Ozito DSR-2500U Bedienungsanleitung

Ozito Schleifmaschine DSR-2500U

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Ozito DSR-2500U (4 Seiten) in der Kategorie Schleifmaschine. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

DETAIL

SANDER

180W

SPECIFICATIONS

DSR-2500U

WHAT’S IN THE BOX

Detail Sander

20 x Sanding Paper

Dust Canister

WARNING!

• This tool may only be used for dry grinding/sanding operations.

• Always guide the power cable away from the back of the tool.

• Use of the tool on materials containing asbestos is prohibited.

• Always remove the plug from the power supply socket before carrying out any work

on the machine (cleaning the sander, changing the sandpaper, etc.).

• Always disconnect the machine by removing the plug from the socket, not by pulling

on the power cable.

• To protect your health, always wear safety goggles and a dust mask during sanding/

grinding work!

• Keep your workplace clean and well illuminated.

• Make sure that the workpiece is su󰀩ciently secured so that it cannot slip.

• Keep children away.

• For your own sake, keep the machine clean at all times and check it for signs of

damage each time after using it.

• Make sure that the switch is set to OFF before you insert the plug into the power

supply socket.

• Make sure of your footing, particularly when working on ladders and platforms.

• Harmful or toxic dust can be produced when working on wood or metal.

Touching or inhaling this dust can be harmful for the operator and other persons

nearby.

• If you discover any damage to the machine, use the exploded diagram and the

spare parts list to determine which parts need to be ordered from Customer Service.

• Important! Wear safety goggles and a dust mask.

Do not lose these safety instructions.

DETAIL SANDER SAFETY WARNINGS

ORIGINAL INSTRUCTIONS

ozito-diy.co.uk

iSC GmbH · Eschenstraße 6 · 94405 Landau /Isar · Germany

All of our products undergo strict quality checks to ensure that they reach

you in perfect condition. In the unlikely event that your device develops a

fault, please contact our service department at the address shown on this

guarantee card. You can also contact us by telephone using the customer

service number shown. Please note the following terms under which

guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the

manufacturer mentioned below promises to buyers of its new products

in addition to their statutory guarantee claims are not a󰀨ected by this

guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or

manufacturing faults on a product which you have bought from the

manufacturer mentioned below are limited to either the rectication of said

defects on the product or the replacement of the product, whichever we

prefer.

Please note that our devices are not designed for use in commercial, trade

or professional applications. A guarantee contract will not be created if the

device has been used by commercial, trade or industrial business or has

been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly

instructions or due to incorrect installation, a failure to follow the operating

instructions (for example connecting it to an incorrect mains voltage or

current type) or a failure to follow the maintenance and safety instructions

or by exposing the device to abnormal environmental conditions or by lack

of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example

overloading the device or the use or unapproved tools or accessories),

ingress of foreign bodies into the device (such as sand, stones or dust,

transport damage), the use of force or damage caused by external forces

(for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural

wear or tear or by normal use of the device.

4. Your Product is guaranteed for a period of 36 months from the original

date of purchase and is intended for DIY (Do It Yourself) use only. Warranty

excludes consumable parts. Guarantee claims should be submitted

before the end of the guarantee period within two weeks of the defect

being noticed. No guarantee claims will be accepted after the end of the

guarantee period. The original guarantee period remains applicable to the

device even if repairs are carried out or parts are replaced. In such cases,

the work performed or parts tted will not result in an extension of the

guarantee period, and no new guarantee will become active for the work

performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST

RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR

Please refer to the restrictions of this warranty concerning wearing parts,

consumables and missing parts as set out in the service information in

these operating instructions.

CUSTOMER SERVICE HELPLINE

GB: 0151 294 4488

IRL: 1850 882711

Ozito-diy.co.uk

WARRANTY

0917

MAINTENANCE TROUBLE SHOOTING

• Keep the ventilation vents of the sander clean at all times, if possible, prevent

foreign matter from entering the vents.

• After each use, blow air through the sander housing to ensure it is free from

all dust particles which may build up. Build up of dust particles may cause the

drill to overheat and fail.

• If the enclosure of the drill requires cleaning, do not use solvents but a moist

soft cloth only. Never let any liquid get inside the drill; never immerse any part

of the drill into a liquid.

Replacing the Hook & Loop Backing Pad

After considerable use, the hook and loop backing pad surface will become

worn, and must be replaced when it no longer o󰀨ers a rm grip. The

replacement backing pad can be ordered through the Special Orders Desk at

any Bunnings store.

1. To replace, remove the four philips head screws by rotating anti-clockwise.

2. Place new backing pad on the tool and retighten the four philips head

screws by rotating clockwise.

