Ozito PXRDS-300 Bedienungsanleitung

Ozito Radio PXRDS-300

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Ozito PXRDS-300 (8 Seiten) in der Kategorie Radio. Dieser Bedienungsanleitung war fĂŒr 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
WHAT’S IN THE BOX
Cordless Radio
400mm Auxiliary Cable
3 x AAA Batteries
SPECIFICATIONS
Input: 18V
AM Frequency: 522-1620KHz
FM Frequency: 87.5-108MHz
Auxiliary Jack: 3.5mm
Speaker Output: 3W
Weight: 0.6kg
CORDLESS
RADIO
INSTRUCTION MANUAL
ozito.com.au
PXRDS-300
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
0416
WARNING
The following actions will result in the warranty being
void.
‱ If the tool has been operated on a supply voltage other than that specied
on the tool.
‱ If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
‱ Failure to perform maintenance as set out within the instruction manual.
‱ If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
10
5
9 10
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER (sold separately)
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
KNOW YOUR PRODUCT SETUP & PREPARATION
1. BATTERY & CHARGING
1 Control Panel
2 On/Off Switch
3 AAA Battery Compartment
4 Speaker
5 Carry Handle
6 LCD Display Screen
7 3.5mm Auxiliary Jack
8 Rear MP3 Player/Phone
Holder (not shown)
CORDLESS RADIO
The purchased battery will be shipped in a low charge condition, and requires charging
prior to use. Allow several cycles of charging and discharging (through use of the tool)
for the battery to reach its optimum performance / runtime.
1 Connect the charger into a mains power outlet.
4 The charger LED will illuminate
red signifying that the battery is
charging.
3 With the charger sitting on a at
surface, align the raised ribs on
the battery with the recess in the
charger and slide onto the charger
ensuring a rm connection.
2 The charger LED will ash green
showing power is being supplied
to the charger.
5 The charger LED will illuminate
green once the battery is fully
charged.
Charging your lithium ion battery - Fast Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Flashing) Battery is charging (low charge)
RED (Illuminated) Battery is charging (mid charge)
GREEN (Illuminated) Battery is fully charged
BOTH(Illuminated) Battery pack is too hot or too cold (charging will begin
automatically when battery reaches correct charging
temperature).
BOTH (Flashing) Defective battery. Never charge a defective battery
pack!
Remove battery pack from charger.
1 2 43 6 7 8
9 400mm Auxiliary
Cable
10 3 x AAA Batteries
CAUTION: THE CHARGER FOR THIS PRODUCT SHOULD
BE PROTECTED BY A RESIDUAL CURRENT DEVICE
(RATED AT 30mA OR LESS).
2. BATTERY INSTALLATION
Battery Charge Indicator
The purchased battery is equipped with a
battery charge indicator to show the state of
the battery charge.
Press the charge indicator button and look to
see which LED lights.
Battery requires
immediate charging
Low state of charge, requires charging soon.
Mid state of charge
Full state of charge.
Note: The battery needs to be removed from the tool to check the state of charge.
1 Connect the charger into a mains power outlet.
4 The charger LED will illuminate red signifying that the battery is charging.
3 With the battery sitting on a at
surface, align the raised ribs on the
battery with the recess in the charger
and slide onto the battery ensuring a
rm connection.
2 The charger LED will ash green
showing power is being supplied
to the charger.
5 When removing the charger from the
battery, rst press the battery release
tab, then slide the charger from its
position.
Charging your lithium ion battery - Eco Charger
Charger LED Indicator
LED Indicator Situation
GREEN (Flashing) Stand By (no battery pack is inserted)
RED (Illuminated) Battery is charging (low charge)
GREEN (Illuminated) Battery is fully charged
RED (Flashing) Battery or Charger fault
RED & GREEN (Flashing) Battery pack is too hot or too cold (remove battery from
charger and store at room temperature 20ÂșC. Insert
battery again when at correct charging temperature). If
this happens again, the battery is defective and needs
to be replaced.
Installing AAA Batteries (for clock & memory function)
Installing the 18V Battery Pack
1. AAA Batteries sit in
compartment at base
of radio housing. AAA
batteries must be
installed prior to 18V
battery pack.
1. Holding the radio
housing, slide the
battery into the base
of the radio until it
clicks into place.
Removing the Battery Pack
1. Press down on the
battery release
button.
2. Open AAA battery
compartment
housing
3. Install AAA batteries
2. Holding the radio
housing, slide the
battery pack out.

Produktspezifikationen

Marke: Ozito
Kategorie: Radio
Modell: PXRDS-300

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXRDS-300 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Radio Ozito

Ozito

Ozito PXRDS-300 Bedienungsanleitung

26 Juli 2024

Bedienungsanleitung Radio

Neueste Bedienungsanleitung fĂŒr -Kategorien-

Ruarkaudio

Ruarkaudio Rseven Bedienungsanleitung

16 Oktober 2024
Ruarkaudio

Ruarkaudio MR1 Bedienungsanleitung

16 Oktober 2024
Denver

Denver TWE-55B Bedienungsanleitung

15 Oktober 2024
AudioSonic

AudioSonic CL-1486 Bedienungsanleitung

14 Oktober 2024
Sangean

Sangean DPR-39 Bedienungsanleitung

14 Oktober 2024
Sangean

Sangean RCR-9 Bedienungsanleitung

14 Oktober 2024
PerfectPro

PerfectPro Dabbox Bedienungsanleitung

13 Oktober 2024
Uniden

Uniden UH45CP Bedienungsanleitung

12 Oktober 2024
Sencor

Sencor SIR 5000WDB Bedienungsanleitung

11 Oktober 2024
AEG

AEG KRC 4350 BT Bedienungsanleitung

10 Oktober 2024