Panasonic CQ-RDP143N Bedienungsanleitung

Panasonic Autoradio CQ-RDP143N

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Panasonic CQ-RDP143N (5 Seiten) in der Kategorie Autoradio. Dieser Bedienungsanleitung war für 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

■ ■General Stereo Radio

Frequency Range

Usable Sensitivity

Stereo Separation

87.5 - 108 MHz

6 dB/µV(S/N 30 dB)

35 dB (at 1 kHz)

Frequency Range

Usable Sensitivity

531 - 1 602 kHz

28 dB/µV (S/N 20 dB)

Frequency Range

Usable Sensitivity

153 - 279 kHz

32 dB/µV (S/N 20 dB)

■CD Player

Sampling Frequency

Pick-Up Type

Light Source

Wavelength

Frequency Response

Total Harmonic Distortion

Signal to Noise Ratio

Wow and Flutter

Channel Separation

Astigma 3-beam

Semiconductor laser

780 nm

20 Hz - 20 kHz (±1 dB)

96 dB

0.01 % (1 kHz)

Below measurable limits

75 dB

8 times oversampling

Specifications

CD Changer: CX-DP880N

(For Upgrade)

(For CQ-RDP153/RDP143/RDP133N)

Stereo/Mono Power Amplifier:

CY-M7052EN/CY-M9054EN

(For Upgrade)

Note:

Specifications and design are subject to modification

without notice due to improvements.

CQ-RDP153N CQ-RDP143N

CQ-RDP133N CQ-RDP123N

CQ-RDP113N CQ-RDP103N

CQ-RDP003N

Thank you very much for purchasing a Panasonic CD Player/Receiver.

Sophisticated Product Achieived by Optional Functions

●Sound System with Spurting Realism

(2-channel or 4-channel Power Amplifier)

●Powerful Heavy Bass

(Stereo/Mono Power Amplifier) : CY-M7052EN/CY-M9054EN

●Smooth Uninterrupted Play

(CD Changer) : CX-DP880N, etc

Fantastic

Sound Space!

■Radio The newly developed Alpha tuner enhances the reception sensitivity of FM broadcasts.

It is also less affected by receiving conditions inside and outside the vehicle.

■RDS The sensitivity in the AF mode is adjustable and the region-to-region signal strength is

memorized, which means the automatic best program reception can be achieved.

Subwoofer (For Upgrade)

Power Supply

Tone Controls (Bass)

Tone Controls (Treble)

Current Consumption

Maximum Power Output

Power Output

Speaker Impedance

Pre-Amp Output Voltage

Pre-Amp Output Impedance

Dimensions (Main Unit)

Weight (Main Unit)

12 V DC(11 V - 16 V),

Test Voltage 14.4 V, Negative Ground

±12 dB at 100 Hz

±12 dB at 10 kHz

Less than 2.5 A

(CD mode, 0.5 W 4-Speaker)

45 W x 4 (at 4 Ω)

20 W x 4 (DIN45 324, at 4 Ω)

4 - 8 Ω

2.5 V (CD mode)

200 Ω

178(W) x 50(H) x 155(D) mm

1.4 kg

Removable Front Panel CD Player/Receiver with CD Changer Control

CQ-RDP153/RDP143/RDP133N

Removable Front Panel CD Player/Receiver

CQ-RDP123/RDP113/RDP103/RDP003N

Operating Instructions

Something wrong....?! (Ex. smoke, smell and no sound Bpossibility of fire or shorting.)

qTurn off the power.

wDetach the power cord and bring the unit to your dealer.

Product service, repair and enquiry

8Consult your nearest Panasonic Service Centre.

Trouble Check point

●Adjust the balance and fader.

●Verify the wiring.

●

Connect the speaker cord correctly.

3Sound quality

Left and right

sounds are

reversed

No sound from

left, right, front,

or rear speaker

3Error indication

●CD dirtied

●CD upside

down

●CD

scratched

●No operation

by some

cause.

●No CD in

magazine

CD player

●Eject the CD.

CD changer

●Next CD auto-

selected

●Consult your near-

est Panasonic

Service Centre.

●Insert CDs in the

magazine.

