Ozito SDA-1100U Bedienungsanleitung

Ozito Drehmaschine SDA-1100U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito SDA-1100U (3 Seiten) in der Kategorie Drehmaschine. Dieser Bedienungsanleitung war für 40 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/3
size 445 x 210 mm
Danger! - Read the operating instructions to re-
duce the risk of inquiry
Caution! Wear ear-muff s. The impact of noise
can cause damage to hearing.
Caution! Wear safety goggles. Sparks gene-
rated during working or splinters, chips and dust
emitted by the device can cause loss of sight.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes
SDA-1100U
GB Additonal operating & safety instructions 3.6V Lock & Load Screwdriver
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts*
Consumables* Bit inserts
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Plea-
se ensure that you provide a precise description of the problem and answer the following questions in all
cases:
• Did the equipment work at all or was it defective from the beginning?
• Did you notice anything (symptom or defect) prior to the failure?
• What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Yang/Product-ManagementWeichselgartner/General-Manager
explains the following conformity according to EU directives and norms for
the following product
3.6V Lock & Load screwdriver SDA-1100U / Charger for SDA-1100U (Ozito)
2014/29/EU
2005/32/EC_2009/125/EC
2014/35/EU
2006/28/EC
X 2014/30/EU
2014/32/EU
2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC
89/686/EC_96/58/EC
X 2011/65/EU
X 2006/42/EC
Annex IV
Notifi ed Body:
Notifi ed Body No.:
Reg. No.:
2000/14/EC_2005/88/EC
Annex V
Annex VI
Noise: measured LWA = dB (A); guaranteed LWA = dB (A)
P = KW; L/Ø = cm
Notifi ed Body:
2004/26/EC
Emission No.:
Standard references: EN 60745-1; EN 60745-2-2; EN 55014-1; EN 55014-2;
EN 61000-3-2; EN 61000-3-3; EN 60335-1; EN 60335-2-29; EN 62233
Landau/Isar, den 01.06.2016
First CE: 16 Archive-File/Record: NAPR014392
Art.-No.: 44.722.80 I.-No.: 11016 R. GehardDocuments registrar:
Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar
Declaration of confi rmity
size 445 x 210 mm
Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
• Open the packaging and take out the equip-
ment with care.
• Remove the packaging material and any
packaging and/or transportation braces (if
available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for
transport damage.
• If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
Proper use
The cordless screwdriver is designed for tigh-
tening and removing screws.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Technical data
Motor power supply: ...............................3.6 V DC
Idling speed: ............................................ 210/min
Clockwise/Counter-clockwise: ....................... Yes
Charge voltage for rechargeable battery: ..6 V DC
Charge current for rechargeable battery: ..300 mA
Battery charger supply voltage: ............................
................................................ 230-240 V ~ 50 Hz
Charging time: ..................................max. 5 hours
Battery type: ................................................ Li-Ion
Weight: ..................................................... 0.73 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
LpA sound pressure level ....................62.3 dB(A)
KpA uncertainty ........................................... 3 dB
LWA sound power level ......................73.3 dB(A)
KWA uncertainty .......................................... 3 dB
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Total vibration values (vector sum of three
directions) determined in accordance with
EN 60745.
Screwing without hammer action
Vibration emission value ah 2.5 m/s≤2
K uncertainty = 1.5 m/s2
The specifi ed vibration value was established in
accordance with a standardized testing method.
It may change according to how the electric
equipment is used and may exceed the specifi ed
value in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for
initial assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
• Only use appliances which are in perfect wor-
king order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever
necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in ac-
cordance with instructions, certain residual
risks cannot be rules out. The following ha-
zards may arise in connection with the equip-
ment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protecti-
on is used.
3. Health damage caused by hand-arm vibra-
tions if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
For EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EC
concerning old electric and electronic equipment
and its implementation in national laws, old elec-
tric power tools have to be separated from other
waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to
the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.
This consignment contains lithium-ion batteries.
In accordance with special provision 188 this
consignment is not subject to the ADR regula-
tions. Handle with care. Danger of ignition in case
of damage to the consignment package. If the
consignment package is damaged: Check and
if necessary repackage. For further information
contact: 0049 1807 10 20 20 66 (fi xed network
14 ct/min, mobile phone max. 42 ct/min) Outside
Germany charges will apply instead for a regular
call to a landline number in Germany.

Produktspezifikationen

Marke: Ozito
Kategorie: Drehmaschine
Modell: SDA-1100U

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito SDA-1100U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Drehmaschine Ozito

Ozito

Ozito SDL-5000U Bedienungsanleitung

14 Februar 2024
Ozito

Ozito SDU-5100U Bedienungsanleitung

13 Januar 2024
Ozito

Ozito SDA-1100U Bedienungsanleitung

7 Juli 2023
Ozito

Ozito OSDK-536 Bedienungsanleitung

9 Oktober 2022

Bedienungsanleitung Drehmaschine

Neueste Bedienungsanleitung für -Kategorien-

Bavaria By Einhell

Bavaria By Einhell BSD 3.6 Bedienungsanleitung

26 Juni 2024
Bavaria By Einhell

Bavaria By Einhell BDY 720 E Bedienungsanleitung

26 Juni 2024
Milwaukee

Milwaukee IPWE 520 R Bedienungsanleitung

21 Juni 2024
Hazet

Hazet 9230-010 Bedienungsanleitung

18 Juni 2024
Hazet

Hazet 9230-2 Bedienungsanleitung

18 Juni 2024
Hazet

Hazet 9230-2/4 Bedienungsanleitung

18 Juni 2024
Hazet

Hazet 9213-1000 Bedienungsanleitung

18 Juni 2024
Hazet

Hazet 9212-3 Bedienungsanleitung

18 Juni 2024
Hazet

Hazet 9022 P-XLG Bedienungsanleitung

18 Juni 2024
Hazet

Hazet 9212-1000 Bedienungsanleitung

18 Juni 2024