Ozito ECS-406A Bedienungsanleitung

Ozito Säge ECS-406A

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito ECS-406A (8 Seiten) in der Kategorie Säge . Dieser Bedienungsanleitung war für 15 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/8

ELECTRIC

CHAINSAW

2200W 406mm

INSTRUCTION MANUAL

SPECIFICATIONS

Power: 2200W

Voltage: 220V – 240V ~ 50Hz

Bar Type: Oregon 406mm (16”)

Chain Pitch: 9.53mm (3/8”)

Sharpening File: 3.96mm (5/32”)

Chain Speed: 15m/s

Oil Feed: Automatic

Oil Tank Capacity: 160ml

Weight: 5.6kg

ECS-406A

WHAT’S IN THE BOX

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE WITH

YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO

RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE

HELPLINE:

Australia 1800 069 486

New Zealand 0508 069 486

3 YEAR REPLACEMENT WARRANTY

Your product is guaranteed for a period of 36 months from

the original date of purchase. If a product is defective it will

be replaced in accordance with the terms of this warranty.

Warranty excludes consumable parts, for example: guide bar, chain

and included accessories.

WARNING

The following actions will result in the warranty being void.

• If the tool has been operated on a supply voltage other

than that specied on the tool.

• If the tool shows signs of damage or defects caused

by or resulting from abuse, accidents or alterations.

• Failure to perform maintenance as set out within the

instruction manual.

• If the tool is disassembled or tampered with in any way.

• Professional, industrial or high frequency use.

WARRANTY

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL

AND ANSWER ANY QUESTIONS YOU MAY

HAVE RELATING TO THE WARRANTY POLICY

OR PROCEDURE.

OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.

The benets provided under this warranty are in addition

to other rights and remedies which are available to you at law.

Our goods come with guarantees that cannot be excluded

at law. You are entitled to a replacement or refund for a major

failure and for compensation for any other reasonably foreseeable

loss or damage. You are also entitled to have the goods repaired

or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Generally you will be responsible for all costs associated with

a claim under this warranty, however, where you have suffered

any additional direct loss as a result of a defective product you

may be able to claim such expenses by contacting our customer

service helpline above.

ozito.com.au

0814

Electric Chainsaw

Guide Bar Cover

Guide Bar

Chain

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

Fitting a chain and bar

1. Fully unscrew the side cover

lock by turning it in an anti-

clockwise direction.

2. Remove the side

cover.

3. Fit the chain over the guide bar,

making sure that the cutters are

facing in the direction of rotation.

4. Place the guide bar and chain

in position, ensuring that the

chain is around sprocket wheel

(A). Also ensure that the pin

(B) ts into the central slot in

the guide bar.

5. Pull the guide bar

forward until the

chain is closely

seated. Make sure

that all the drive

links are in the

groove of the bar.

6. Attach the side cover and secure

it with the side cover lock.

Note: Do not fully tighten the side cover lock until after

adjusting the chain tension.

1. Power cord

2. Cord retainer

3. Oil level window

4. Oil tank cap

5. Side cover

6. Chain tensioning dial

7. Side cover lock

8. Guide bar

9. Chain

10. Bucking spikes

11. Chain brake

12. Front handle

13. Lock-off switch

14. On/Off trigger

15. Rear handle

16. Chain bar cover

ELECTRIC CHAINSAW

ACCESSORIES

KNOW YOUR PRODUCT

1. GUIDE BAR & CHAIN

ASSEMBLY

CAUTION! ALWAYS WEAR GLOVES WHEN HANDLING

THE CHAIN AS IT IS VERY SHARP AND CAN CUT YOU

WHEN IT IS NOT MOVING.

1 3

1514

6 72

A B

WARNING! ENSURE THE CHAINSAW IS TURNED

OFF & DISCONNECTED FROM THE POWER

SUPPLY BEFORE PERFORMING ANY OF THE

FOLLOWING OPERATIONS.

Tensioning the chain

1. Unscrew the side cover

lock a few turns to ensure it is loose.

