Ozito OTAC-1570 Bedienungsanleitung
Ozito
Kompressor
OTAC-1570
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito OTAC-1570 (6 Seiten) in der Kategorie Kompressor. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
12V T WIN CYLINDER AIR COMPRESSOR
12V TWIN CYLINDER
AIR COMPRESSOR
70L/MIN 145PSI
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 276W
Input: 12V DC
Max. Current: 30A
S3: 25%
Flow Rate: 70L/min
Max. Pressure: 145psi (10bar)
Hose Length: 4m
Weight: 2.97kg
OTAC-1570
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: valve adapters
and accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
12V TWIN CYLIN DER AIR COMPR ES S OR
12V Twin Cylinder Air Compressor
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
4 6
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAUGE
kg/cm²
3 x Inflation Nozzles, Replacement
Fuse & Air Hose
Carry Bag
1219
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
ON OFF
12V TWIN CYLINDER AIR CO MPR ESSOR
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
46
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAUGE
kg/cm²
Attaching The Air Hose
1. Retract and hold the sleeve
of the Nitto coupler on the air
hose.
2. Insert the Nitto tting of the
tool hose and release the
Nitto coupler sleeve. The Nitto
coupling should click into
place.
3. Check that the tting is secure by tugging gently on the connector.
If the hose detaches, repeat steps 1 & 2, pushing the Nitto tting
rmly into the coupler.
Using An Ination Nozzle
There is a storage container on the unit for the ination nozzles when
not they are not in use.
1. Pull o the lid on the nozzle
storage compartment.
2. Select the appropriate ination nozzle based on the air inlet of the
object to be inated.
3. Screw the ination nozzle
onto the tyre chuck on the air
hose.
1. On/O Switch
2. Nozzle Storage Container
3. Carry Handle
4. Tool Hose
5. Quick Connect Hose Fitment
6. Battery Terminal Clamp (+)
7. Battery Terminal Clamp (-)
8. Inline Fuse
12V TWIN CYLINDER AIR COMPRESSOR
ACCESSORIES
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
9. 3 x Ination Nozzles
10. Replacement Fuse
11. Quick Connect Hose Fitment
12. Pressure Hose
13. Pressure Gauge
14. Tyre Chuck
a.
b.
2
11 13
4
3
9 10 12
1
78
14
6 5
WARNING! ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
Connecting The Compressor To A Car Battery
1. Ensure the on/o switch is in
the o ‘0’ position.
2. With the car engine running,
connect the red battery
terminal clamp to the positive
(+) pole on your vehicle
battery.
3. Connect the black battery
terminal clamp to the negative
(-) pole on your vehicle
battery.
Disconnecting The Compressor From The Power Source
1. Turn o the air compressor by ipping the on/o switch to the o ‘0’
position.
2. Remove the black battery
terminal clamp from the
negative (-) pole of your
vehicle battery.
3. Remove the red battery
terminal clamp from the
positive pole (+) of the vehicle
battery.
Starting The Air Compressor
1. To turn on the air compressor,
press the on/o switch to the ‘I’
position.
Note: You may experience a slight
delay (approximately 0.5 seconds)
between the on/o switch being
ipped and the motor unit turning on.
This is a normal function while the
compressor pressurises the air in the hose.
2. To turn the unit o, press the on/o switch to the ‘0’ position.
Inline Fuse Protection
The air compressor is equipped with a 30A fuse between the unit and
the clamps. This feature is designed to protect you and the unit from
excessive current surges. If the fuse breaks during use, follow the
steps below to replace it.
1. Flip the on/o switch to the o
position, disconnect the black
clamp and then the red clamp
from the battery.
2. Flip open the lid on the fuse
housing. Remove the old fuse
and replace it with the supplied
replacement.
3. Replace the fuse housing lid.
WARNING! DO NOT CONTINUE USE OF THE UNIT IF
THE FUSE BREAKS AGAIN ON USE IMMEDIATELY
AFTER BEING REPLACED. THERE MAY BE A FAULT
WITH THE UNIT; CONTACT OZITO CUSTOMER
SERVICE.
In-Line Pressure Gauge
The in-line pressure gauge allows you to
conveniently monitor the air pressure in
the object during ination/deation without
needing to change between accessories.
Note: You will need to momentarily halt
ination/deation in order to obtain accurate
pressure readings as air owing in the hose
may throw o the readings.
2. APPLYING A POWER SOURCE 3. CONTROLS
OPERATION
+ -
+ -
a.
b.
+ -
ON OFF
ON OFF
a.
b.
0
25
50
75
100
125
150
0
(1)00
(3)00
(5)00
(7)00
(9)00
2
46
8
10
Lb/in²
(PSI)
kPA
(BAR)
PRESSURE GAU GE
kg/cm ²
WARNING! KEEP THE VEHICLE ENGINE RUNNING
WHILE USING THE AIR COMPRESSOR TO
PREVENT DISCHARGING THE VEHICLE BATTERY
COMPLETELY.
