Dette apparatet må ikke repareres på egen hånd. Overlat
servicearbeider til kvalifisert servicepersonell.
FORSIKTIG!
Produkt
• For å redusere faren for brann, elektrisk støt eller skade på apparatet:
– Ikke plasser apparatet i en bokhylle, et innebygget kabinett eller et
annet lukket sted. Pass på at apparatet er godt ventilert.
– Apparatets ventilasjonsåpninger må ikke dekkes til med aviser, duker,
gardiner eller lignende.
– Plasser ikke åpen ild, slik som levende lys, oppå apparatet.
• Dette apparatet er beregnet til bruk under moderate klimaforhold.
• Dette apparatet anvender en laser. Betjening av kontroller, justeringer
eller andre inngrep enn de som er beskrevet i denne bruksanvisning,
kan føre til farlig bestråling.
Vekselstrømnett
• Støpselet er frakoblende enhet. Strømuttaket må befinne seg i
nærheten slik at støpselet lett kan kobles ut fra uttaket umiddelbart.
Maintenance
Disconnect the AC mains lead before maintenance. Clean this
system with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this system.
• Before using chemically treated cloth, read the instructions that came
with the cloth carefully.
Disposal of Old Equipment and Batteries
Only for European Union and countries with recycling systems
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical and
electronic products and batteries must not be mixed with
general household waste.
For proper treatment, recovery and recycling of old products
and used batteries, please take them to applicable collection
points in accordance with your national legislation.
By disposing of them correctly, you will help to save
valuable resources and prevent any potential negative
effects on human health and the environment.
For more information about collection and recycling,
please contact your local municipality.
Penalties may be applicable for incorrect disposal of this
waste, in accordance with national legislation.
Note for the battery symbol (bottom symbol):
This symbol might be used in combination with a chemical
symbol. In this case it complies with the requirement set by
the Directive for the chemical involved.
Safety information for customers in the EU
English
Declaration of Conformity (DoC)
Hereby, “Panasonic Corporation” declares that this product is in
compliance with the essential requirements and other relevant provisions
of Directive 2014/53/EU.
Customers can download a copy of the original DoC to our RE products
from our DoC server:
http://www.ptc.panasonic.eu
Contact to Authorised Representative:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Germany
Latviski
Atbilstības deklarācija (DoC)
Ar šo “Panasonic Corporation” paziņo, ka šis izstrādājums atbilst
pamatprasībām un pārējiem Direktīvas 2014/53/ES noteikumiem.
Pircēji var lejupielādēt oriģinālo DoC kopiju mūsu RE izstrādājumos no
mūsu DoC servera:
http://www.ptc.panasonic.eu
Lūdzam sazināties ar pilnvaroto parstāvi:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Vācijā
Lietuviškai
Atitikties deklaracija (AD)
Bendrovė “Panasonic Corporation” patvirtina, kad šis gaminys atitinka
direktyvos 2014/53/ES esminius reikalavimus ir kitas taikytinas
nuostatas.
Mūsų RE gaminių originalios atitikties deklaracijos kopiją klientai gali
atsisiųsti iš mūsų AD serverio:
http://www.ptc.panasonic.eu
Įgaliotojo atstovo adresas:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Vokietija
Slovensko
Izjava o skladnosti (DoC)
“Panasonic Corporation” v tem dokumentu izjavlja, da je izdelek v skladu
z bistvenimi zahtevami in drugimi pomembnimi določbami Direktive
2014/53/EU.
Stranka lahko naloži izvod izvirnega DoC o naših izdelkih RE s strežnika
DoC:
http://www.ptc.panasonic.eu
Naslov pooblaščenega predstavnika:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Nemčija
Slovensky
Vyhlásenie o zhode (DoC)
“Panasonic Corporation” týmto vyhlasuje, že tento výrobok je v súlade so
základnými požiadavkami a ďalšími príslušnými ustanoveniami smernice
2014/53/EÚ.
Zákazníci si môžu stiahnuť kópiu pôvodného DoC na naše RE výrobky z
nášho servera DoC:
http://www.ptc.panasonic.eu
Kontakt na splnomocneného zástupcu:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Nemecko
Magyar
Megfelelőségi Nyilatkozat (DoC)
Ezennel a, “Panasonic Corporation” kijelenti, hogy a jelen termék kielégíti
az 2014/53/EU Irányelv létfontosságú követelményeit és más vonatkozó
rendelkezéseit.
A vásárlók letölthetik az RE termékek eredeti DoC másolatát a DoC
szerverünkről:
http://www.ptc.panasonic.eu
A hivatalos képviselő elérhetősége:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Németország
Ελληνικά
Δήλωση συμμόρφωσης (DoC)
H “Panasonic Corporation” δηλώνει ότι το προϊόν αυτό είναι
συμμορφωμένο προς τις βασικές απαιτήσεις και άλλες σχετικές διατάξεις
της Οδηγίας 2014/53/EΕ.
Οι πελάτες μπορούν να κατεβάσουν ένα αντίγραφο του πρωτοτύπου DoC
για τα RE προϊόντα μας από τον DoC server μας:
http://www.ptc.panasonic.eu
Επικοινωνήστε με τον Εξουσιοδοτημένο Αντιπροσωπό μας:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Γερμανία
Português
Declaração de Conformidade (DoC)
Com o presente documento, a “Panasonic Corporation” declara que este
produto se encontra em conformidade com os requisitos específicos e
demais especificações referentes à Diretiva 2014/53/UE.
Os clientes podem baixar uma cópia da declaração de conformidade
(DoC) para nossos produtos RE do Server DoC:
http://www.ptc.panasonic.eu
Contacto com um Representante Autorizado:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Alemanha
Eesti keel
Vastavusdeklaratsioon (DoC)
Käesolevaga kinnitab “Panasonic Corporation”, et see toode vastab
direktiivi 2014/53/EL olulistele nõuetele ja teistele asjakohastele sätetele.
Kliendid saavad koopia meie RE toodetele kehtiva
originaalvastavusdeklaratsiooni koopia alla laadida meie DoC-serveristt:
http://www.ptc.panasonic.eu
Võtke ühendust volitatud esindajaga:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Saksamaa
Norsk
Samsvarserklæring (DoC)
“Panasonic Corporation” erklærer herved at dette produktet samsvarer
med de grunnleggende kravene og andre relevante bestemmelser i
direktivet 2014/53/EU.
Kundene kan laste ned en kopi av den originale samsvarserklæringen
(DoC) for vårt RE utstyr fra vår DoC server:
http://www.ptc.panasonic.eu
Kontaktinformasjon autorisert representant:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Tyskland
Български
Декларация за съответствие (DoC)
С настоящото “Panasonic Corporation” декларира, че този продукт е в
съответствие с основните изисквания и други съответни разпоредби
на Директива 2014/53/EС.