Message Cause Remedy

(Changer only)

Troubleshooting

3General

No sound

Noise

●

Tune in to another high-intensity station.

●Make sure that the antenna mount-

ed point is grounded properly.

3Radio

Frequent

noise

●Load the CD correctly.

●Clean the CD.

●The maximum permissible tilt is

30°.

●Secure the unit.

3CD Player

No sound, or

disc is automati-

cally ejected

Sound skip

due to

vibration

●Never try repair by yourself.

No power

●Start the engine. (

Or turn the

ignition switch to the ACC position.

)

●Verify the wiring. (Ex. Battery cord,

ACC cord, grounding cord, etc.)

●Fuse blown (Contact the nearest

Panasonic Service Centre.)

●Ask a professional for fuse

replacement.

●

Be sure to use the same rated fuse.

●Disable the mute function.

●Verify the wiring.

●Wait until the dew disappears

before turning on the unit.

●Make sure that the ground lead is

grounded properly.

●Connect the battery cord correctly.

Preset data

deleted

Sound skip,

poor

sound quality

●Clean the CD.

Trouble Check point

3CD Player (CONTINUED)

CD not

ejectable

●Press . If the CD is not ejected,[ ]u

contact the nearest Panasonic

Service Centre.

YEFM284003 ND1202-0 Printed in China

Matsushita Electric Industrial Co., Ltd.

Web Site : http://www.panasonic.co.jp/global/

www.panasonic.co.uk (for UK customers only)

8Order accessory and consumable items for your

product with ease and confidence by telephoning

our Customer Care Centre Mon–Friday

9:00am–5:30pm. (Excluding public holidays.)

8Or go on line through our Internet Accessory

ordering application.

8Most major credit and debit cards accepted.

All enquiries transactions and distribution facilities

are provided directly by Panasonic UK Ltd.

8It couldn’t be simpler!

Customer Care Centre

For UK customers: 08705 357357

For Republic of Ireland customers: 01 289 8333

8This operating instruction manual applies to the seven models below.

The difference among these models are mentioned below.

8All illustrations represent model CQ-RDP153N unless otherwise specified.

8Remote control unit is an option. (CA-RC61EX)

Models Changer Control Pre-out

4(Front/Rear)

2(Rear)

CQ-RDP153N Yes

CQ-RDP143N Yes

CQ-RDP133N Yes

CQ-RDP123N None

CQ-RDP113N None

CQ-RDP103N None

CQ-RDP003N None

Face Color

Plating Silver

Coating Black

Coating Silver

CQ-RDP153N

Note: An alarm is generated to remind you of the

face plate when turning off the power.

3Install the face plate

Release the

face plate.

Cautions

This product is a class laser product.I

●A laser beam leak results in hazardous radiation

exposure.

●Do not open covers and do not repair it by your-

self. Refer servicing to qualified personnel.

●Wave length : 780 nm

●Laser power : No hazardous radiation is

emitted with safety protection.

BAND

DISP

]TUNE[

qSlide the left side.

wPress the right side

until a

“

click

”

is heard.

Press [BAND] to

select the radio AM

(MW/LW) mode

( )aRefer to “Radio”

Press [DISP]

Hold down

[DISP]

for 2

seconds or more

Press [ ]]TUNE[

Press [DISP]

Press [ ]]TUNE[

Press [DISP]

Precaution

(Attached sheet ☞q)

3For safe driving

Moderate the volume not to miss traffic information.

3Shorting prevention

Do not wet this unit.

3CD slot

Do not insert anything other than a CD.

3Power supply

12-volt negative ground battery system

3Protection of preset memory

Never disconnect the battery cord.

Accessories

(Attached sheet ☞w)

●Operating Instructions

●Installation Instructions

●Supplied Hardware (aInstallation Instructions)

●Warranty Card

●Removable Face Plate Case

Fuse

●Use fuses of the same specified rating (15A).

●Using different substitutes or fuses with higher

ratings, or connecting the unit directly without a

fuse, could cause fire or damage to the unit.

●If the fuse replacement fails, contact your near-

est authorized Panasonic Service Centre.

Maintenance

●Wipe the unit with a soft dry cloth.