Note: Ozito Industries will not be responsible for any damage or injuries

caused by the repair of the tool by an unauthorised person or by mishandling

of the tool.

Sparking visible through the housing air vents

A small amount of sparking may be visible through the housing vents.

This is normal and does not indicate a problem.

Excessive sparking visible through the housing air vents

and/or the drill failing to operate

May indicate the carbon brushes have worn out and need to be replaced. Carbon

brushes should only be replaced by a qualied electrician or power tool repairer.

Sandpaper Selection

Selecting the correct grit of sandpaper is an important step in achieving

optimum results. Coarse grit will remove the most material. Finer grit will

produce a smoother nish. The condition of the workpiece will determine the

grit of the sandpaper to be used. The higher the grit number, the ner the

grade of sandpaper.

If the surface is rough, start with a coarse grit and sand until the surface is

uniform. Medium grit may then be used to remove scratches left by the coarser

grit. Finer grit is then used to nish the surface. Always continue sanding with

each grade of sandpaper until the surface is uniform.

MATERIAL APPROPRIATE GRIT

Coarse Sanding Fine Sanding

Paintwork 180 400

Wood: Softwood 60 240

Hardwood 60 180

Veneer 240 320

Note: If intermediate sanding is required, choose a grit rating between coarse and

ne. The above table is intended as a guide only. To ensure a satisfactory result,

a small, inconspicuous area should rst be tested to ensure the grit of sandpaper

chosen is suitable for the desired nish.

Sanding Tips

Never force the sander. The weight of the sander supplies adequate pressure,

allowing the sandpaper to do the work. Applying additional pressure will slow the

motor, rapidly wear the sandpaper, and greatly reduce the sander speed. This will

slow the removal rate and produce an inferior quality surface.

CAUTION: Excessive pressure will overload the motor, causing possible damage

to the sander by overheating the motor; or damage to the workpiece.

Be sure to check your workpiece often. The sander is capable of removing

material rapidly, especially with coarse paper.

The orbital action of your sander allows you to sand with the grain, or at any angle

across it for most sanding jobs. In the nal stages a better nish will be achieved

by sanding with the grain.

Do not sand on one spot for too long. The sander’s rapid action may remove too

much material, creating an uneven surface.

GENERAL POWER TOOL SAFETY WARNINGS

ELECTRICAL SAFETY

WARNING! Read all the safety information, instructions, illustrations and technical data

provided on or with this power tool. Failure to adhere to the following instructions may result in

electric shock, re and/or serious injury.

Keep all the safety information and instructions in a safe place for future use.

The term „power tool“ used in the safety information and instructions refers to power tools operated

from the mains power supply (with a power cable) and to battery operated power tools (without a

power cable).

1. Workplace safety

a) Keep your work area clean and well lit. Untidy or unlit work areas can result in accidents.

b) Do not use this power tool in an area where there is a risk of explosion and where there are

inammable liquids, gases or dust. Power tools generate sparks that can ignite dust or vapors.

c) Keep children and other people away from the power tool while you are using it. If you are

distracted you may lose control of the power tool.

2. Electrical safety

a) The plug on the power tool must t into the socket. The socket must not be modied in any way. Do

not use adapter plugs together with power tools with a protective earth. Unmodied plugs and matching

sockets will reduce the risk of an electric shock.

b) Avoid body contact with earthed surfaces such as pipes, heating systems, stoves and

refrigerators. There is an increased risk of su󰀨ering an electric shock if your body is earthed.

c) Keep the power tool out of the rain and away from moisture. The ingress of water into an electric

power tool increases the risk of an electric shock.

d) Do not use the power cable for a purpose for which it is not designed, for example to carry the

power tool, hang it up or to pull the plug out of the socket. Keep the power cable away from heat,

oil, sharp edges and moving parts. Power cables that are damaged or tangled increase the risk of an

electric shock.

e) If you use an electric power tool outdoors, use only extension cables that are suitable for outdoor

use. The use of an extension cable which is suitable for outdoor use reduces the risk of an electric

shock.

f) If you cannot avoid using the power tool in a damp location, use a residual current device

(RCD) circuit breaker. The use of a residual current device (RCD) circuit breaker will reduce the risk of

su󰀨ering an electric shock.

3. Safety of persons

a) Be careful, watch what you are doing and be sensible and responsible when using an electric

power tool. Never use the power tool if you are tired or under the inuence of drugs, alcohol or

medication. One moment of inattention when using the electric tool can result in serious injuries.

b) Wear personal safety equipment and always wear safety goggles. Wearing personal safety

equipment such as dust masks, non-slip safety shoes, a helmet or ear plugs, depending on the type and

application of the tool, reduces the risk of injury.

c) Make sure that the tool cannot start up accidentally. Ensure that the power tool is switched o󰀨 before

you connect it to the power supply and/or connect the battery pack, pick it up or carry it. If you have your

nger on the switch while carrying the power tool or if you connect the power tool to the power supply

while it is switched on, this may cause accidents.

d) Remove all adjusting tools or wrenches before you switch on the power tool. Any tool or wrench in

a rotating part of the power tool could cause injuries.

e) Avoid abnormal working postures. Make sure you stand squarely and keep your balance at all times.