Потребителите могат да свалят копие от оригиналните DoC към нашите
продуктите от типа RE от сървъра, на който се съхраняват DoC:
http://www.ptc.panasonic.eu
Свържете се с нашия упълномощен представител:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Германия
Român
Declaraţie de Conformitate (DoC)
“Panasonic Corporation” declară prin prezenta că acest produs este
conform cu cerinţele esenţiale şi alte prevederi relevante ale Directivei
2014/53/UE.
Clienţii pot descărca o copie a DoC-ului original al produselor noastre RE
de la adressa noastră DoC din Internet:
http://www.ptc.panasonic.eu
Contactaţi Reprezentantul Autorizat:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Germania
Hrvatski
Deklaracija o podobnosti (DoC)
Ovime „Panasonic Corporation” izjavljuje da ovaj proizvod udovoljava
osnovnim zahtjevima i ostalim relevantnim odredbama Direktive
2014/53/EU.
Kupci mogu preuzeti kopiju originalne DoC za naše RE proizvode s našeg
DoC poslužitelja:
http://www.ptc.panasonic.eu
Adresa ovlaštenog predstavništva:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Njemačka
Türkçe
Uygunluk Beyanı (DoC)
“Panasonic Corporation” bu belge ile bu ürünün 2014/53/EU Direkti’nin
temel gerekliliklerine ve diğer ilgili hükümlerine uygun olduğunu beyan
eder.
Müşterilerimiz RE ürünlerimizle ilgili orijinal DoC belgesinin bir kopyasını
DoC sunucumuzdan indirebilir:
http://www.ptc.panasonic.eu
Yetkili Temsilci ile temasa geçin:
Panasonic Marketing Europe GmbH, Panasonic Testing Centre,
Winsbergring 15, 22525 Hamburg, Almanya
Type of wireless Frequency band Maximum power
(dBm E.I.R.P.)
Bluetooth® 2402 – 2480 MHz 10 dBm
Bezvadu tips Frekvenču josla Maksimālā jauda
(dBm EIRP)
Bluetooth® 2402 – 2480 MHz 10 dBm
Bevielio ryšio tinklas Dažnių diapazonas Maksimali siuntimo
galia (dBm e.i.r.p.)
Bluetooth® 2402 – 2480 MHz 10 dBm
Vrsta brezžične
povezave Frekvenčni pas Največja moč
(dBm EIRP)
Bluetooth® 2402 – 2480 MHz 10 dBm
Typ bezdrôtového
pripojenia Frekvenčné pásmo Maximálny výkon
(dBm e.i.r.p.)
Bluetooth® 2402 – 2480 MHz 10 dBm
Wireless típus Frekvenciasáv Maximális teljesítmény
(dBm e.i.r.p.)
Bluetooth® 2402 – 2480 MHz 10 dBm
Τύπο ασύρματης Ζώνη συχνοτήτων Μέγιστη ισχύς
(dBm e.i.r.p.)
Bluetooth® 2402 – 2480 MHz 10 dBm
Tipo de ligação sem
fios Banda de frequência Potência máxima
(dBm e.i.r.p.)
Bluetooth® 2402 – 2480 MHz 10 dBm
Juhtmevaba seadme
tüüp Sagedusriba Maksimaalne võimsus
(dBm EIRP)
Bluetooth® 2402 – 2480 MHz 10 dBm
Type trådløs Frekvensbånd Maks. effekt
(dBm e.i.r.p.)
Bluetooth® 2402 – 2480 MHz 10 dBm
Вид безжична връзка Честотна лента Максимална мощност
(dBm e.i.r.p.)
Bluetooth® 2402 – 2480 MHz 10 dBm
Tip de wireless Interval de frecvenţă Putere maximă
(dBm e.i.r.p.)
Bluetooth® 2402 – 2480 MHz 10 dBm
Vrsta bežične mreže Frekvencijski pojas Maksimalna snaga
(dBm e.i.r.p.)
Bluetooth® 2402 – 2480 MHz 10 dBm
Kablosuz türü Frekans bandı Maksimum güç
(dBm e.i.r.p.)
Bluetooth® 2402 – 2480 MHz 10 dBm
About Bluetooth
®
Frequency band
• This system uses the 2.4 GHz frequency band.
Certification
• This system conforms to the frequency restrictions and has received
certification based on frequency laws. Thus, a wireless permit is not
necessary.
• The actions below are punishable by law in some countries:
– Taking apart or modifying the main unit.
– Removing specification indications.
Restrictions of use
• Wireless transmission and/or usage with all Bluetooth
® equipped
devices is not guaranteed.
• All devices must conform to standards set by the Bluetooth SIG, Inc.
• Depending on the specifications and settings of a device, it can fail to
connect or some operations can be different.
• This system supports Bluetooth
® security features. But depending on
the operating environment and/or settings, this security is possibly not
sufficient. Transmit data wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth
® device.
Range of use
• Use this device at a maximum range of 10 m.
• The range can decrease depending on the environment, obstacles or
interference.
Interference from other devices
• This system may not function properly and troubles such as noise and
sound jumps may arise due to radio wave interference if this unit is
located too close to other Bluetooth
® devices or the devices that use the
2.4 GHz band.
• This system may not function properly if radio waves from a nearby
broadcasting station, etc. is too strong.
Intended usage
• This system is for normal, general use only.
• Do not use this system near an equipment or in an environment that is
sensitive to radio frequency interference (example: airports, hospitals,
laboratories, etc.).
Licenses
Specifications
█
General
Dimensions (W x H x D) 400 mm x 142 mm x 250 mm
Mass (SA-AKX520) 2.5 kg
Mass (SA-AKX320) 2.5 kg
Operating temperature range 0°C to +40°C
Operating humidity range 35% to 80% RH (no condensation)
█
Amplifier section
RMS output power stereo mode
[AKX520]
Front Ch (both ch driven) 325 W per channel (3 Ω), 1 kHz, 30% THD
Total RMS stereo mode power 650 W
[AKX320]
Front Ch (both ch driven) 225 W per channel (4 Ω), 1 kHz, 30% THD
Total RMS stereo mode power 450 W
█
Tuner section
Frequency modulation (FM)
Preset memory 30 stations
Frequency range 87.50 MHz to 108.00 MHz (50 kHz step)
Antenna terminals 75 Ω (unbalanced)
Amplitude modulation (AM)
Preset memory 15 stations
Frequency range 522 kHz to 1629 kHz (9 kHz step)
520 kHz to 1630 kHz (10 kHz step)
█
Disc section
Disc played (8 cm or 12 cm) CD, CD-R/RW (CD-DA, MP3 )
MPEG-1 Layer 3, MPEG-2 Layer 3
Pick up
Wavelength 790 nm (CD)
NORSK
Bølgelengde 790 nm (CD)
Laserstyrke Ingen farlig stråling sendes ut
█
Terminal section
USB port
USB standard USB 2.0 full speed
Media file format support MP3 (*.mp3)
USB device file system FAT12, FAT16, FAT32
AUX IN
Audio input Pin jack (1 system)
[AKX520]
Microphone
Terminal Mono, 6.3 mm jack (2 system)
█
Bluetooth
®
section
Version Bluetooth
® Ver. 4.2
Class Class 2
Supported profiles A2DP, AVRCP, SPP
Frequency band 2.4 GHz band FH-SS
Operating frequency 2402 MHz to 2480 MHz
Maximum power (EIRP) 10 dBm
Operation distance 10 m line of sight
Supported codec SBC
█
Speaker section
[SB-AKX440]
Speaker unit(s)
Woofer 20 cm cone type x 1
Tweeter 6 cm cone type x 1
Impedance 3 Ω
Dimensions (W x H x D) 257 mm x 422 mm x 219 mm
Mass 4.5 kg
[SB-AKX220]
Speaker unit(s)
Woofer 16 cm cone type x 1
Tweeter 6 cm cone type x 1
Impedance 4 Ω
Dimensions (W x H x D) 199 mm x 333 mm x 210 mm
Mass 3.3 kg
Note:
• Specifications are subject to change without notice.