●Never apply volatile liquids such as benzine and

thinner to prevent damage.

Take the face plate with you when leaving the car.

Theft Prevention

3Remove the face plate

qPull the right side.

wSlide the left side.

Detach the face

plate.

Put the face plate into

the case.

●Only when

“

NO CT

”

appears in the step w

below, set the clock.

Clock Setting

Notes on discs

(Attached sheet ☞e)

●Do not touch the recorded surface.

●Avoid leaving CDs in places with direct sunlight,

dust and moisture such as seat and dashboard.

●Do not use irregular shaped discs.

●You may have trouble playing discs in the follow-

ing cases.

●Dirt, fingerprints, scratches on the disc surface

●If a disc is damaged from leaving inside a car for

extended periods, etc.

●Inappropriate writing software and a CD changer

are used.

●Contains other than CD-DA data.

(AM mode)

(NO CT)

(Blink: Hours)

Adjust hours

(Blink: Minutes)

Adjust minutes

(Completed)

(CD)

(Changer) Disc No.

(Changer)

Illumination Color

Blue/Red

Amber

Green

Blue/Red

Amber

Green

Amber

Disc No.

( ☞)-marked points in this book have supplemen-

tary information. Refer to the information as needed.

English

CQ-RDP153N

MONO OFF/LOCAL OFF

MONO ON/LOCAL OFF

MONO ON/LOCAL ON

MONO OFF/LOCAL ON

How to Enjoy Music

Power on

Enjoy music in each mode

Press to select a band.

FM1

FM2

FM3

AM (LW/MW)

Mono/Local Selection

Mono: Reduce noise if weak signals are received

Local: Only strong signals of stations are searched

for in seek tuning.

Display Change

Program Service Name

Frequency

Clock Time

(3 seconds)

Note: A station name appears when it is an RDS

station.

Remote Control Sensor

PTY(Programme Type)/

MONO/LOC(Local)

AF(Alternative Frequency)/

REG(Region)

DISP(Display)/CT(Clock Time)

SRC(Source)/

POWER

MUTE/LOUD(Loudness)

CD Slot Eject

{ }DISC

Note: When first powered up, a demonstration message

appears. Press [DISP] to stop the demonstration message.

<TUNE>

6 TRACK 7

Fast Forward/Fast Reverse

■FM broadcast

Hold down for 2 seconds or more[PTY](MONO/LOCAL)

change the mode.

■AM(LW/MW) broadcast

Press [PTY](MONO/LOCAL)

to change the mode.

Turn to change each level

Turn to adjust

■Sound Control

■Volume Adjustment (Setting range: 0 to 40)

■ ■Mute Loudness

Sound Controls

●Next track: [7]Press

●Start of current track: [6]Press once

●Previous track: [6]Press twice

●Fast forward: [7]Hold down

●Fast reverse: [6]Hold down

●Previous disc : Press[{]

●Next disc : [}] Press

Disc indicator

Make sure that the disc indicator is off before loading a disc.

If the disc indicator lights, eject the disc, then load a new disc.

Only discs with the label at

right are available.

Note: Not compatible with CD-RW (except when CX-DP880N is connected).

Trouble may occur while playing CD-Rs/CD-RWs. Refer to the section on “Notes

on discs (CD-R, CD-RW)” (Attached sheet ☞e)

(–12 to +12 in 2 dB step)

(left/right: 1 to 15)

(front/rear: 1 to 15)

(0 to 40)

Bass

Treble

Balance

Note:

If no operation takes place for 5 seconds or more (2 seconds in the

volume mode), the display return to the regular mode.

Fader

CQ-RDP153N

PTY (MONO/LOC)

DISP

Press to select a mode

Press to switch on and off.

●Mute the sound completely.

Hold down for 2 seconds or more

to switch on and off.

●Enhance bass and treble tones at low

volume.

Volume

Radio

CD Changer

CD Player

TA(Traffic Announcement)

VOLUME/SEL(Select)

2■Seek tuning

Hold down for 0.5 seconds or more.

Tuning will automatically stop when the next station is found.

