Ozito ECS-1835 Bedienungsanleitung

Ozito Säge ECS-1835

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito ECS-1835 (8 Seiten) in der Kategorie Säge . Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/8
ELECTRIC
CHAINSAW
1800W 356mm
INSTRUCTION MANUAL
SPECIFICATIONS
Power: 1800W
Bar Length: 356mm (14”)
Cutting Length Max.: 325mm
Chain Pitch: 9.53mm (3/8”)
Sharpening File: 3.96mm (5/32”)
Chain Speed: 13.5m/s
Oil Feed: Automatic
Oil Tank Capacity: 160ml
Weight: 5.0kg
ECS-1835
WHAT’S IN THE BOX
WARRANTY
ozito.com.au
1217
Electric Chainsaw
Guide Bar Cover
Guide Bar
Chain
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: Guide bar, chain
and included accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specied on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Fitting a chain and bar
1. Fully unscrew the side cover
lock by turning it in an anti-
clockwise direction.
2. Remove the side
cover.
3. Fit the chain over the guide bar,
making sure that the cutters are
facing in the direction of rotation.
4. Place the guide bar and chain
in position, ensuring that the
chain is around sprocket wheel
(A). Also ensure that the pin
(B) ts into the guide bar. If it
does not t, it can be adjusted
slightly with the
chain tensioning
dial. The chain must
not slip off the bar
when you do this.
5. Pull the guide bar
forward until the
chain is closely
seated. Make sure that all the drive links are in the
groove of the bar.
6. Attach the side cover and secure
it with the side cover lock.
NOTE: Do not fully tighten the side cover lock until
after adjusting the chain tension.
1. Power cord
2. Cord retainer
3. Oil level window
4. Oil tank cap
5. Side cover
6. Chain tensioning dial
7. Side cover lock
8. Guide bar
9. Chain
10. Bucking spikes
11. Chain brake
12. Front handle
13. Lock-off switch
14. On/Off trigger
15. Rear handle
16. Chain bar cover
ELECTRIC CHAINSAW
ACCESSORIES
KNOW YOUR PRODUCT
1. GUIDE BAR & CHAIN
ASSEMBLY
CAUTION! ALWAYS WEAR GLOVES WHEN HANDLING
THE CHAIN AS IT IS VERY SHARP AND CAN CUT YOU
WHEN IT IS NOT MOVING.
+
1 3
11
16
8
13
9
1514
54
12
6 72
10
A B
WARNING! ENSURE THE CHAINSAW IS TURNED
OFF & DISCONNECTED FROM THE POWER
SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
Tensioning the chain
1. Unscrew the side cover
lock a few turns to ensure it is loose.
2. Adjust the chain tension with the
chain tensioning dial. Rotating the
dial downwards increases the tension
and rotating the dial up decreases the
chain tension.
The tension is correct when the chain
can be pulled 3mm away from the guide
bar when using your nger and thumb.
Do not over-tighten as this will reduce
the life of the chain and guide bar.
3. Tighten the side cover lock.
3. LUBRICATION2. CHAIN TENSION
SETUP & PREPARATION
3mm gap is
the ideal tension
IMPORTANT! THE CHAIN SHOULD BE ADJUSTED
BEFORE FIRST USE, AGAIN AFTER 2 3 MINUTES –
OF OPERATION AND RECHECKED AND ADJUSTED IF
NECESSARY AFTER EACH 30 MINUTES OF USE. TAKE
CARE NOT TO OVER TENSION THE CHAIN.
NOTE: ONLY USE OIL THAT IS EXPRESSLY LABELLED
“CHAIN BAR OIL”.
Filling with oil
1. Place the chainsaw on a at
surface and remove the oil
tank cap.
3. Ret cap and clean any
oil spillage.
4. Always ll the oil tank when the oil
level falls below the minimum mark
on the oil level window.
5. To check the lubricating system,
switch on the chainsaw and hold it
with the guide bar and chain above
some light coloured paper such as
newspaper. A steadily increasing
stain caused by oil spray shows the
lubricating system is working.
Chain bar oil may leak if the tool is
left for long periods. This is normal.
If the tool is to be left unused for an
extended time, drain the oil from
the tool. Rell before use.
2. Fill the tank with chain bar oil,
ensuring that no dirt enters the
tank. The capacity of the chain
oil tank is 160ml.
WARNING! TO PREVENT ACCIDENTAL STARTING,
ENSURE THAT THE CHAINSAW IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE MAKING ANY
ADJUSTMENTS.
WARNING! ALL OF THE CHAIN LINKS MUST LIE
PROPERLY IN THE GROOVE OF THE GUIDE BAR. WARNING! NEVER START WORK UNLESS THE
CHAIN AND BAR ARE LUBRICATED.

Produktspezifikationen

Marke: Ozito
Kategorie: Säge
Modell: ECS-1835

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito ECS-1835 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Säge Ozito

Ozito

Ozito SCMS-8STANDU Bedienungsanleitung

16 Mai 2024
Ozito

Ozito TBS-2000 Bedienungsanleitung

24 Februar 2024
Ozito

Ozito MSW-3000U Bedienungsanleitung

28 Januar 2024
Ozito

Ozito MSW-3000 Bedienungsanleitung

18 Januar 2024
Ozito

Ozito PXCCSS-018U Bedienungsanleitung

15 Januar 2024
Ozito

Ozito ECS-406A Bedienungsanleitung

14 Januar 2024
Ozito

Ozito CSW-7000 Bedienungsanleitung

14 Januar 2024
Ozito

Ozito PXCMSS-210 Bedienungsanleitung

15 Dezember 2023
Ozito

Ozito JSW-6100U Bedienungsanleitung

11 Dezember 2023
Ozito

Ozito CSW-7000U Bedienungsanleitung

6 Dezember 2023

Bedienungsanleitung Säge

Neueste Bedienungsanleitung fĂźr -Kategorien-

Workzone

Workzone WZTS 2000 Bedienungsanleitung

14 August 2024
Westfalia

Westfalia ASSG 18 Bedienungsanleitung

7 August 2024
Milwaukee

Milwaukee M12 FUEL CHZ-602X Bedienungsanleitung

28 Juni 2024
Milwaukee

Milwaukee M18 BSX-0 Bedienungsanleitung

28 Juni 2024
Milwaukee

Milwaukee M12 FUEL CHZ-0 Bedienungsanleitung

28 Juni 2024
Milwaukee

Milwaukee M12 FUEL CHZ-402C Bedienungsanleitung

28 Juni 2024
RIKON

RIKON 10-110 Bedienungsanleitung

26 Juni 2024
RIKON

RIKON 98-2600 Bedienungsanleitung

26 Juni 2024
RIKON

RIKON 10-306 Bedienungsanleitung

26 Juni 2024
Einhell

Einhell BT-CS 860 Kit Bedienungsanleitung

26 Juni 2024