Palmer MACHT 402 Bedienungsanleitung
Palmer
Gitarrenverstärker
MACHT 402
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Palmer MACHT 402 (28 Seiten) in der Kategorie Gitarrenverstärker. Dieser Bedienungsanleitung war für 27 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/28
MACHT402
SPECIALIZED GUITAR POWER AMP
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D`UTILISATION
MANUAL DE USUARIO
EN PREVENTIVE MEASURES
1.Please read these instructions carefully.
2.Keep all information and instructions in a safe place.
3.Follow the instructions.
4.Observe all safety warnings. Never remove safety warnings or other information from the
equipment.
5.Use the equipment only in the intended manner and for the intended purpose.
6.Use only sufciently stable and compatible stands and/or mounts (for xed installations). Make
certain that wall mounts are properly installed and secured. Make certain that the equipment is
installed securely and cannot fall down.
7.During installation, observ e the applicable safety regulations for your country.
8.Never install and operate the equipment near radiators, heat registers, ovens or other sources
of heat. Make certain that the equipment is always installed so that is cooled sufciently and
cannot overheat.
9.Never place sources of ignition, e.g., burning candles, on the equipment.
10.Ventilation slits must not be blocked.
11.Do not use this equipment in the immediate vicinity of water (does not apply to special
outdoor equipment - in this case, observe the special instructions noted below. Do not expose
this equipment to ammable materials, uids or gases. Avoid direct sunlight!
12.Make certain that dripping or splashed water cannot enter the equipment. Do not place con-
tainers lled with liquids, such as vases or drinking vessels, on the equipment.
13.Make certain that objects cannot fall into the device.
14.Use this equipment only with the accessories recommended and intended by the manufacturer.
15.Do not open or modify this equipment.
16.After connecting the equipment, check all cables in order to prevent damage or accidents,
e.g., due to tripping hazards.
17.During transport, make certain that the equipment cannot fall down and possibly cause pro-
perty damage and personal injuries.
18.If your equipment is no longer functioning properly, if uids or objects have gotten inside
the equipment or if it has been damaged in anot her way, switch it off immediately and unplug
it from the mains outlet (if it is a powered device). This equipment may only be repaired by
authorized, qualied personnel.
19.Clean the equipment using a dry cloth.
20.Comply with all applicable disposal laws in your country. During disposal of packaging,
please separate plastic and paper/cardboard.
21.Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS
22.CAUTION: If the power cord of the device is equipped with an earthing contact, then it
must be connected to an outlet with a protective ground. Never deactivate the protective
ground of a power cord.
23.If the equipment has been exposed to strong uctuations in temperature (for example, af-
ter transport), do not switch it on immediately. Moisture and condensation could damage the
equipment. Do not switch on the equipment until it has reached room temperature.
24.Before connecting the equipment to the power outlet, rst verify that the mains volta-
ge and frequency match the values specied on the equipment. If the equipment has a voltage
selection switch, connect the equipment to the power outlet only if the equipment values and
the mains power values match. If the included power cord or power adapter does not t in your
wall outlet, contact your electrician.
25.Do not step on the power cord. Make certain that the power cable does not become kinked,
especially at the mains outlet and/or power adapter and the equipment connector.
26.When connecting the equipment, make certain that the power cord or power adapter is always
freely accessible. Always disconnect the equipment from the power supply if the equipment
is not in use or if you want to clean the equipment. Always unplug the power cord and power
adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never
touch the power cord and power adapter with wet hands.
27.Whenever possible, avoid switching the equipment on and off in quick succession because
otherwise this can shorten the useful life of the equipment.
28.IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a
fuse blows repeatedly, please contact an authorised service centre.
29.To disconnect the equipment from the power mains completely, unplug the power cord or pow-
er adapter from the power outlet.
30.If your device is equipped with a Volex power connector, the mating Volex equipment con-
nector must be unlocked before it can be removed. However, this also means that the equipment
can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
31.Unplug the power cord and power adapter from the power outlet if there is a risk of a
lightning strike or before extended periods of disuse.
2
CAUTION
RIS K OF SEL E CTRIC HOC K
DO N O NOT PE
CAUTION: Never remove the cover, because otherwise there may be a
risk of electric shock. There are no user serviceable parts
inside. Have repairs carried out only by qualied service person-
nel.
The lightning ash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufcient magnitude to constitute a risk of
electrical shock.
The exclamation mark within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions.
CAUTION – HIGH VOLUME LEVELS WITH AUDIO PRODUCTS!
This equipment is intended for professional use. Therefore, commercial use of this equipment
is subject to the respectively applicable national accident prevention rules and regulations.
As a manufacturer, Adam Hall is obligated to notify you formally about the existence of poten-
tial health risks.
Hearing damage due to high volume and prolonged exposure: When in use, this product is ca-
pable of producing high sound-pressure levels (SPL) that can lead to irreversible hearing
damage in performers, employees, and audience members.
For this reason, avoid prolonged exposure to volumes in excess of 90 dB.
To prevent possible hearing damage, avoid listening at high volume levels over long
periods of time.
