Ozito MSK-001 Bedienungsanleitung
Ozito
Schleifmaschine
MSK-001
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Ozito MSK-001 (6 Seiten) in der Kategorie Schleifmaschine. Dieser Bedienungsanleitung war fĂźr 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/6
MULTI
SANDER
200W
INSTRUCTION MANUAL
SPECIFICATIONS
Motor: 200W
No Load Speed: 7,000-12,000/min
Paper Fitment: Hook & Loop
Paper Size: 145x100mm (Triangular)
125mm (Circular)
183x92mm (1/3 Sheet)
Weight: 1.38kg
MSK-001
STANDARD EQUIPMENT
Multi Sander
3 x Sanding Paper
Dust Canister
3 x Sanding Base
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: carbon
brushes, dust bags, backing pads and sanding sheets.
WARNING
The following actions will result in the warranty being void.
⢠If the tool has been operated on a supply voltage other
than that speciďŹed on the tool.
⢠If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
⢠Failure to perform maintenance as set out within the
instruction manual.
⢠If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head OfďŹce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The beneďŹts provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0519
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
1. CHANGING SANDING BASES
6 Random Orbital Sanding Base
7 Random Orbital Sanding
Paper x 1 (120Grit)
8 Sheet Sanding Base
9 Sheet Sanding Paper x 1
(60Grit)
10 Detail Sanding Base
11 Detail Sanding Paper x 1
(80Grit)
ACCESSORIES
1 Variable Speed Dial
2 Hook & Loop Sanding Pad
3î On/Oó°¨îSwitch
4 Sure Grip Handle
5 Dust Canister
MULTI SANDER
SETUP & PREPARATION
WARNING: ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING
ANY OF THE FOLLOWING OPERATIONS..
WARNING: ENSURE THAT THE SCREWS ARE NOT
TIGHTENED WITH EXCESSIVE FORCE. DO NOT
USE A POWER DRILL FOR THIS OPERATION.
1 2 3 4 5
6 7 8 109 11
TheîMultiîSanderîcomesîwithî3îsandingîbasesîthatîcanîbeîîżttedîtoî
the tool, including:
⢠Circular random orbital sanding base (125mm)
⢠Triangular detail sanding base (145x100mm)
⢠Rectangular 1/3 sheet sanding base (183x91mm)
Note:îBeforeîremovingîorîîżttingîtheîsandingîbases,îanyîsandpaperî
must be removed so that you can access the mounting screws.
Removing Sanding Bases
Fitting Sanding Bases
1 Remove the 4 screws from the
base of the sanding pad by
rotating anti-clockwise.
1 Place the sanding base onto
the tool, aligning the mounting
holes and the aligning pins.
Note: The circular sanding base
does not require aligning pins.
2 Pull the sanding base
and aligning pins away
from the tool to remove.
Note: The base aligning
pins can sometimes get
stuck in the base of the tool.
2 Tighten the 4 screws into
the base of the sanding
pad with a screwdriver to
secure in place.
2. DUST CANISTER2. FITTING SANDING PAPER
1 Align the holes on the sanding sheet with the holes on the
sanding pad and then press onto the pad.
3 To empty, lift the lid of the dust
canister over a bin and then
empty.
Note: Ensure the lid is secured
tightly back onto the container
after emptying.
2 Push the dust canister
hard onto the dust
extraction port.
Note: You should hear a
clickîonceîîżttedîcorrectly.
4 Push the dust canister
hard onto the dust
extraction port until it
clicks into place.
2 Replace the sanding sheet when it is worn.
3 Replace hook &
loop backing pad
when worn (see
maintenance section).
InstallingHook and Loop Paper Fitment
Emptying
1/3 Sheet Sanding Clamp System
1 Empty dust canister when it
becomes 1/3 full for optimum
dust extraction.
1 Ensure that the lid is pressed
tightly onto the container.
Note: You should hear a click
onceîîżttedîcorrectly.
1 Unhook one of the clamp
springs and insert the front of
the sand paper, ensuring the
holes in the paper align with
the holes in the pad.
The rectangular sheet sanding pad also features a clamping system
toîallowîforîîżttingî1/3îsheetîsandingîpaperîthatîdoesînotîhaveîhookî
andîloopîîżtment.
1/3 Full
a
b
2 Position over a bin and
press the release tab at
the top of the lid. Then
pull the dust canister
away from the extraction
port.