Mass and dimensions are approximate.
• Total harmonic distortion is measured by the digital spectrum analyser.
█
Note on disc
• This system can play CD-R/RW with CD-DA or MP3 format content.
• Before playback, finalise the disc on the device it was recorded on.
• Some CD-R/RW cannot be played because of the condition of the
recording.
█
Note on USB device
• This system does not guarantee connection with all USB devices.
• This system supports USB 2.0 full speed.
• This system can support USB devices of up to 32 GB.
• Only FAT 12/16/32 file system is supported.
█
Note on MP3 file
• Files are defined as tracks and folders are defined as albums.
• Tracks must have the extension “.mp3” or “.MP3”.
• Tracks will not necessarily be played in the order you recorded them.
• Some files can fail to work because of the sector size.
MP3 file on disc
• This system can access up to:
– 255 albums (including root folder)
– 999 tracks
– 20 sessions
• Disc must conform to ISO9660 level 1 or 2 (except for extended
formats).
MP3 file on USB device
• This system can access up to:
– 800 albums (including root folder)
– 8000 tracks
– 999 tracks in one album
Sales and Support Information
For the United Kingdom and Ireland
Customer Communications Centre
• For customers within the UK: 0344 844 3899
• For customers within Ireland: 01 289 8333
• Monday – Friday 9:00am – 5:00pm (Excluding public holidays).
• For further support on your product, please visit our website:
www.panasonic.co.uk
Direct Sales at Panasonic UK
• Order accessory and consumable items for your product with ease and
confidence by phoning our Customer Communications Centre
Monday – Friday 9:00am – 5:00pm (Excluding public holidays).
• Or go on line through our Internet Accessory ordering application at
www.pas-europe.com.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are provided directly
by Panasonic UK.
• It couldn’t be simpler!
• Also available through our Internet is direct shopping for a wide range of
finished products. Take a browse on our website for further details.
Supplied accessories
Check and identify the supplied accessories.
Product numbers correct as of January 2019. These may be subject to
change.
For Australia and New Zealand
1 AC mains lead
For others
2 AC mains leads
For the United Kingdom and Ireland
(K2CT2YY00089)
1 AM loop antenna
(N1DYYYY00011)
[AKX520]
2 Ferrite cores
(J0KG00000071)
1 FM indoor antenna
(RSAX0002)
1 Remote control
(N2QAYB001215)
1 Remote control battery
For the United Kingdom and Ireland
1 Antenna plug adaptor
(K1YZ02000013)
Note:
Use the AC mains lead that is suitable for your household mains socket.
Preparing the remote control
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with those in the remote
control.
Placement of speakers
The left and right speakers are the same.
[AKX520]
[AKX320]
Use only the supplied speakers.
You can cause damage to the system and decrease the sound quality if
you use other speakers.
Note:
• Keep your speakers more than 10 mm from the main unit for ventilation.
• Put the speakers on a flat safe surface.
• These speakers do not have magnetic shielding. Do not put them near TVs,
PCs or other equipment easily influenced by magnetism.
• When you play at high levels for a long period, it can cause damage to the
speakers and decrease the life of the speakers.
• Decrease the volume in these conditions to prevent damage:
– When the sound is distorted.
– When you adjust the sound quality.
Panasonic bears no responsibility for data and/or information that is
compromised during a wireless transmission.
The Bluetooth
® word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by Panasonic
Corporation is under license. Other trademarks and trade names are
those of their respective owners.
Android and Google Play are trademarks of Google LLC.
Power supply AC 220 V to 240 V, 50 Hz
Power consumption
[AKX520] 86 W
[AKX320] 60 W
Power consumption in standby mode (approximate)
With “BLUETOOTH STANDBY” set to “OFF” 0.5 W
With “BLUETOOTH STANDBY” set to “ON” 0.6 W
CAUTION!
•Use the speakers only with the recommended system. If not, you
can cause damage to the amplifier and speakers and can cause a
fire. Consult an approved service personnel if damage occurs or
if there is a sudden apparent change in performance.
•Do not modify the speaker or speaker wires as this can cause
damage to the system.
•Do the procedures included in these instructions when you
attach the speakers.
•Do not touch the speaker cone’s reverberating surfaces:
– This may damage the speaker cone.
– The speaker cone may be hot.
Making the connections
Connect the AC mains lead only after all the other connections have been made.
1Connect the AM loop antenna.
Stand the antenna up on its base until it clicks.
2Connect the FM indoor antenna.
Put the antenna where reception is best.
3Connect the speakers.
Connect the speaker cables to the corresponding terminal.
4Connect the AC mains lead.
Do not use any other AC mains leads except the supplied one.
Conserving power
The system consumes a small amount of power even when it is in
standby mode. Disconnect the power supply if you do not use the
system.
Some settings will be lost after you disconnect the system. You have
to set them again.
Note:
Keep the antennas away from the speaker cables and the AC mains lead to
avoid picking up noise.
For the United Kingdom and Ireland
Connect the FM outdoor antenna.
Use an outdoor antenna if reception is poor.
CAUTION!
Keep the antenna plug adaptor out of reach of children to prevent
swallowing.
Note:
• Do not use the outdoor antenna during a lightning storm.
• Disconnect the outdoor antenna if you do not use the system.
Adhesive tape
(not supplied)
75 coaxial cable ȍ
(not supplied)
FM outdoor antenna
(not supplied)
Antenna plug adaptor
[AKX520]
Attaching the ferrite core
APull on the tab to open.
BPut the speaker cables onto one of the
concave surfaces. Make sure the ferrite core
is at about 5 cm away from the end of the
speaker cables.
CCoil the speaker cables around the ferrite
core and onto the other concave surface.