[>]: higher frequency

[<]: lower frequency

■Manual Tuning

[>]: higher frequency

[<]: lower frequency

LOCAL OFF

LOCAL ON

■Disc Eject

■Pause

Radio

Player

Changer

For

CQ-RDP153

CQ-RDP143

CQ-RDP133N

Display Change

Track Number/Playing Time

Clock Time

■ ■CD player mode CD changer mode

Clock Time

(Hold down for 2 seconds

or more)

Disc Number/Track Number

Playing Time

When a disc is loaded.

●Press to select a mode as follows.

●When a disc is not loaded

Insert a disc and playback starts automatically. (Attached sheet ☞!0)

■Track selection and track search

●When magazine is not loaded

Insert a magazine with discs and playback starts automatically.

■Disc selection

■Track selection and track search

(Refer to the CD player mode.)

●Press to power on.

●Press again and hold to power off.

Changer indicator

Lights when a changer with magazine is connected.

REPEAT

RANDOM

SCAN

REP

1st track on each disc

(changer only):

Hold down [5] for 2 seconds or more.

All tracks: Press [5].

DISC

●10 seconds play of each track.

●Random play

●Press again to cancel in each play mode.

Press

LOUD

(Press)

CD-RW

CD-RW WMA

WMA

● ●Available Discs Non-available

MP3

8 cm

1 to 6 (Preset Memory)

BAND/APM(Auto Preset Memory)/

y/5(Pause)

When a changer is connected.

(For CQ-RDP153/RDP143/RDP133N)

Release it to resume regular CD play.

Press [u] to stop CD play and eject the disc.

Press [BAND] (h 5/) to pause. Press again to resume to playback.

Press

All tracks: Press lights.[4].

All tracks on the current disc

(changer only):

Hold down for 2 seconds[4]

or more. blinks.

●Repeat play

Current track:

Press lights.[6].

Current disc

(changer only):

Hold down for 2 seconds[6]

or more. blinks.

REP

Convenient Function

Radio Data System (RDS)

RDS is a system performing convenient functions for FM stations in

such as Europe. However, there may be some areas where RDS is

not effective for reception.

8Station name appears instead of the frequency.

8The clock is automatically adjusted.

AF Alternative frequency

8When reception is poor, an RDS station broadcasting the same pro-

gram is tuned in automatically.

3To select AF receiving sensitivity aPress [AF]

(Attached sheet ☞r)

AF1 : For mountain areas and places enclosed by high-rise

buildings or other objects that prevent radio reception.

(Default)

AF2 : For suburbs and other places free of obstructions of view.

OFF : For the AF function inactivated.

3To change AF range aHold down for 2 seconds[AF]

or more

8REGION ON : To select a station broadcasting the same program

8REGION OFF : To select an AF station of the same network

(The program may be different) (Default)

3AF1 or AF2 auto preset memory

8The memory is valid for the RDS stations only.

8A station of the same network in good receiving condition is

received.

8If a preset station is in poor receiving condition, another station in

good receiving condition can be tuned in to by pressing the same

preset button. (Best Station Research)

8PI Seek (Attached sheet ☞t)

TA Traffic Announcements

8To automatically listen to a station that gives

traffic information periodically.

3To select TA mode aPress [TA] (Attached sheet ☞y)

(Default : TA OFF)

8To cancel aPress [TA] again.

Notes:

8If a selected station is in poor receiving condition, another station

giving traffic announcements will be automatically tuned in.

8When TA ON is selected, only TP station will be searched. When TA

ON is selected, only TP station will be memorized automatically.

8Even in CD player and CD changer modes, a station giving the traf-

fic information is automatically received.

3To listen to TA only aHold down for 2 seconds[TA]

or more (in FM mode)

8To cancel aPress again. [TA]

(Or, raise the volume with [VOL]).

3TA Volume Set (Attached sheet ☞u)

PTY Program Type

8Stations can be selected by program type,

for example, news and rock.

3To select mode PTY aPress [PTY] (Attached sheet ☞i)

8To cancel aPress again.[PTY]

3PTY preset call aPress [1] to [6]

8The following program types are preset. (Attached sheet

☞o)

q w e r t yNews Speech Sport Pop music Classics Music

3PTY selection

qPress []TUNE[] to select a program type below.

wPress for automatic selection.[BAND]

3PTY preset change

qSelect a program type by using PTY selection or PTY pre-

set call.

wHold down [1] to [6] for 2 seconds or more.