Even exposure to short bursts of loud noise can result in hearing loss. Please keep
the volume constantly at a comfortable level.
DANGER AT THE SPEAKER OUTPUT!
Power ampliers are capable of producing dangerously high voltages at the output. To avoid
electrical shock, never touch bare speaker wires or terminal posts while the power ampli-
er is in operation. Always connect amplier and speaker with a suitable speaker cable before
use.
INSTALLATION AND CONNECTION
For trouble-free operation, during setup and rack installation, it is absolutely necessary
to ensure that the air intake and ventilation of the power amplier are not obstructed. We
recommend the use of high-quality balanced cables(with two conductors for the audio sig-
nal plus separate shielding mesh) with XLR-type connectors for connecting the signal source
(e.g.,mixer) to the amplier. While it is also possible to connect unbalanced cables to the
power amplier inputs, for reasons of interference immunity, using balanced cables is always
preferable. In order to reduce power losses, speakers should always be connected using twin
axial speaker cables with a sufciently large cross-section.
DE SICHERHEITSHINWEISE
1.Lesen Sie diese Anleitung bitte sorgfältig durch.
2.Bewahren Sie alle Informationen und Anleitungen an einem sicheren Ort auf.
3.Befolgen Sie die Anweisungen.
4.Beachten Sie alle Warnhinweise. Entfernen Sie keine Sicherheitshinweise oder andere Informa-
tionen vom Gerät.
5.Verwenden Sie das Gerät nur in der vorgesehenen Art und Weise.
6.Verwenden Sie ausschließlich stabile und passende Stative bzw. Befestigungen (bei Festins-
tallationen). Stellen Sie sicher, dass Wandhalterungen ordnungsgemäß installiert und gesi-
chert sind. Stellen Sie sicher, dass das Gerät sicher installiert ist und nicht herunterfal-
len kann.
7.Beachten Sie bei der Installation die für Ihr Land geltenden Sicherheitsvorschriften.
8.Installieren und betreiben Sie das Gerät nicht in der Nähe von Heizkörpern, Wärmespeichern,
Öfen oder sonstigen Wärmequellen. Sorgen Sie dafür, dass das Gerät immer so installiert ist,
dass es ausreichend gekühlt wird und nicht überhitzen kann.
9.Platzieren Sie keine Zündquellen wie z.B. brennende Kerzen auf dem Gerät.
10.Lüftungsschlitze dürfen nicht blockiert werden.
11.Betreiben Sie das Gerät nicht in unmittelbarer Nähe von Wasser. Bringen Sie das Gerät
nicht mit brennbaren Materialien, Flüssigkeiten oder Gasen in Berührung. Direkte Sonnenein-
strahlung vermeiden!
12.Sorgen Sie dafür, dass kein Tropf- oder Spritzwasser in das Gerät eindringen kann. Stellen
Sie keine mit Flüssigkeit gefüllten Behältnisse wie Vasen oder Trinkgefäße auf das Gerät.
3
Produktspezifikationen
| Marke: | Palmer |
| Kategorie: | Gitarrenverstärker |
| Modell: | MACHT 402 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Palmer MACHT 402 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Gitarrenverstärker Palmer
25 August 2024
20 August 2024
19 August 2024
Bedienungsanleitung Gitarrenverstärker
- Gitarrenverstärker Valeton
- Gitarrenverstärker Roland
- Gitarrenverstärker Vox
- Gitarrenverstärker Yamaha
- Gitarrenverstärker Marshall
- Gitarrenverstärker Peavey
- Gitarrenverstärker Fender
- Gitarrenverstärker Behringer
- Gitarrenverstärker Boss
- Gitarrenverstärker Line 6
- Gitarrenverstärker Radial Engineering
- Gitarrenverstärker Hartke
- Gitarrenverstärker ART
- Gitarrenverstärker Orange
- Gitarrenverstärker Harley Benton
- Gitarrenverstärker Electro Harmonix
- Gitarrenverstärker Blackstar
- Gitarrenverstärker Bugera
- Gitarrenverstärker TC Electronic
- Gitarrenverstärker Ampeg
- Gitarrenverstärker Laney
- Gitarrenverstärker SPL
- Gitarrenverstärker Ashdown Engineering
- Gitarrenverstärker Suhr
- Gitarrenverstärker AER
- Gitarrenverstärker Markbass
- Gitarrenverstärker EBS
- Gitarrenverstärker Fishman
- Gitarrenverstärker Voodoo Lab
- Gitarrenverstärker GR Bass
- Gitarrenverstärker Two Notes
- Gitarrenverstärker Hughes & Kettner
- Gitarrenverstärker Dimavery
- Gitarrenverstärker AMT
- Gitarrenverstärker Budda
- Gitarrenverstärker Empress Effects
- Gitarrenverstärker DACS Audio
- Gitarrenverstärker Rivera
- Gitarrenverstärker DV Mark
Neueste Bedienungsanleitung für -Kategorien-
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
23 September 2024
19 September 2024
16 September 2024
6 September 2024
5 September 2024