DClose the ferrite core until it clicks.
Note:
Failure to attach the ferrite core to the speaker
cables may result in poor radio reception.
(For the AC mains plug of three pins)
READ THE “Caution for AC mains lead” BEFORE CONNECTION.
5 cm
To household
mains socket
For Australia
1. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product, without charge for parts or
labour, if in the opinion of Panasonic the product is found to have a manufacturing defect within one (1) year or (12 months) (the “warranty period”) from the
date of purchase appearing on your purchase receipt.
2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia, it’s Authorised Distributors, or Dealers, and only
where the products are used and serviced within Australia or its territories. Warranty cover only applies to the services that are carried out by a Panasonic
Authorised Service Centre and only if valid proof of purchase is presented when the warranty service is requested.
3. This warranty only applies if the product has been installed and/or used in accordance with the manufacturer’s recommendations (as noted in the operating
instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty does not cover damage, malfunction or failure resulting from
use of incorrect voltages, incorrect installation, accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply
problems, thunderstorm activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including unauthorised alterations), exposure to
abnormally corrosive conditions, or any foreign object or matter having entered the product.
4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase:
(a) Consumable parts
(b) Cosmetic parts
(c) Worn or damaged parts
(d) Information stored on Hard Disk Drives, Optical Discs, USB Devices, SD Cards, Tapes
(e) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s)
5.
Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will not cover:
(a) Internet and or DLNA connection / setup related problems
(b) Access fees and or charges incurred for internet connection
(c) Incompatible software or software not specifically stipulated in the product operations manual; and
(d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the internet or any other device.
6. To claim warranty service, when required, you should:
• Contact Panasonic’s Customer Care Centre on 132 600 for Service Centre information.
• Confirm the opening and acceptance times with the Authorised Service Centre that you choose.
• Then send or take the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt.
• Any freight and insurance costs associated with the transport of the product to and/or from your nearest Authorised Service Centre must be arranged and
paid for by you.
7. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or re-installation of a product, including
costs related to the mounting, de-mounting or remounting of any screen, (and any other ancillary activities), delivery, handling, freighting, transportation or
insurance of the product or any part thereof or replacement of and do not extend to, and exclude, any damage or loss occurring by reason of, during,
associated with, or related to such installation, de-installation, re-installation or transit.
Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however, coverage will vary dependant on
product. For advice on exact Authorised Service Centre locations for your product, please telephone our Customer Care Centre on 132 600 or visit our website and
use the Service Centre Locator.
In addition to your rights under this warranty, Panasonic products come with consumer guarantees that cannot be excluded under the Australian Consumer Law. If
there is a major failure with the product, you can reject the product and elect to have a refund or to have the product replaced or if you wish you may elect to keep
the goods and be compensated for the drop in value of the goods. You are also entitled to have the product repaired or replaced if the product fails to be of
acceptable quality and the failure does not amount to a major failure.
If there is a major failure in regard to the product which cannot be remedied then you must notify us within a reasonable period by contacting the Panasonic
Customer Care Centre. If the failure in the product is not a major failure then Panasonic may choose to repair or replace the product and will do so in a reasonable
period of time from receiving notice from you.
If you require assistance regarding warranty conditions or any other enquiries, please visit the
Panasonic Australia www.panasonic.com.au website or contact by phone on 132 600
If phoning in, please ensure you have your operating instructions available.
Panasonic Warranty
THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)
SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
Panasonic Australia Pty. Limited
ACN 001 592 187 ABN 83 001 592 187
1 Innovation Road, Macquarie Park NSW 2113
www.panasonic.com.au
PRO-031-F11 Issue: 5.0 23-01-2018
Overview of controls
Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.
AStandby/on switch [`], [ ]1
Press to switch the unit from on to standby mode or vice versa. In
standby mode, the unit is still consuming a small amount of power.
BDecrease the brightness of the display panel
To cancel, press the button again.
[AKX520]
The illumination effect is also switched off.
CSelect the audio source
Press [SELECT <, >] (main unit: [SELECT]) repeatedly to select the
source:
On the main unit:
To start Bluetooth® pairing, press and hold [ ].
DBasic playback control
EView the setup menu
FView the content information
GSelect or confirm the option
HSet the sleep timer
IAdjust the volume level
On the main unit:
Press [VOL] and then turn [VOLUME/MULTI CONTROL] to adjust the
volume.
[AKX520]
Adjust the microphone volume level
Press and hold [–MIC VOL] until “MIC VOL” is shown.
Turn [VOLUME/MULTI CONTROL] to adjust the volume.
JMute the sound
To cancel, press the button again.
“MUTE” is also cancelled when you adjust the volume or when you
switch off the system.
KView the play menu
LSelect the sound effects
MOpen or close the disc tray
NSelect MP3 album or track
Press [ALBUM/TRACK] to select album or track.
Browse tracks or albums
Turn [VOLUME/MULTI CONTROL] to browse.
To start playback from the selection, press [4 9/ ].
ODJ function direct buttons
Press [DJ] to switch on the DJ function.
Press [DJ1] to [DJ6] to select the desired function.
To cancel, press the selected [DJ1] to [DJ6] again.
PDisc tray
Q[AKX520]
Microphone jack
RVolume or multi control knob
SRemote control sensor
Distance: Within approximately 7 m
Angle: Approximately 10° up and 30° down, 30° left and right
TDisplay panel
UUSB port ( )
USB status indicator
V[AKX520]
Select the Karaoke effects
To cancel, press and hold [–OFF] until “OFF EFFECT” is shown.
WSelect DJ jukebox
X[AKX520]
Select the illumination effects
Preparing media
Disc
1Press [x] to open the disc tray.
Put in a disc with the label facing up.
Press again to close the disc tray.
2Press [SELECT <, >] repeatedly to select “CD”.
USB
Preparation
Before you connect a USB device to the system, make sure you do a backup of the data.
1Decrease the volume and connect the USB device to the USB port.
Hold the main unit when connecting or disconnecting the USB device.
2Press [SELECT <, >] repeatedly to select “USB A” or “USB B”.
USB status indicator lights up in red when selected.
Note:
• Do not use a USB extension cable. The system cannot recognise USB device connected through a cable.
• Some devices cannot be charged as the maximum USB charging current is 0.5 A only.
Bluetooth
®
You can connect and play an audio device wirelessly through Bluetooth
®.
Preparation
• Switch on the main unit.
• Switch on the Bluetooth® feature of the device and r the system.put the device nea
• Read the operating instructions of the device for details.
█
Pairing a device
1Press [ ].
If “PAIRING” is shown, continue with step 3.
2Press [PLAY MENU] to select “PAIRING” and then press [OK].
3Select “SC-AKX520” or “SC-AKX320” from the Bluetooth
® menu
of the device.
If prompted for a passkey, input “0000” or “1234”.
The device connects with this system automatically after pairing is
complete.