Note: When there is no corresponding program type, “NO PTY” is

displayed.

3Emergency Announcement

8An emergency announcement, if broadcast, is automatically

received.

This function operates in other than the radio mode, and

“

ALARM

”

flashes.

Note: Press

[DISP]

to switch the PTY display language to Swedish.

EON Enhanced Other Networks

8Traffic information of the other networks is received.

8Preset AF data is refreshed at all times.

FM broadcast AM(LW/MW)

broadcast

(Changer)(CD)

Note: Remote control unit is an option (CA-RC61EX). For details, refer to the manual of the remote

control unit.

SPEECH

INFO

CULTURES

ROCK M

OTHER M

SOCIAL A

LEISURE

OLDIES

AFFAIRS

DRAMA

POP M

CLASSICS

CHILDREN

TRAVEL

NATIONAL

NEWS

EDUCATE

VARIED

LIGHT M

FINANCE

PHONE IN

COUNTRY

DOCUMENT

MUSIC

SPORT

SCIENCE

M_O_R_ M

WEATHER

RELIGION

JAZZ

FOLK M

Preset Memory

●Up to 6 stations can be stored in each of the FM1, FM2, FM3 and AM (LW/MW) band

selections.

Press to select a band for preparation.

■Auto Preset Memory

Hold down for 2 seconds or more.

●Automatically tune the 6 stations with good reception and save

under preset buttons [1] to [6].

●Preset stations appear for 5 seconds each.

Notes:

●Only RDS stations will be saved at default setting (AF is ON).

●To stop scanning, press one of the preset buttons [1] to [6].

■Manual Preset Memory

Hold down one of the preset buttons until the display[1] to [6]

blinks once.

Note: New stations overwrite existing saved stations after following this procedure.

Press to call a preset station.[1] to [6]

Caution: Never preset stations while driving.

■Preset station calling

Use seek or manual tuning to find a station.

This unit does not support CD text display.

Band

Preset Number

Frequency

●Please read these instructions carefully before using this product and keep this manual for future reference.

●Bitte lesen Sie diese Bedienungsanleitung vor der Verwendung dieses Produktes aufmerksam durch und bewahren

Sie sie danach für spätere Nachschlagzwecke sorgfältig auf.

●Prière de lire ces instructions attentivement avant d’utiliser le produit et garder ce manuel pour l’utilisation ultérieure.

●Leest u deze instructie alstublieft zorgvuldig door voor u dit product in gebruik neemt en bewaar deze handleiding voor later gebruik.

YEFM292919 ND1202-0 Printed in China

Matsushita Electric Industrial Co., Ltd.

Web Site : http://www.panasonic.co.jp/global/

How to install the unit/Einbau des Gerätes/Mode de montage de l’appareil/Installeren van het toestel

Supplied Hardware/Mitgelieferte Hardware/Matériel d’installation/Meegeleverde onderdelen

No. Diagram

Q'ty

Item No. Diagram

Q'ty

Item

Mounting collar

Einbauhalterung

Cadre de montage

Bevestigingskraag

Bolt (5 mm )

Befestigungsschraube (5 mm )

Boulon (5 mm )

Bout (5 mm )

ISO antenna adapter

ISO-Antennenadapter

Adaptateur d’antenne ISO

ISO antenne-adapter

Lock cancel plate

Verriegelungsfreigabeplatte

Plaque anti-blocage

Ontgrendelingsplaat

Power connector

Versorgungsstecker

Connecteur d’alimentation

Stroomstekker

Installation/Einbau/Montage/Installatie

2Mounting collar insertion Bend mounting tabs.

Einsetzen der Einbauhülse

Biegen Sie die Einbaulaschen ab.

Insertion du collier de fixation Replier les languettes de fixation

Inbrengen bevestigingskraag Buig bevestigingslipjes om.

