Ozito PXBAGS-125 Bedienungsanleitung

Ozito Schleifmaschine PXBAGS-125

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito PXBAGS-125 (8 Seiten) in der Kategorie Schleifmaschine. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
STANDARD EQUIPMENT
PXBAGS-125
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
No Load Speed: 8,500/min
Disc Diameter: 125mm (5”)
Spindle: M14
Weight: 1.74kg
ozito.com.au
1121
Angle Grinder
Side Handle, Grinding Guard &
Pin Wrench
Grinding Disc
125MM ANGLE
GRINDER
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Fitting The Side Handle
1. To t, screw the side handle
clockwise into 1 of 2 handle
positions.
2. To remove, screw the handle
anti-clockwise.
Fitting The Safety Guard
1. Loosen the safety guard locking lever
to allow it to spin.
2. Align the notches, rotate the
guard into the desired position
and secure in place with the
locking lever.
WARNING! DO NOT OPERATE THE ANGLE GRINDER
WITHOUT THE SAFETY GUARD FITTED AS POSSIBLE
INJURIES COULD OCCUR.
1. Spindle Lock
2. Side Handle
3. Lock On Slide Switch
4. Dust Guard / Ventilation Mesh
5. Battery Seating
6. Sure Grip Handle
7. Grinding Guard
8. Pin Wrench
9. Guard Locking Lever
10. Grinding Disc
This tool is compatible with all batteries & chargers from the Ozito PXC range.
For optimal performance, we recommend the use of a 3.0Ah battery or higher to
operate this PXC tool.
BRUSHLESS 125MM ANGLE GRINDER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1 2 3 4
568 799
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
5. When assembling the outer ange, ensure you select the correct
orientation to suit the type of disc being tted.
Grinding disc: Place outer
flange with the raised lip
upwards.
Cutting disc: Place outer
flange with the raised lip
downwards.
WARNING! WHEN USING THE ANGLE GRINDER
WITH A CUTTING DISC, A CUTTING GUARD (NOT
SUPPLIED) MUST BE FITTED PRIOR TO OPERATION.
FAILURE TO DO SO MAY RESULT IN SERIOUS
INJURY.
6. Screw the ange back onto the
spindle and tighten using the
pin wrench while holding the
spindle lock down.
2. FITTING THE DISC
1. Pull the pin wrench out from the side
handle.
2 . Depress and hold the spindle lock
to prevent the spindle rotating.
3. Align the pins of the pin wrench
to the ange holes and loosen by
rotating it anti-clockwise.
4. Remove the ange and replace
the grinding disc on the spindle.
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! ALWAYS WEAR GLOVES WHEN
CHANGING THE DISC OR GUARD. THE DISC, GUARD
AND WORKPIECE WILL BECOME HOT DURING USE.


Produktspezifikationen

Marke: Ozito
Kategorie: Schleifmaschine
Modell: PXBAGS-125

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito PXBAGS-125 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Schleifmaschine Ozito

Bedienungsanleitung Schleifmaschine

Neueste Bedienungsanleitung fĂźr -Kategorien-