Ozito ZLMFTS-012 Bedienungsanleitung
Ozito
Multifunktionswerkzeuge
ZLMFTS-012
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito ZLMFTS-012 (6 Seiten) in der Kategorie Multifunktionswerkzeuge. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
MULTI
FUNCTION
TOOL
12V Lithium Ion
INSTRUCTION MANUAL
ZLMFTS-012
WHAT’S IN THE BOX
Multi Function Tool
ozito.com.au
Accessories x 6
SPECIFICATIONS
Input: 12V
Fitment: 4 Pin
No Load Speed: 6,000-16,000/min
Oscillating Angle: 3.2º
Weight: 0.74kg
Hex Key
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Lithium Ion batteries and chargers
are covered by a 12 month warranty. Warranty excludes
consumable parts, for example: sanding pad, paper, blades etc.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
0817
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. FITTING & REMOVING ACCESSORIES
ACCESSORIES
WARNING! ENSURE THE TOOL IS SWITCHED OFF
AND THE BATTERY IS DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Removing Accessories
Fitting Accessories
2 Remove the accessory.
2 Place the accessory onto the
spindle making sure to align
the accessory with the pins on
the spindle.
1 Remove the drive
spindle hex screw and
washer by rotating anti-
clockwise using the hex
key.
1 Remove the drive spindle hex
screw and washer by rotating
anti-clockwise using the hex
key.
3 Screw the washer and hex screw into the drive spindle and tighten
with the hex key to secure the accessory in place.
1 2 3 4 5
6 7 8 9
CORDLESS MULTI FUNCTION TOOL
1 Accessory
2 Accessory Drive Spindle
3 On/Off Switch
4 Variable Speed Controls
5 Battery Seating
6 Sanding Pad
7 Sanding Sheets x 3
8 Scraper Blade
9 Straight Blade
10 Hex Key
10
BATTERY & CHARGER
This tool is compatible with all batteries and chargers from the
Ozito Home-12volt range.
2. BATTERY & CONTROLS 3. APPLICATIONS
OPERATION
Variable Speed Controls
Installing and Removing the Battery
1 To increase the speed
of the tool, press the “+”
variable speed button.
2 To decrease the speed
of the tool, press the “-”
variable speed button.
1 Slide the battery into the tool
until it clicks into place.
2 To remove, please the battery
release button and then slide
out of the tool.
1
2
3
4
5
Sanding
1 Ensure the accessory is
secure, and then start the tool
by pushing the on/off switch
forward.
2 Place the multi
function tool at on
the workpiece.
Note: Do not apply heavy pressure to the tool or tilt the sanding base
as this will wear out the sanding paper and may damage the
sanding pad.
With the sanding pad and sanding paper attached, the multi function
tool can be used on materials such as wood, plastic and painted
surfaces.
Changing Sand Paper
1. Align paper to pad and press
rmly to attach.
2. Carefuly peel paper off pad
from on of the corners.
On/Off Switch
1 To start the tool, push the on/
off switch forward, into the on
position.
2 To stop the tool, push the on/
off switch backward, into the
off position.
Produktspezifikationen
| Marke: | Ozito |
| Kategorie: | Multifunktionswerkzeuge |
| Modell: | ZLMFTS-012 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ozito ZLMFTS-012 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Multifunktionswerkzeuge Ozito
9 Oktober 2024
6 Juli 2024
Bedienungsanleitung Multifunktionswerkzeuge
- Multifunktionswerkzeuge Makita
- Multifunktionswerkzeuge Parkside
- Multifunktionswerkzeuge Vonroc
- Multifunktionswerkzeuge AEG
- Multifunktionswerkzeuge FERM
- Multifunktionswerkzeuge Skil
- Multifunktionswerkzeuge Trotec
- Multifunktionswerkzeuge Einhell
- Multifunktionswerkzeuge Worx
- Multifunktionswerkzeuge Dremel
- Multifunktionswerkzeuge Leatherman
- Multifunktionswerkzeuge Powerplus
Neueste Bedienungsanleitung für -Kategorien-
16 Oktober 2024
16 Oktober 2024
15 Oktober 2024
11 Oktober 2024
14 Juli 2024
14 Juli 2024
9 Juli 2024
7 Juli 2024
7 Juli 2024
4 Juli 2024