Connection of power connector

Anschluß des Versorgungssteckers

Raccordement du connecteur d'alimentation

Aansluiten van de stroomstekker

5Trim plate mounting

Anbringen der Abdeckplatte

Installation de la plaque de garniture

Bevestigen van de afwerkingsrand

6Cable reconnection

Wiederanschließen des Kabels

Rebranchement du câble

Opnieuw aansluiten kabel

Remove the front panel.

Nehmen Sie das

Bedienteil ab.

Retirez le panneau de

façade.

Verwijder het voorpaneel.

Remove the trim plate.

Entfernen Sie die

Abdeckplatte.

Enlevez la plaque de

garniture.

Verwijder de afwerkingsrand.

Pull out the unit with

both hands.

Ziehen Sie das Gerät mit

beiden Händen heraus.

Retirez l’appareil à deux

mains.

Trek het toestel met beide

handen naar buiten.

Trim plate

Abdeckplatte

Plaque de garniture

Afwerkingsrand

How to remove the unit/Ausbau des Gerätes

Dépose de l’appareil/Verwijderen van het toestel

Lock release

q Insert the plate until you

hear a click.

w Pull the main unit while

pushing the plate inward.

Freigabe der Verriegelung

q Schieben Sie die Platte ein,

bis Sie ein Klickgeräusch

vernehmen können.

w Ziehen Sie an dem

Hauptgerät, während Sie die

Platte hineindrücken.

Libération du verrouillage

Insérer la plaque jusqu'à ce

qu'un déclic se produise.

Dégager l'appareil principal

tout en repoussant la plaque

vers l'intérieur.

Ontgrendeling

q Steek de plaat naar binnen

tot u een klik hoort.

w Trek het hoofdtoestel naar

buiten terwijl u de plaat

naar binnen drukt.

Cautions :

● Wear gloves for safety.

●Make sure that wiring is completed

before installation.

Vorsicht : ● Tragen Sie Handschuhe, um sich

vor Verletzungen zu schützen.

●Achten Sie vor dem Einbau darauf,

daß die Verdrahtung fertiggestellt ist.

Précautions:

● Porter des gants à des fins de sécurité.

● S'assurer que le câblage est terminé avant

l'installation.

Let op: ● Draag handschoenen voor uw veiligheid.

●Controleer of de bedrading correct is aangelegd

voor u gaat installeren.

Remove the cable from the battery negative terminal.

Trennen Sie das Kabel von der negativen Batterieklemme ab.

Retirer le câble de la borne négative de la batterie.

Koppel de kabel van de negatieve aansluiting van de accu los.

Bend appropriate tabs to secure the unit

without backlash.

Die entsprechenden Einbaulaschen so

umbiegen, daß das Gerät ohne Spielraum

fest sitzt.

Replier les languettes

de fixation appropriées

pour immobiliser

l'appareil sans

contrecoup.

Buig de juiste lipjes om

zodat het toestel vast

zit zonder speling.

Main unit securing qScrew the bolt into the main unit.

w Secure the rear of the main unit.

Snap the right and left springs into each hole.

Befestigung qSchrauben Sie die Schraube in das

des Hauptgerätes Hauptgerät.

wSichern Sie die Rückseite des

Hauptgerätes.

Lassen Sie die rechten und linken Federn in den

löchern einschnappen.

qVisser le boulon dans l'appareil principal.

w Fixer l'arrière de l'appareil principal.

Bouteroller les ressorts droit et gauche dans chaque trou.

qSchroef de bout in het hoofdtoestel.

w Zet de achterkant van het hoofdtoestel vast.

e Pas de rechter en linker veren in de

bijbehorende gaten.

isolatieband.

Secure loosened leads.

Sichern Sie alle losen Leiter.

Resserrez les connexions de fils.

Zet loshangende draden vast.

