Ozito ZLRTS-012 Bedienungsanleitung

Ozito Multifunktionswerkzeug ZLRTS-012

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito ZLRTS-012 (8 Seiten) in der Kategorie Multifunktionswerkzeug. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
ROTARY
TOOL
12V Lithium Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input Voltage: 12V
No Load Speed: 10,000 - 22,000/min
Collet Chuck Size: ø 2.3 / 3.2mm
Flexible Shaft Length: 1.0m
Tool Weight: 0.45kg
ZLRTS-012
STANDARD EQUIPMENT
Cordless Rotary Tool
Flexible Shaft
Accessories x 84
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries and chargers
are covered by a 12 month warranty. Warranty excludes
consumable parts, for example: accessories, carbon brushes etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0620
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Collet Nut
2 Shaft Collar
3 Spindle Lock Button
4 On/O󰀨Button
5 Variable Speed Controls
6 Battery Seating
CORDLESS ROTARY TOOL
KNOW YOUR PRODUCT
1. CHANGING ACCESSORIES
7 Flexible Shaft
8 Locking Collet
9 Spindle Lock
10 Fitting Collar
11 Rotary Accessories x 81
12 Spanner
ACCESSORIES
BATTERY & CHARGER
SETUP & PREPARATION
1 2 3 4 5 6
7 8 9 10 1211
WARNING! ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING ANY
OF THE FOLLOWING OPERATIONS.
1 Press and hold the spindle
lock button.
2 Unscrew the collet nut and
remove completely.
3 Insert the collet into the
spindle and then cover
with the collet nut.
4 Lightly tighten the collet nut so
that it stays in place.
5 Insert shaft of accessory
into the collet.
Note: The supplied collet will
t3.2mmbitswhen
fully open. When fully
tightened it can reduce
to hold 2.3mm bits.
6 Tighten collet nut using spindle
lock and spanner.
This tool is compatible with all batteries and chargers from the
Ozito Home-12volt range.
2. CHANGING ACCESSORIES CONT. 3. FLEXIBLE SHAFT
Locating a cutting/sanding disc
Locating a sanding drum
2 Fitthebreangeeitherside
of the cutting disc, then insert
the screw.
1 Loosen the screw on the top
of the sanding drum holder.
3 Tighten the cutting disc onto
the cutting disc holder.
2 Slide the sanding drum onto
the sanding drum holder.
1 Remove the screw from
the end of the disc holder.
Note: Do not over-tighten the screw as it could result in damage to the
cutting disc.
3 Tighten the screw until
the sanding drum sleeve
is secured.
1 Remove the shaft collar.
6 Insert the spindle lock key into
the hole on the handle.
2 Loosen the collet nut.
7 Loosen collet nut then insert
shank of accessory into collet.
3 Raise the handle end of
theexibleshaft&shake
gently until the inner
exibleshaftprotrudes
fromthettingcollaror
use a pair of pliers.
5 Screwtheexibleshaft
ttingcollarontothe
rotary tool.
8 Tightencolletnutandcheckallttingstoensuretheyaresecurely
fastened.
4 Inserttheinnerexibleshaftintothecolletthentightenthecollet
nut.
a
b
ab

Produktspezifikationen

Marke: Ozito
Kategorie: Multifunktionswerkzeug
Modell: ZLRTS-012

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito ZLRTS-012 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Multifunktionswerkzeug Ozito

Ozito

Ozito LMF-2050 Bedienungsanleitung

23 März 2024
Ozito

Ozito ZLRTS-012 Bedienungsanleitung

17 Dezember 2023
Ozito

Ozito PXMFTS-100U Bedienungsanleitung

27 November 2023
Ozito

Ozito RTR-040 Bedienungsanleitung

20 August 2023
Ozito

Ozito PXMFTS-100 Bedienungsanleitung

4 Juni 2023
Ozito

Ozito PXMFTK-200 Bedienungsanleitung

11 November 2022
Ozito

Ozito MFR-2200 Bedienungsanleitung

28 Oktober 2022

Bedienungsanleitung Multifunktionswerkzeug

Neueste Bedienungsanleitung fĂźr -Kategorien-

Taurus

Taurus E-MG 250 E Bedienungsanleitung

26 Juni 2024
Ergotools Pattfield

Ergotools Pattfield E-MG 250 E Bedienungsanleitung

26 Juni 2024
Bavaria

Bavaria BMG 220 E Bedienungsanleitung

26 Juni 2024
McKenzie

McKenzie MK-MG 18 Li Bedienungsanleitung

25 Juni 2024
Donau Elektronik

Donau Elektronik 0550 Bedienungsanleitung

23 Juni 2024
Baumr-AG

Baumr-AG HC3 Bedienungsanleitung

10 Juni 2024
Porter-Cable

Porter-Cable PCCE720 Bedienungsanleitung

7 Juni 2024
Lezyne

Lezyne Multi Chain Pliers Bedienungsanleitung

7 Juni 2024
Lezyne

Lezyne Tubeless Insert Kit Bedienungsanleitung

7 Juni 2024
Lezyne

Lezyne Pocket Torque Drive Bedienungsanleitung

7 Juni 2024