The MAC address (example: 6C:5A:B5:B3:1D:0F) may be shown
before “SC-AKX520” or “SC-AKX320” is shown.
The name of the connected device is shown for a few seconds.
Using the main unit
1Press and hold [ ] until “PAIRING” is shown.
2Select “SC-AKX520” or “SC-AKX320” from the Bluetooth
® menu
of the device.
Note:
• You can pair up to 8 devices with this system. If a 9th device is paired, the
device that has not been used for the longest time will be replaced.
• Depending on the searching functionality of the Bluetooth® device and the
surrounding environment, if the product name is not shown on the Bluetooth
®
menu of the device, switch off and then switch on the Bluetooth
® feature of
the device repeatedly during the pairing process.
█
Connecting a device
1Press [ ].
“BLUETOOTH READY” is shown.
2Select “SC-AKX520” or “SC-AKX320” from the Bluetooth
® menu
of the device.
The name of the connected device is shown for a few seconds.
3Start playback on the device.
Note:
• A device must be paired to connect.
• When “BLUETOOTH” is selected as the source, this system will automatically
try to connect to the last connected device. (“LINKING” is shown during this
process.)
█
Multi Connect
[AKX520]
This system supports Multi Connect, which can connect up to 3 devices
simultaneously.
To switch between the connected devices
When one of the connected devices is playing, you can easily switch
control to another connected device simply by starting a playback on that
device. The previous playback will be paused automatically.
Note:
This function may not work for some apps or devices (depending on app or
device specifications).
█
Disconnecting a device
While a Bluetooth
® device is connected
1Press [PLAY MENU] repeatedly to select “DISCONNECT?”.
2Press [R T, ] to select “OK? YES” and then press [OK].
“BLUETOOTH READY” is shown.
To cancel, select “OK? NO”.
Note:
•[AKX520]
This function disconnects all connected devices.
• A device is disconnected when you:
– Select a different source.
– Move the device out of the maximum range.
– Disable the Bluetooth
® transmission of the device.
– Switch off the system or the device.
USB A USB B CD
AUXBLUETOOTH AM
FM
[AKX320]
Preparation
If this system is connected to a Bluetooth
® device, disconnect it
(~“Disconnecting a device”).
[AKX320]
Preparation
If this system is connected to a Bluetooth
® device, disconnect it
(~“Disconnecting a device”).
[AKX320]
Using the main unit
Press and hold [ ] until “PAIRING” is shown.
Media playback
The following marks indicate the availability of the feature.
Basic playback
BLUETOOTH CD USB
Note:
Depending on the Bluetooth® device, some operations may not work.
Viewing available information
BLUETOOTH CD USB
You can view the available information, such as MP3 album and track
number, on the display panel.
Press [DISPLAY] repeatedly.
Example: MP3 album and track number display.
Note:
• Maximum characters that can be shown: Approximately 32
• This system supports ver. 1.0, 1.1 and 2.3 ID3 tags.
• Text data that the system does not support can show differently.
Play menu
CD USB
1 CD
Press [PLAY MENU].
USB
Press [PLAY MENU] repeatedly to select “PLAYMODE”.
2Press [R T, ] to select the setting and then press [OK].
Note:
• During random playback, you cannot skip to tracks which have been played.
• The setting is cancelled when you open the disc tray or disconnect the USB
device.
Link mode
BLUETOOTH
You can change the link mode to suit the connection type.
Preparation
If this system is connected to a Bluetooth
® device, disconnect it
(~“Disconnecting a device”).
1Press [PLAY MENU] repeatedly to select “LINK MODE”.
2Press [R T, ] to select the mode and then press [OK].
Note:
• When enjoying video contents with this function, the video and audio output
may not be synchronised. In this case, select “MODE 1”.
• Select “MODE 1” if the sound is interrupted.
Radio
Preparation
Press [SELECT <, >] repeatedly to select “FM” or “AM”.
Manual tuning
1Press [PLAY MENU] repeatedly to select “TUNE MODE”.
Or press [
8
] on the main unit to select “MANUAL”. Continue with step 3.
2Press [R T, ] to select “MANUAL” and then press [OK].
3Press [2 3/ ] or [5 6/ ] to tune in to the station.
To tune automatically, press and hold the button until the frequency
starts changing quickly.
“STEREO” is shown when a stereo broadcast is being received.
Memory presetting
You can preset up to 30 FM stations and 15 AM stations.
█
Automatic presetting
1Press [PLAY MENU] to select “A.PRESET”.
2Press [R T, ] to select “LOWEST” or “CURRENT” and then press
[OK].
The tuner presets all the stations it can receive into the channels in
ascending order.
To cancel, press [8].
█
Manual presetting
1Press [PLAY MENU] repeatedly to select “TUNE MODE”.
Or press [
8
] on the main unit to select “MANUAL”. Continue with step 3.
2Press [R T, ] to select “MANUAL” and then press [OK].
3Press [2 3/ ] or [5 6/ ] to tune in to the station.
4Press [OK].
5Press [ ] to select a preset number and then press [OK].R T,
Do steps 3 through 5 again to preset more stations.
The new station replaces any station that occupies the same preset
number.
█
Selecting a preset station
1Press [PLAY MENU] repeatedly to select “TUNE MODE”.
Or press [8] on the main unit to select “PRESET”. Continue with step 3.
2Press [R T, ] to select “PRESET” and then press [OK].
3Press [2 3/ ] or [5 6/ ] to select the preset station.
Improving the sound quality
When “FM” is selected
1Press [PLAY MENU] repeatedly to select “FM MODE”.
2Press [ ] to select “MONO” and then press [OK].R T,
To cancel, select “STEREO”.
“MONO” is also cancelled when you change the frequency.
To memorise the setting
Continue with step 4 of “Manual presetting” (~above).
When “AM” is selected
1Press [PLAY MENU] repeatedly to select “B.PROOF”.
2Press [R T, ] to select the setting that provides the best
reception and then press [OK].
Checking the signal status
When “FM” is selected
For Australia and New Zealand
Press [DISPLAY].
Except for Australia and New Zealand
Press [DISPLAY] to select “FM STATUS”.
RDS broadcasting
Except for Australia and New Zealand
This system can show the text data transmitted by the radio data system
(RDS) available in some areas.
When “FM” is selected
Press [DISPLAY] repeatedly.
Note:
RDS may not be available if reception is poor.
AM allocation setting
This system can also receive AM broadcasts allocated in 10 kHz steps.
When “AM” is selected
Press and hold [4 9/ ] on the main unit.
After a few seconds, the display panel shows the current minimum radio
frequency. Release the button when the minimum frequency changes.
• To go back to the initial setting, do the above steps again.
• Preset frequencies are erased after you change the setting.
Sound effects
1Press [SOUND] repeatedly to select the effect.