Securing to fire wall

Befestigung an Brandschutzwand

Obtenir un pare-feu

Vastzetten aan het brandschot

Using the rear support strap (Option)

Using the rubber cushion (Option)

Verwendung der Einbauleiste (Option) Verwendung des Gummikissens (Option)

Utiliser de la barrette de support arrière (Option) Utiliser la bague d'amortisseur en caoutchouc (Option)

Gebruik van de achter-steunstrip (optioneel)

Gebruik van het rubber stootkussen (optioneel)

3mm Tapp in g screw (Option)

Blechschraube (Option)

Vis taraudeuse (option)

Zelftappende schroef

(los verkrijgbaar)

To the unit

An das Gerät

Côté appareil

Naar het toestel

Rear support strap (Option)

Einbauleiste (Otpion)

Plaque-support arrière (option)

Achter-steunstrip

(los verkrijgbaar)

Hexagonal nut (Option)

Sechskantmutter (Option)

Ecrou hexagonal (option)

Zeskantige moer

(los verkrijgbaar)

Rear support bracket

(supplied with car)

Einbauleiste (vorhanden im

Fahrzeug)

Support arrière

(fourni avec votre voiture)

Achter-steunbeugel

(behorend bij de auto)

Rubber cushion (Option)

Gummikissen (Option)

Canon en caoutchouc (option)

Stootrubber (los verkrijgbaar)

To the unit

An das Gerät

Côté appareil

Naar het toestel

Clank!

Fixation de l'appareil

principal

Vastzetten

hoofdtoestel

IMPORTANT

When this unit is installed in dashboard,

ensure that there is sufficient air flow

around the unit to prevent damage from

overheating, do not block any ventilation

holes on the unit.

WICHTIG

Bei Einbau des Geräts im Armaturenbrett

sollte darauf geachtet werden, daß der

Luftstrom um das Gerät nicht behindert ist,

um Beschädigung durch Überhitzen zu

verhindern, und die Belüftungsöffnungen

des Geräts nicht blockiert sind.

IMPORTANT

Lorsque cet appareil est installé dans le

tableau de bord, assurez-vous qu'il y a une

circulation d'air suffisante autour de

l'appareil afin d'éviter tout endommagement

provoqué par une surchauffe et qu'aucun

trou d'aération de l'appareil n'est obturé.

BELANGRIJK

Wanneer dit toestel in het dashboard wordt

geïnstalleerd, moet u ervoor zorgen dat er

voldoende ventilatie is rond het toestel. Om

oververhitting te voorkomen mogen de

ventilatie-openingen in het toestel niet

afgedekt worden.

Produktspezifikationen

Marke:	Panasonic
Kategorie:	Autoradio
Modell:	CQ-RDP143N

Brauchst du Hilfe?

Wenn Sie Hilfe mit Panasonic CQ-RDP143N benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Autoradio Panasonic

Panasonic CQ-DP40EN Bedienungsanleitung

6 Oktober 2024

Panasonic CQ-RD435LEN Bedienungsanleitung

30 September 2024

Panasonic CQ-DP800LEE Bedienungsanleitung

15 September 2024

Panasonic CarKit Bedienungsanleitung

30 August 2024

Panasonic CQ-D50L Bedienungsanleitung

27 August 2024

Panasonic CD-FX835 Bedienungsanleitung

24 August 2024

Panasonic CY-VHD9401N Bedienungsanleitung

18 August 2024

Panasonic CQ-FX66LEN Bedienungsanleitung

17 August 2024

Panasonic CQ-RDP112N Bedienungsanleitung

15 August 2024

Panasonic CQ-J03LEE Bedienungsanleitung

4 August 2024

Bedienungsanleitung Autoradio

Neueste Bedienungsanleitung für -Kategorien-

JVC KD-R90BT Bedienungsanleitung

16 Oktober 2024

Kenwood KMM-X705 Bedienungsanleitung

16 Oktober 2024

Dual XDMR6850 Bedienungsanleitung

12 Oktober 2024

Caliber CA 160 V2 Bedienungsanleitung

12 Oktober 2024

Hifonics TXI3400 Bedienungsanleitung

8 Oktober 2024

Caliber MCD 265 Bedienungsanleitung

7 Oktober 2024

Caliber RCD120BT Bedienungsanleitung

7 Oktober 2024

Rockford Fosgate P300X2 Bedienungsanleitung

5 Oktober 2024

Renkforce SD-3023 Bedienungsanleitung

5 Oktober 2024

Autovision AV-2720 Bedienungsanleitung

5 Oktober 2024