WARNING! ONLY USE THE AIR COMPRESSOR IN
WELL VENTILATED AREAS.
WARNING! ENSURE THE POWER CORD IS
UNCOILED AND FULLY EXTENDED TO AVOID
OVERHEATING THE POWER CORD. ENSURE
THAT IT DOES NOT GET TANGLED OR CAUGHT
IN ANY ROTATING PARTS WITHIN THE ENGINE
COMPARTMENT OF THE VEHICLE.
Produktspezifikationen
| Marke: | Ozito |
| Kategorie: | Kompressor |
| Modell: | OTAC-1570 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ozito OTAC-1570 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Kompressor Ozito
9 Oktober 2024
25 August 2024
10 August 2024
9 August 2024
8 August 2024
8 August 2024
7 August 2024
14 Juli 2024
26 Juni 2024
26 Juni 2024
Bedienungsanleitung Kompressor
- Kompressor Genius
- Kompressor SilverCrest
- Kompressor Makita
- Kompressor Bosch
- Kompressor Parkside
- Kompressor Vonroc
- Kompressor AEG
- Kompressor Technaxx
- Kompressor Black And Decker
- Kompressor Cocraft
- Kompressor FERM
- Kompressor Senco
- Kompressor Topcraft
- Kompressor Trotec
- Kompressor DeWalt
- Kompressor Einhell
- Kompressor Festool
- Kompressor Golden Age Project
- Kompressor Tacklife
- Kompressor Ultimate Speed
- Kompressor Xiaomi
- Kompressor Hikoki
- Kompressor Hitachi
- Kompressor Hyundai
- Kompressor Livoo
- Kompressor Hazet
- Kompressor Metabo
- Kompressor Stanley
- Kompressor Güde
- Kompressor Power Craft
- Kompressor Scheppach
- Kompressor Workzone
- Kompressor Bimar
- Kompressor Laica
- Kompressor Biltema
- Kompressor Meec Tools
- Kompressor Fieldmann
- Kompressor King Craft
- Kompressor Westfalia
- Kompressor Samson
- Kompressor Dedra
- Kompressor DURO
- Kompressor Merlin
- Kompressor Nilfisk
- Kompressor Silverline
- Kompressor Holzmann
- Kompressor MSW
- Kompressor Sthor
- Kompressor Herkules
- Kompressor Aerotec
- Kompressor Airpress
- Kompressor Robust
- Kompressor ROWI
- Kompressor Wiltec
- Kompressor Zipper
- Kompressor EUFAB
- Kompressor Yato
- Kompressor Pansam
- Kompressor Omnitronic
- Kompressor Bavaria
- Kompressor Milwaukee
- Kompressor Toolcraft
- Kompressor Osram
- Kompressor CMI
- Kompressor Craftsman
- Kompressor Powerplus
- Kompressor Alphacool
- Kompressor Danfoss
- Kompressor Auto Joe
- Kompressor Boss
- Kompressor Carel
- Kompressor Sun Joe
- Kompressor DBX
- Kompressor Draper
- Kompressor PreSonus
- Kompressor Porter-Cable
- Kompressor Duro Pro
- Kompressor Emax
- Kompressor Global
- Kompressor Kibani
- Kompressor Kraftronic
- Kompressor OKAY
- Kompressor Steren
- Kompressor Freeman
- Kompressor Avantco
- Kompressor Eventide
- Kompressor Abac
- Kompressor SPL
- Kompressor Truper
- Kompressor Unimac
- Kompressor Hamron
- Kompressor California Air Tools
- Kompressor Full Boar
- Kompressor Rolls
- Kompressor Lindell Audio
- Kompressor Prowork
- Kompressor Creemers
- Kompressor Proviel
- Kompressor Hulk Power
- Kompressor Coolado
- Kompressor Anova
- Kompressor POWERNAIL
- Kompressor Airman
- Kompressor TOOLMATE
- Kompressor Cartrend
- Kompressor Outbac
- Kompressor Contimac
- Kompressor HBM
- Kompressor Arebos
- Kompressor Narvon
- Kompressor Pretul
- Kompressor Pro-Lift
- Kompressor Aomni
- Kompressor Numax
- Kompressor Ilsco
- Kompressor ExelAir
- Kompressor TJM
- Kompressor TAURUS Titanium
Neueste Bedienungsanleitung für -Kategorien-
15 Oktober 2024
15 Oktober 2024
14 Oktober 2024
9 Oktober 2024
28 September 2024
17 September 2024
17 September 2024
14 September 2024
14 September 2024
9 September 2024