Panasonic ET-SFR330 Bedienungsanleitung

Panasonic Nicht kategorisiert ET-SFR330

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Panasonic ET-SFR330 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/6

ENGLISH

Operating Instructions

ET-SFR330

Model No.

ENGLISH

FRANÇAIS

Smoke Cut Filter Commercial Use

Thank you for purchasing this Panasonic product.

■Please read these operating instructions and the projector operating instructions

carefully, and then use this product correctly.

■Before using this product, be sure to read “Read this rst!” (Page 2).

■Please save this manual for future use.

■When installing the smoke cut lter to projector models other than the PT-RQ13K

series, PT-RZ12K series, and PT-RS11K series, refer to the Operating Instructions

supplied with the projector.

TQZJ724-2

2 - ENGLISH

█ Contents

CAUTION:

Before replacing the lter, be sure to turn the power o󰀨 and disconnect the

power plug from the wall outlet.

zFailure to do so may result in electric shock.

Read this rst! Always follow these precautions

Read this rst! ......................................................................................2

Switching the lter ...............................................................................3

Before switching the lter 3 ........................................................................

Removing the air lter unit 3.......................................................................

Installing the smoke cut lter 4 ...................................................................

Smoke cut lter replacement cycle ....................................................5

If the indicator lights... 6 .........................................................................

ENGLISH - 3

Before switching the filter

This lter should be attached when using the projector at stage events or other venues where

smoke may be generated.

Switch the air lter unit that is standard-equipped on the projector with this lter in such cases.

Attention

zTurn the main power o󰀨 before switching the lter.

zMake sure that the projector is stable when attaching the lter, and work in an environment that is safe, even

in the event of the air lter unit or smoke cut lter dropping.

zDo not reuse the smoke cut lter, even after cleaning or maintenance. Always replace the lter with an unused

lter after use.

zAfter attachment of this smoke cut lter, be sure to switch the [FILTER TYPE] setting of the projector from

[NORMAL] to [SPECIAL].

When you are nished using the smoke cut lter and switch it with the air lter unit, be sure to switch the [FILTER

TYPE] setting back to [NORMAL].

Note

zDo not use smoke cut lter at high altitudes (1 400 m (4 593') above sea level) or in places where the ambient

temperature is 35 °C (95 °F) or higher. (PT-RQ13K series)

zDo not use smoke cut lter at high altitudes (1 400 m (4 593') above sea level) or in places where the ambient

temperature is 40 °C (104 °F) or higher. (PT-RZ12K series, PT-RS11K series)

zAll the projector illustrations in this manual are based on PT-RZ12K model.

Removing the air filter unit

Air lter cover

Air lter cover xing screw Projector tabs

Projector tabs Air lter unit

Filter compartment and

projector intake area

Fig. 1 Fig. 2 Fig. 3

1) Turn o󰀨 the projector and disconnect the power plug from the wall outlet.

zWhen the power is to be turned o󰀨, be absolutely sure to follow the procedure described in

“Switching o󰀨 the projector” in the operating instructions of the projector.

2) Remove the air lter cover. (Fig. 1)

zRemove the air lter cover by turning the air lter cover xing screw counterclockwise using a

Phillips head screwdriver until it turns freely.

zLoosen the air lter cover xing screw while supporting it.

3) Remove the air lter unit. (Fig. 2, 3)

zGently press the latch on the lens side (front side) of the air lter unit's frame in the direction

of the arrow to release it from the projector tabs. While holding the latch, gently pull the frame

toward you, and release the tabs on the other side to remove the unit.

zAfter removing the air lter unit, remove any accumulated dust or dirt from the lter

compartment and projector air intake area.

Switching the lter

Produktspezifikationen

Marke:	Panasonic
Kategorie:	Nicht kategorisiert
Modell:	ET-SFR330
Produkttyp:	Filter-Set
Produktfarbe:	Black, White
Warentarifnummer (HS):	85299097
Markenkompatibilität:	Panasonic