2Press [ ] to select the setting and then press [OK].R T,
Or turn [VOLUME/MULTI CONTROL] to select the setting.
CD :
USB :
BLUETOOTH :
CD-R/RW in CD-DA format or with MP3 files.
USB device with MP3 files.
Bluetooth® device.
Play Press [4 9/ ].
Stop Press [8].
USB
The position is memorised.
“RESUME” is shown.
Press again to stop fully.
Pause Press [ /4 9].
Press again to continue playback.
Skip Press [2 3/ ] or [5 6/ ] to skip track.
CD USB
Press [R T, ] to skip MP3 album.
Search Press and hold [2 3/ ] or [5 6/ ].
OFF PLAYMODE Cancel the setting.
1-TRACK
1 Play one selected track.
Press [ ] to select the track.2 3/ ] or [5 6/
1-ALBUM
1 Play one selected MP3 album.
Press [R T, ] to select the MP3 album.
RANDOM
RND
Play all tracks randomly.
1-ALBUM RANDOM
1 RND
Play all tracks in one selected MP3 album
randomly.
Press [R T, ] to select the MP3 album.
ALL REPEAT Repeat all tracks.
1-TRACK REPEAT
1
Repeat 1-TRACK.
1-ALBUM REPEAT
1
Repeat 1-ALBUM.
RANDOM REPEAT
RND Repeat random playback.
1-ALBUM
RANDOM REPEAT
1 RND
Repeat 1-ALBUM RANDOM.
MODE 1 Emphasis on connectivity.
MODE 2 (default) Emphasis on sound quality.
Album
number Track
number
LOWEST Tuning begins from the lowest frequency.
CURRENT Tuning begins from the current frequency.
FM – – – – The FM signal is weak.
The system is not tuned in to a station.
FM ST The FM signal is in stereo.
FM MONO “MONO” is selected as the “FM MODE”. The FM signal is
in monaural.
FREQ Frequency
PS Programme service
PTY Programme type
PRESET EQ “ROCK”, “POP”, “AFRO BEAT”, “ARABIC”,
“PERSIAN”, “INDIA BASS”, “DANGDUT”,
“MALAY POP”, “ELECTRONICA”,
“REGGAETON”, “SALSA”, “SAMBA”,
“FOOTBALL”, “KARAOKE” or “FLAT”.[AKX520]
BASS/MID/TREBLE –4 to +4
Note:
These settings can change when you select a
PRESET EQ setting.
SURROUND “ON SURROUND” or “OFF SURROUND”
D.BASS LEVEL “OFF”, “LEVEL 1” to “LEVEL 6”
D.BASS BEAT “ON D.BASS BEAT” or “OFF D.BASS BEAT”
Note:
• This function emphasises the attack level of the
drumbeat and produces a punchy sound.
Depending on the track, the effect may be small.
• This function does not work when “D.BASS LEVEL”
is set to “OFF”.
Illumination effects
[AKX520]
You can change the illumination effect on the system.
Press [SETUP] repeatedly to select “ILLUMINATION” and then press
[ , R T] to select the effect.
Or press [ILLUMINATION] repeatedly to select the effect.
You can also turn [VOLUME/MULTI CONTROL] to select the next or
previous effect.
Note:
When the dimmer function is switched on, the illumination on the system will
remain off even when you switch on the illumination function.
DJ functions
You can use the DJ functions to add sound effects between songs.
DJ jukebox
USB
You can use the DJ jukebox function to add cross-fade effect between
songs.
1Press [PLAY MENU] to select “JUKEBOX”.
2Press [ ] to select the setting and then press [OK].R T,
Using the main unit
Press [JUKEBOX] repeatedly to select the setting.
Note:
• The system switches to repeat mode automatically when you switch on DJ
jukebox.
• DJ jukebox is switched off when you switch off the system or change to
another source.
• The cross-fade function may not work between songs that have different
sampling frequencies.
█
Changing the repeat setting
1Press [PLAY MENU] repeatedly to select “PLAYMODE”.
2Press [ ] to select the setting and then press [OK].R T,
DJ effect
(Except for AUX source)
By main unit only
You can use the DJ effect function to add sound effects.
1Press [DJ] to select “DJ EFFECT SELECT NUMBER” or “ON DJ
EFFECT”.
To cancel, select “OFF EFFECT”.
2Press [DJ1] to [DJ6] to select the effect.
To cancel, press the button again.
3Turn [VOLUME/MULTI CONTROL] to select the setting.
Note:
DJ effect is switched off when you switch off the system or change to AUX source.
Using a microphone
[AKX520]
Preparation
Decrease the volume of the system to its minimum before you connect or
disconnect a microphone.
1Connect a microphone (not supplied) to the microphone jack.
Plug type: Ø 6.3 mm monaural
2Press [SOUND] repeatedly to select “MIC VOL”.
Or press and hold [–MIC VOL] until “MIC VOL” is shown.
3Press [R T, ] to adjust the volume of the microphone and then
press [OK].
Or turn [VOLUME/MULTI CONTROL] to adjust the volume of the
microphone.
4If you want to sing with the background music, play the music
source and adjust the volume of the system.
Note:
• If a strange noise (howling) is emitted, move the microphone away from the
speakers, or decrease the volume of the microphone.
• When you do not use the microphone, disconnect it from the microphone
jack, and decrease the volume of the microphone to its minimum.
Karaoke
[AKX520]
Preparation
Select the music source.
Note:
The Karaoke function is switched off when you switch off the system.
Karaoke effect
You can use the Karaoke effect function to add sound effects.
1Press [SOUND] repeatedly to select “KARAOKE EFFECT” and
then press [ ] to select the effect.R T,
Or press [KARAOKE] repeatedly to select the effect.
To check the current setting, press [OK].
2Press [ ] or [2 3/5 6/ ] to select the setting and then
press [OK].
Or turn [VOLUME/MULTI CONTROL] to select the setting.
Note:
To use Karaoke effect in AUX source, set “AUX MODE” to “MODE 1”
( “AUX mode”).~
Clock and timers
Setting the clock
This is a 24-hour clock.
1Press [SETUP] to select “CLOCK”.
2Press [R T, ] to set the time and then press [OK].
To check the time
Press [SETUP] to select “CLOCK” and then press [OK].
In standby mode, press [DISPLAY].
Note:
Reset the clock regularly to maintain accuracy.
Sleep timer
The sleep timer switches off the system after the set time.
Press [SLEEP] repeatedly to select the setting (in minutes).
To cancel, select “OFF”.
To check the remaining time
Press [SLEEP].
Note:
• The remaining time is shown for a few seconds every minute. “SLEEP 1” is
always shown when only 1 minute remains.
• The sleep timer always comes first. Be sure not to set an overlap of timers.
Play timer
(Except for Bluetooth
® and AUX source)
You can set the timer to come on at a certain time to wake you up.
Preparation
Set the clock.
