Ozito PXMC-0182 Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXMC-0182 (6 Seiten) in der Kategorie Grubber. Dieser Bedienungsanleitung war für 20 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
STANDARD EQUIPMENT
PXMC-0182
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V x 2
No Load Speed: 140/min
Working Width: 280mm
Tine Diameter: 200mm
Noise Rating: 93dB
IP Class: IPX1
Tool Weight: 8.2kg
ozito.com.au
0421
Upper Handle, Cultivator Body
Lower Handle, Wheels &
Cover
Handle Securing Set x 4,
Cable Clips x 2
CORDLESS
CULTIVATOR
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts, for example: Tines, drag bar.
Safety Key & Drag Bar
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
“Click”
Fitting the Wheels
1. Using a screwdriver (not included)
remove the screw and at washer
from the axle, place the wheel
on the axle and secure with the
washer and screw.
Note: Ensuring that the at inner
diameter of the wheel is facing
outwards. This allows the wheel
covers to be tted.
2. Aline the tabs on the inside of the wheel cover with the holes in the wheel,
push the wheel cover onto the centre of the wheel so it clicks in place.
3. Repeat this process for the second wheel.
Fitting the Handles
1. Place the lower handle onto the
cultivator body and secure using two
of the handle securing sets. The knobs
should be positioned on the inside of
the frame. Tighten them securely.
2. Place the upper handle which
there are three holes, to the
upper end of the lower handle.
Select the appropriate hole
for the height of the user. Take
care not to pinch the cable.
3. Secure using two of the
remaining handle securing
sets.
1. Lock-Off Button
2. Upper Handle
3. Start/Stop Lever
4. Lower Handle
5. Securing Latch
6. Battery Cover
7. Locking Pin
8. Tines
9. Drag Bar
10. Safety Key
11. Wheels
12. Covers
13. Cable Clips
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
CORDLESS CULTIVATOR
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1 2 3
4
5
6
7
8 9
10
WARNING! ENSURE THE TOOL IS SWITCHED OFF
AND BATTERIES ARE DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
After removing the cultivator from the carton, check that the cultivator has not
been damaged. Unpack the contents.
11 12 13
2. PREPARATION
Securing the Cable
Ensure the cable follows the handle smoothly from the switch to the body of
the cultivator.
1. Locate cord on outside of handle.
Push the supplied cable clips over
the cable and onto the handle to
secure in place.
Note: Care should be taken not to
impinge cable when folding down
the handle.
Fitting the Drag Bar
The drag stake is used to regulate the depth of the turning cultivator tines. It
also serves as a brake, slowing the cultivator’s forward motion, enabling the
tines to penetrate the soil.
1. Pull out the split pin and remove
the pin. Push in the drag bar and
x in position with the pin and
split pin.
1. The transport wheels
can be adjusted into one
of two positions. When
tilling, adjust the wheels
so that they are set within
the top position. The
equipment must be moved
into operating position
before you begin with your
work.
2. When not tilling, the
transport wheels are used
to move the mini cultivator
around. Adjust the wheels
so that they are set within
the lower position.
3. Adjusting the wheel height is achieved by push the locking pin in and swing
the wheel unit up or down until the locking pin engages.
WHEEL HEIGHT
FOR TILLING
Adjusting the Wheel Height
WHEEL HEIGHT
FOR TRANSPORTING
WARNING! ENSURE THE TOOL IS SWITCHED OFF
AND BATTERIES ARE DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Produktspezifikationen
| Marke: | Ozito |
| Kategorie: | Grubber |
| Modell: | PXMC-0182 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ozito PXMC-0182 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Grubber Ozito
9 Juli 2024
Bedienungsanleitung Grubber
Neueste Bedienungsanleitung für -Kategorien-
12 Juli 2024
12 Juli 2024
6 Juli 2024
5 Juli 2024
5 Juli 2024
5 Juli 2024
5 Juli 2024
4 Juli 2024