2 Lock the clamp spring
and repeat for the 2nd
spring, ensuring the
paper is pulled tightly.
a
b
Produktspezifikationen
| Marke: | Ozito |
| Kategorie: | Schleifmaschine |
| Modell: | MSK-001 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ozito MSK-001 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Schleifmaschine Ozito
28 September 2024
16 August 2024
11 August 2024
21 Juli 2024
13 Juli 2024
11 Juli 2024
9 Juli 2024
7 Juli 2024
26 Juni 2024
26 Juni 2024
Bedienungsanleitung Schleifmaschine
- Schleifmaschine SilverCrest
- Schleifmaschine Cotech
- Schleifmaschine Makita
- Schleifmaschine Bosch
- Schleifmaschine Flex
- Schleifmaschine Parkside
- Schleifmaschine Vonroc
- Schleifmaschine AEG
- Schleifmaschine Gorenje
- Schleifmaschine Mesko
- Schleifmaschine Black And Decker
- Schleifmaschine Cocraft
- Schleifmaschine FERM
- Schleifmaschine Ryobi
- Schleifmaschine Skil
- Schleifmaschine Topcraft
- Schleifmaschine Trotec
- Schleifmaschine Maestro
- Schleifmaschine Eibenstock
- Schleifmaschine Hilti
- Schleifmaschine Bort
- Schleifmaschine DeWalt
- Schleifmaschine Einhell
- Schleifmaschine Elu
- Schleifmaschine Festool
- Schleifmaschine Maktec
- Schleifmaschine Worx
- Schleifmaschine Nuova Simonelli
- Schleifmaschine Hikoki
- Schleifmaschine Hitachi
- Schleifmaschine Hyundai
- Schleifmaschine Hazet
- Schleifmaschine Kress
- Schleifmaschine Max
- Schleifmaschine Metabo
- Schleifmaschine Stanley
- Schleifmaschine GĂźde
- Schleifmaschine Scheppach
- Schleifmaschine Workzone
- Schleifmaschine United Office
- Schleifmaschine Meec Tools
- Schleifmaschine AquaPur
- Schleifmaschine Dremel
- Schleifmaschine Fieldmann
- Schleifmaschine King Craft
- Schleifmaschine Proxxon
- Schleifmaschine Westfalia
- Schleifmaschine Profitec
- Schleifmaschine Dedra
- Schleifmaschine DURO
- Schleifmaschine Graphite
- Schleifmaschine Pattfield
- Schleifmaschine Silverline
- Schleifmaschine Holzmann
- Schleifmaschine Florabest
- Schleifmaschine Herkules
- Schleifmaschine Aerotec
- Schleifmaschine Huvema
- Schleifmaschine Stomer
- Schleifmaschine Yato
- Schleifmaschine Baumr-AG
- Schleifmaschine Genesis
- Schleifmaschine ABB
- Schleifmaschine Batavia
- Schleifmaschine Dolmar
- Schleifmaschine Bavaria
- Schleifmaschine BrĂźder Mannesmann
- Schleifmaschine Milwaukee
- Schleifmaschine Toolcraft
- Schleifmaschine Fein
- Schleifmaschine Powertec
- Schleifmaschine Craftsman
- Schleifmaschine Defort
- Schleifmaschine Powerplus
- Schleifmaschine Alpha Tools
- Schleifmaschine Kawasaki
- Schleifmaschine Solo
- Schleifmaschine Ridgid
- Schleifmaschine Porter-Cable
- Schleifmaschine Dolmar(Makita)
- Schleifmaschine Duro Pro
- Schleifmaschine Ergofix
- Schleifmaschine Felisatti
- Schleifmaschine Gamma
- Schleifmaschine Global
- Schleifmaschine Goon
- Schleifmaschine Gude Pro
- Schleifmaschine Tanaka
- Schleifmaschine Bunn
- Schleifmaschine Neo
- Schleifmaschine Meister Craft
- Schleifmaschine Malmbergs
- Schleifmaschine Yamato
- Schleifmaschine Truper
- Schleifmaschine Victoria Arduino
- Schleifmaschine RIKON
- Schleifmaschine Einhell Bavaria
- Schleifmaschine Proviel
- Schleifmaschine Budget
- Schleifmaschine McKenzie
- Schleifmaschine Kwb
- Schleifmaschine Ergotools Pattfield
- Schleifmaschine FIXIT
- Schleifmaschine THUN
- Schleifmaschine Rodcraft
- Schleifmaschine Bavaria By Einhell
- Schleifmaschine ATI-ZDL
- Schleifmaschine Gladiator
- Schleifmaschine Handwerk
Neueste Bedienungsanleitung fĂźr -Kategorien-
15 Oktober 2024
14 Oktober 2024
13 Oktober 2024
8 Oktober 2024
7 Oktober 2024
5 Oktober 2024
3 Oktober 2024
3 Oktober 2024
2 Oktober 2024
2 Oktober 2024