1Press [SETUP] repeatedly to select “TIMER ADJ”.
2Press [R T, ] to set the start time and then press [OK].
3Do step 2 again to set the end time.
4Press [R T, ] to select the source you want to play and then
press [OK].
To start the timer
1Prepare the source you want to listen to (disc, USB or radio) and
set the volume.
2Press [SETUP] repeatedly to select “TIMER SET”.
3Press [R T, ] to select “PLAY ON” and then press [OK].
“#” is shown.
To cancel, select “PLAY OFF”.
The system must be switched off for the timer to operate.
To check the setting
Press [SETUP] repeatedly to select “TIMER ADJ” and then press
[OK].
In standby mode, press [DISPLAY] two times.
Note:
• The timer starts at a low volume and increases gradually to the preset level.
• The timer comes on at the set time every day if the timer is on.
• If you switch off the system and then switch on again while a timer is in
operation, the timer will not stop at the end time.
COLOR A selection of 3 different illumination colours on the main unit.
AUTO Illuminate in 3 different colours and change alternately.
OFF Cancel the effect.
Using the “Panasonic MAX Juke” app
You can download and install the free Android™ app “Panasonic MAX
Juke” on Google Play™ for additional features, such as to request song
playback from multiple devices simultaneously. You can also call up the
tracks you want to play through the app. For details on the app, refer to
the site below.
http://av.jpn.support.panasonic.com/support/global/cs/audio/app/
(This site is in English only.)
OFF CROSSFADE Cancel cross-fading.
ON CROSSFADE Add cross-fading.
OFF Switch off DJ jukebox.
RANDOM REPEAT
RND Repeat random playback.
ALL TITLE REPEAT Repeat all tracks.
[DJ1] PHASER
Add space and dimension to the sound.
[DJ2] FILTER
Enhance or filter specific ranges of the sound.
[DJ3] SOUND CHOPPER
Cut off the sound periodically.
[DJ4] ELECTRO ECHO
Add digital echo to the sound.
[DJ5] PITCH SHIFTER
Adjust the keys of the sound.
[DJ6] HARMONIZER
Add notes to the sound to create harmony.
VOCAL CANCEL Reduce the vocal level or change the audio
mode (depending on the source).
ECHO Add an echo effect to the sound.
KEY CONTROL Change the key of a song.
Note:
The setting is cancelled when you change to another
source.
TEMPO CD USB
Change the speed of a song.
BGM Change the background music level.
MIC EQ Select a MIC EQ mode.
OFF EFFECT Cancel the effect.
Press [OK] to confirm.
Or press and hold [–OFF] until “OFF EFFECT” is
shown.
VOCAL CANCEL “OFF”, 1 to 3, “L”, “R”, “L+R”
When using stereo source not formatted for
Karaoke
It is recommended to use “2 VOCAL CANCEL”
for most songs.
When using Karaoke formatted source
L: Only left channel sound (accompaniment only)
R: Only right channel sound (vocals only)
L+R: Left and right channel sounds are mixed
ECHO “OFF”, 1 to 4
KEY CONTROL –6 to +6
TEMPO “OFF”, –2 to +2
BGM “OFF”, 1 to 3
MIC EQ “SINGING” or “SPEECH”
SLEEP 30 SLEEP 60 SLEEP 90 SLEEP120
OFF
External equipment
You can connect a VCR, DVD player etc., and listen to the audio through
this system.
Preparation
• Disconnect the AC mains lead.
• Switch off all equipment and read the appropriate operating instructions.
1Connect the external equipment.
2Press [SELECT <, >] repeatedly to select “AUX”.
3Play the external equipment.
Note:
• Do not bend cables at sharp angles.
• Components and cables are sold separately.
• Sound distortion can occur when you use an adaptor.
• If you want to connect equipment other than those described, refer to the
audio dealer.
AUX mode
[AKX520]
1Press [PLAY MENU] to select “AUX MODE”.
2Press [R T, ] to select the mode and then press [OK].
Others
Auto off
This system automatically switches off when you do not use it for
approximately 20 minutes.
1Press [SETUP] repeatedly to select “AUTO OFF”.
2Press [R T, ] to select “ON” and then press [OK].
To cancel, select “OFF”.
Note:
• This function does not work when you are in radio source or when a
Bluetooth® device is connected.
•[AKX520]
This function may not work when a microphone is connected.
Bluetooth
®
standby
This function automatically switches on the system when you establish a
Bluetooth® connection from a paired device.
1Press [SETUP] repeatedly to select “BLUETOOTH STANDBY”.
2Press [R T, ] to select “ON” and then press [OK].
To cancel, select “OFF”.
Note:
Some devices may take longer to respond. If you are connected to a Bluetooth
®
device before switching off the system, wait for a minimum of 5 seconds before
connecting to this system from your Bluetooth® device again.
Software update
Occasionally, Panasonic may release updated software for this unit that
may add or improve the way a feature operates. These updates are
available free of charge. For more details, refer to the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
█
Checking the software version
1Press [SETUP] repeatedly to select “SW VER.” and then press
[OK].
The software version is shown.
2Press [OK] again to exit.
Troubleshooting
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated do not solve the
problem, consult your dealer for instructions.
█
Common problems
The unit does not work.
• The safety device has been activated. Do the following:
1. Press [ ] on the main unit to switch the unit to standby mode. If the unit 1
does not switch to standby mode, disconnect the AC mains lead and then
connect it again.
2. Press [ ] again to switch on the unit. If the problem persists, consult your 1
dealer.
The display panel lights up and changes continuously in standby mode.
• Press and hold [ ] on the main unit until “DEMO OFF” or “SDEMO OFF” is 8
shown.
No operations can be done with the remote control.
• Examine that the battery is installed correctly.
Sound is distorted or no sound.
• Adjust the volume of the system.
• Switch off the system, determine and correct the cause, and then switch on
again. It can be caused by straining of the speakers through excessive
volume or power, and when using the system in a hot environment.
A humming sound can be heard during playback.
• An AC mains lead or fluorescent light is near the cables. Keep other
appliances and cords away from the cables of this system.
The sound level reduces.
• The protection circuit has been activated due to the continuous use at high
volume output. This is to protect the system and maintain the sound quality.
█
Disc
Display not shown correctly.
Playback does not start.
• You have not put in the disc correctly. Put it in correctly.
• Disc is dirty. Clean the disc.
• Replace the disc if it is scratched, warped, or non-standard.
• There is condensation. Let the system dry for 1 to 2 hours.
The total number of tracks shown is incorrect.
The disc cannot be read.
Distorted sound is heard.
• You put in a disc that the system cannot play. Change to a playable disc.
• You put in a disc that has not been finalised.
█
USB
The USB device or the contents in it cannot be read.
• The format of the USB device or the contents in it are not compatible with the
system.
• USB devices with storage capacity of more than 32 GB cannot work in some
conditions.