2. Adjust the chain tension with the

chain tensioning dial. Rotating the

dial downwards increases the tension

and rotating the dial up decreases the

chain tension.

The tension is correct when the chain

can be pulled 3mm away from the guide

bar when using your nger and thumb.

Do not over-tighten as this will reduce

the life of the chain and guide bar.

3. Tighten the side cover lock.

3. LUBRICATION2. CHAIN TENSION

SETUP & PREPARATION

3mm gap is

the ideal tension

IMPORTANT! THE CHAIN SHOULD BE ADJUSTED

BEFORE FIRST USE, AGAIN AFTER 2 3 MINUTES –

OF OPERATION AND RECHECKED AND ADJUSTED IF

NECESSARY AFTER EACH 30 MINUTES OF USE. TAKE

CARE NOT TO OVER TENSION THE CHAIN.

NOTE: ONLY USE OIL THAT IS EXPRESSLY LABELLED

“CHAIN BAR OIL”.

Filling with oil

1. Place the chainsaw on a at

surface and remove the oil

tank cap.

3. Ret cap and clean any

oil spillage.

4. Always ll the oil tank when the oil

level falls below the minimum mark

on the oil level window.

5. To check the lubricating system,

switch on the chainsaw and hold it

with the guide bar and chain above

some light coloured paper such as

newspaper. A steadily increasing

stain caused by oil spray shows the

lubricating system is working.

Chain bar oil may leak if the tool is

left for long periods. This is normal.

If the tool is to be left unused for an

extended time, drain the oil from

the tool. Rell before use.

2. Fill the tank with chain bar oil,

ensuring that no dirt enters the

tank. The capacity of the chain

oil tank is 160ml.

WARNING! TO PREVENT ACCIDENTAL STARTING,

ENSURE THAT THE CHAINSAW IS DISCONNECTED

FROM THE POWER SUPPLY BEFORE MAKING ANY

ADJUSTMENTS.

WARNING! ALL OF THE CHAIN LINKS MUST LIE

PROPERLY IN THE GROOVE OF THE GUIDE BAR. WARNING! NEVER START WORK UNLESS THE

CHAIN AND BAR ARE LUBRICATED.

Produktspezifikationen

Marke:	Ozito
Kategorie:	Säge
Modell:	ECS-406A

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito ECS-406A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Säge Ozito

Ozito SCMS-8STANDU Bedienungsanleitung

16 Mai 2024

Ozito TBS-2000 Bedienungsanleitung

24 Februar 2024

Ozito MSW-3000U Bedienungsanleitung

28 Januar 2024

Ozito MSW-3000 Bedienungsanleitung

18 Januar 2024

Ozito PXCCSS-018U Bedienungsanleitung

15 Januar 2024

Ozito ECS-406A Bedienungsanleitung

14 Januar 2024

Ozito CSW-7000 Bedienungsanleitung

14 Januar 2024

Ozito PXCMSS-210 Bedienungsanleitung

15 Dezember 2023

Ozito JSW-6100U Bedienungsanleitung

11 Dezember 2023

Ozito CSW-7000U Bedienungsanleitung

6 Dezember 2023

Bedienungsanleitung Säge

Neueste Bedienungsanleitung für -Kategorien-

Workzone WZTS 2000 Bedienungsanleitung

14 August 2024

Westfalia ASSG 18 Bedienungsanleitung

7 August 2024

Milwaukee M12 FUEL CHZ-602X Bedienungsanleitung

28 Juni 2024

Milwaukee M18 BSX-0 Bedienungsanleitung

28 Juni 2024

Milwaukee M12 FUEL CHZ-0 Bedienungsanleitung

28 Juni 2024

Milwaukee M12 FUEL CHZ-402C Bedienungsanleitung

28 Juni 2024

RIKON 10-110 Bedienungsanleitung

26 Juni 2024

RIKON 98-2600 Bedienungsanleitung

26 Juni 2024

RIKON 10-306 Bedienungsanleitung

26 Juni 2024

Einhell BT-CS 860 Kit Bedienungsanleitung

26 Juni 2024