Panasonic EX22APN Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Panasonic EX22APN (1 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
5SENSITIVITY ADJUSTMENT
Step
1.
Turn the sensitivity adjuster fully counterclockwise
to the minimum sensitivity position, MIN.
2.
In the light received condition, turn the sensitivity
adjuster slowly clockwise and conrm the point A
where the sensor enters the “Light” state operation.
3.
In the dark condition, turn the sensitivity adjuster further
clockwise until the sensor enters the “Lightstate op-
eration and then bring it back to conrm point B where
the sensor just returns to the “Dark” state operation.
If the sensor does not enter the Light” state
operation even when the sensitivity adjuster is
turned fully clockwise, the position is point B.
4. The position at the middle of points A and B
is the optimum sensing position.
6CAUTIONS
This product has been developed / produced for industrial use only.
The thin cable (0.1mm2) is used for this product. Thus, take care that
if the cable is pulled with excessive force, it may cause cable break.
EX-24 are not incorporated with a sensitivity adjuster.
If there is a reflective object (conveyor, etc.) in the back-
ground, since it may affect the sensing, use these models
by keeping enough distance from the reective object.
If a reective object is present in the background, the sensing
of EX-28 may be affected. When setting the sensor, make
sure to conrm that the reective object has no effect. In case
the reective object affects the sensing, take measures such
as removing the reective object or coloring it in black, etc.
If sensors are mounted close together and the ambient temperature is near
the maximum rated value, provide for enough heat radiation / ventilation.
Make sure to carry out wiring in the power supply OFF condition.
Take care that wrong wiring will damage the sensor.
Verify that the supply voltage variation is within the rating.
If power is supplied from a commercial switching regulator, ensure that the frame
ground (F.G.) terminal of the power supply is connected to an actual ground.
In case noise generating equipment (switching regulator, inverter
motor, etc.) is used in the vicinity of this product, connect the frame
ground (F.G.) terminal of the equipment to an actual ground.
Extension up to total 50m (each emitter and receiver
of thru-beam type), or less, is possible with 0.3mm
2, or
more of conductor area cable. However , the extension of
a power supply line and the output line less than 10m of
is acceptable in case using this product as conforming to
S-mark
.
Do not run the wires together with high-voltage lines or power lines or put
them in the same raceway. This can cause malfunction due to induction.
Do not use during the initial transient time (50ms) after the
power supply is switched ON.
Take care that the sensor is not directly exposed to uorescent
lamp from a rapid-starter lamp, a high frequency lighting de-
vice or sunlight etc., as it may affect the sensing performance.
This sensor is suitable for indoor use only.
Do not use this sensor in places having excessive vapor, dust,
etc., or where it may come in contact with corrosive gas, etc.
Take care that the sensor does not come in contact with oil, grease,
organic solvents such as thinner, etc., strong acid, or alkaline.
This sensor cannot be used in an environment containing
inammable or explosive gases.
Never disassemble or modify the sensor.
7RoHS DIRECTIVE
This equipment complies with RoHS (EC and Chinese directive).
Chinese RoHS indicates inclusion despite regulation
value. (Refer to Chinese part.)
Optimum position
B
A
A
B
INSTRUCTION
MANUAL
Amplier Built-in Ultra-compact Type Photoelectric Sensor
EX-20 Series
MJECK-EX20 No.0054-68V
Thank you very much for purchasing Panasonic products.
Please read this Instruction Manual carefully and thorough-
ly for the correct and optimum use of this product. Kindly
keep this manual in a convenient place for quick reference.
Please refer our web site (
http://panasonic.net/id/
pidsx/global
)”.
Access method is “Download → “Manual”→ “Model No.”.
If you could not visit our web site, contact our sales
ofce near your sight.
WARNING
Never use this product as a sensing device for personnel protection.
In case of using sensing devices for personnel protection, use
products which meet laws and standards, such as OSHA, ANSI or
IEC etc., for personnel protection applicable in each region or country.
1
INTENDED PRODUCTS FOR CE MARKING
Refer our web site (
http://panasonic.net/id/
pidsx/global
)” for the intended products.
Contact for CE
Panasonic Marketing Europe GmbH Panasonic Testing Center
Winsbergring 15, 22525 Hamburg,Germany
2PART DESCRIPTION
Operation mode switch
(Note 3)
L: Light-ON
D: Dark-ON
Sensitivity adjuster
(Note 2)
Se ns in g ra nge b ec o mes
longer when turned clockwise
Operation indicator
(Orange) (Note 1)
L i g ht s u p w he n t h e
sensing output is ON
Stability indicator (Green)
(Note 1)
Li gh t s u p u n de r th e
stable light condition or
the stable dark condition
Front sensing
Side sensing
Notes: 1) Not incorporated on the thru-beam type sensor emitter.
2) Not incorporated on the thru-beam type sensor receiver.
3) Incorporated on the thru-beam type sensor receiver only.
3MOUNTING
The tightening torque should be 0.5N·m or less.
M3 screw
M3 pan head
screw (Note)
Note: When mounting the front sensing type sensor, use M3 pan
head screws without washers, etc.
4WIRING DIAGRAMS
(Brown) +V
(Black)
Output (Note)
(Blue) 0V
Load
+
-
12 to 24V DC
±10%
PNP output type
(Brown) +V
(Black)
Output (Note)
(Blue) 0V
Load +
-
12 to 24V DC
±10%
NPN output type
Note:
The thru-beam type sensor emitter does not incorporate the output.
http://panasonic.net/id/pidsx/global
Overseas Sales Division (Head Ofce)
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Phone: +81-568-33-7861 FAX: +81-568-33-8591
For sales network, please visit our website.
© Panasonic Industrial Devices SUNX Co., Ltd. 2016
PRINTED IN JAPAN


Produktspezifikationen

Marke: Panasonic
Kategorie: Nicht kategorisiert
Modell: EX22APN

Brauchst du Hilfe?

Wenn Sie Hilfe mit Panasonic EX22APN benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Panasonic

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-