Slow operation of the USB device.
• Large content size or large memory USB device takes longer time to read.
█
Bluetooth
®
Pairing cannot be done.
• Check the Bluetooth® device condition.
• The device is out of the 10 m communication range. Move the device nearer
to the system.
The device cannot be connected.
• The pairing of the device was unsuccessful. Do pairing again ( “Pairing a ~
device”).
• The pairing of the device has been replaced. Do pairing again ( “Pairing a ~
device”).
• This system might be connected to a different device. Disconnect the other
device and try connecting the device again.
• The system may have a problem. Switch off the system and then switch on
again.
• If “MODE 2” is selected in “LINK MODE”, select “MODE 1” ( “Link mode”).~
The device is connected but audio cannot be heard through the system.
• For some built-in Bluetooth® devices, you have to set the audio output to
“SC-AKX520” or “SC-AKX320” manually. Read the operating instructions of
the device for details.
Playback during Multi Connect is not working or no sound.
• Restart the app of the device.
• The control of the device was not switched successfully. Disconnect the
existing connected devices and try again.
Sound from the device is interrupted.
• The device is out of the 10 m communication range. Move the device nearer
to the system.
• Remove any obstacle between the system and the device.
• Other devices that use the 2.4 GHz frequency band (wireless router,
microwaves, cordless phones, etc.) are interfering. Move the device nearer to
the system and distance it from the other devices.
• Select “MODE 1” for stable communication ( “Link mode”).~
█
Radio
Sound is distorted.
• Use an optional FM outdoor antenna. The antenna should be installed by a
competent technician.
A beat sound is heard.
• Switch off the TV or move it away from the system.
• Move mobile telephones away from the system if the interference is apparent.
• When in AM tuner mode, select the “B.PROOF” setting that provides the best
reception.
A low hum is heard during AM broadcasts.
• Move the antenna away from other cables and cords.
█
AUX
Playback image and sound are not synchronised.
• Set “AUX MODE” to “MODE 2”.
Karaoke effect cannot be used.
• Set “AUX MODE” to “MODE 1”.
█
Main unit displays
“--:--”
• You connected the AC mains lead for the first time or there was a power
failure recently. Set the clock.
• Track play time is more than 99 minutes.
“ADJUST CLOCK”
• The clock is not set. Adjust the clock.
“ADJUST TIMER”
• The play timer is not set. Adjust the play timer.
“AUTO OFF”
• The system has not been used for 20 minutes and will switch off within a
minute. To cancel, press any button.
“DEVICE CONNECTED FULL”
• You have connected 3 Bluetooth® devices. To connect another device,
disconnect one of the connected devices and try again.
“ERROR”
• An incorrect operation was done. Read the instructions and try again.
“F ” / “F ” (“ ” represents a number.)
• The protection circuit has been activated and the system may be switched off
automatically.
• Disconnect the AC mains lead and wait for a few seconds before connecting
it again. If the problem persists, disconnect the AC mains lead and consult
your dealer.
“NO DISC”
• You have not put in a disc.
“NO PLAY”
“UNSUPPORT”
• There is no album or track in the USB device.
• Examine the content. You can only play supported format.
• The system may have a problem. Switch off the system and then switch on
again.
“NOT SUPPORT MULTI CONNECT”
• The Bluetooth® connection cannot be established. Disconnect the existing
connected devices and try again.
“NOT SUPPORTED”
• To use Karaoke effect in AUX source, set “AUX MODE” to “MODE 1”.
“PLAYERROR”
• An unsupported MP3 file has been played. The system will skip that track and
play the next one.
“REMOTE 1”
“REMOTE 2”
• The remote control and the main unit are using different codes. Change the
code of the remote control.
– When “REMOTE 1” is shown, press and hold [OK] and [ ] on the remote
control for a minimum of 4 seconds.
– When “REMOTE 2” is shown, press and hold [OK] and [<] for a minimum of
4 seconds.
“TEMP NG”
• The temperature protection circuit has been activated, and the system will
switch off. Let the unit cool down before switching it on again.
• Check that the ventilation opening of the unit is not obstructed.
• Ensure this unit is well ventilated.
“USB A NO DEVICE”
“USB B NO DEVICE”
• The USB device is not connected. Examine the connection.
“USB OVER CURRENT ERROR”
• The USB device is drawing too much power. Disconnect the USB device,
switch off the system and then switch on again.
• Check the connection, it may be caused by a faulty USB cable.
“VBR”
• The system cannot show the remaining play time for variable bit rate (VBR)
tracks.
Remote control code
When other Panasonic equipment responds to the remote control of this
system, change the remote control code for this system.
Preparation
Press [SELECT] repeatedly on the main unit to select “AUX”.
█
To set the code to “REMOTE 2”
1Press and hold [SELECT] on the main unit and [<] until
“REMOTE 2” is shown.
2Press and hold [OK] and [<] for a minimum of 4 seconds.
█
To set the code to “REMOTE 1”
1Press and hold [SELECT] on the main unit and [ ] on the
remote control until “REMOTE 1” is shown.
2Press and hold [OK] and [ ] on the remote control for a
minimum of 4 seconds.
System memory reset
Reset the memory when the following situations occur:
• There is no response when buttons are pressed.
• You want to clear and reset the memory contents.
1Disconnect the AC mains lead.
2While you press and hold [1] on the main unit, connect the AC
mains lead again.
Continue to press and hold the button until “
– – – – – – – – –” is shown.
3Release [1].
All the settings are set back to the factory preset.
It is necessary to set the memory items again.
MODE 1
(default) Select this mode to use the Karaoke effect function.
MODE 2 Select this mode when watching TV, movies or using an
external player with Karaoke features.
Rear panel of
this main unit
Audio cable
(not supplied)
DVD player (not supplied)
Produktspezifikationen
| Marke: | Panasonic |
| Kategorie: | Stereoanlage |
| Modell: | SC-AKX520E |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Panasonic SC-AKX520E benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Stereoanlage Panasonic
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
8 Oktober 2022
Bedienungsanleitung Stereoanlage
- Stereoanlage Medion
- Stereoanlage Philips
- Stereoanlage SilverCrest
- Stereoanlage Sony
- Stereoanlage Yamaha
- Stereoanlage Denver
- Stereoanlage ECG
- Stereoanlage Thomson
- Stereoanlage Blaupunkt
- Stereoanlage Grundig
- Stereoanlage Ideen Welt
- Stereoanlage Pioneer
- Stereoanlage JVC
- Stereoanlage TERRIS
- Stereoanlage Reflexion
- Stereoanlage Magnum
- Stereoanlage Roadstar
Neueste Bedienungsanleitung für -Kategorien-
27 August 2024
27 August 2024
1 August 2024
7 Juli 2024
6 Juli 2024
6 Juli 2024
3 Juli 2024
2 Juli 2024
1 Juli 2024
25 April 2023