This will enable you to control the power tool better in unexpected situations.

f) Wear suitable clothes. Never wear loose tting clothes or jewelry. Keep hair and clothing away from

moving parts. Loose clothing, jewelry or long hair can be caught by moving parts.

g) If dust extraction devices and dust collection devices can be tted, they must be connected and

must be used correctly. The use of a dust extractor can reduce the dangers posed by dust.

h) Do not allow yourself to be lulled into a false sense of security and do not ignore the safety

regulations covering electric power tools, even if you are familiar with the power tool after having

used it many times. Carelessness can lead to serious injuries in just a fraction of a second.

4. Using and handling the power tool

a) Do not overload your power tool. Use the correct electric tool for the job in hand. The correct tool will

enable you to work better and more safely within the specic performance range.

b) Do not use an electric power tool if the switch is defective. An electric power tool that cannot be

switched on or o󰀨 is dangerous and must be repaired.

c) Pull the plug out of the socket and/or remove the removable battery pack before making any

adjustments to the tool, changing plug-in tool parts or putting the power tool down. These

precautions will prevent the power tool starting accidentally.

d) Keep unused electric tools out of the reach of children. Do not allow people who are not familiar

with the power tool or who have not read these instructions to use the power tool. Electric tools are

dangerous if they are used by inexperienced people.

e) Look after power tools and plug-in tools with care. Check that moving parts function correctly and do

not jam, and whether any parts are broken or damaged such that they adversely a󰀨ect the function of the

power tool. Have damaged parts repaired before you use the power tool. Many accidents are caused by

poorly maintained electric tools.

f) Keep cutting tools sharp and clean. Carefully maintained cutting tools with sharp cutting edges will

jam less and are easier to control.

g) Use the power tool, plug-in tools, etc. as set out in these instructions. Take account of the

conditions in your work area and the job in hand. Using electric tools for purposes other than the one for

which they are designed can result in dangerous situations.

h) Keep the handles and grip surfaces dry, clean and free from oil and grease. If the handles and grip

surfaces are slippery, it will not be possible to operate and control the power tool safely in unforeseen

situations.

5. Service

a) Have your power tool repaired only by trained personnel using only genuine spare parts. This will

ensure that your power tool remains safe to use.

WARNING! When using mains-powered tools, basic safety precautions, including the

following, should always be followed to reduce risk of re, electric shock, personal injury

and material damage.

Read the whole manual carefully and make sure you know how to switch the tool o󰀨 in an emergency,

before operating the tool.

Save these instructions and other documents supplied with this tool for future reference.

Before you connect the equipment to the mains supply make sure that the data on the rating plate are

identical to the mains data.

This tool is double insulated therefore no earth wire is required.

If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid

a hazard.

Note: Double insulation does not take the place of normal safety precautions when operating this tool. The

insulation system is for added protection against injury resulting from a possible electrical insulation failure

within the tool.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the

extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective.

When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not

suitable for the power input of the tool or which is damaged or defective may result in a risk of re and electric

shock.

SOUND & VIBRATION

DECLARATION OF CONFORMITY

For EU countries only

Never place any electric power tools in your household refuse.

To comply with European Directive 2012/19/EC concerning old electric

and electronic equipment and its implementation in national laws, old

electric power tools have to be separated from other waste and disposed

of in an environment-friendly fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to the manufacturer, the

owner of the electrical equipment must make sure that the equipment is

properly disposed of if p1-he no longer wants to keep the equipment. The old

equipment can be returned to a suitable collection point that will dispose

of the equipment in accordance with the national recycling and waste

disposal regulations. This does not apply to any accessories or aids

without electrical components supplied with the old equipment.

The reprinting or reproduction by any other means, in whole or in part, of

documentation and papers accompanying products is permitted only with

the express consent of the iSC GmbH.

Subject to technical changes

Sound and vibration values were measured in accordance with EN

60745.

Lpa sound pressure level: 71 dB

pa uncertainty: 3 dB

Lwa sound power level 82 dB

wa uncertainty: 3 dB

Wear ear-mu󰀨s.

The impact of noise can cause damage to hearing.

Total vibration values (vector sum of three directions) determined in

accordance with EN 60745.

Vibration emission value a

h = 1.23 m/s2

K uncertainty = 1.5 m/s

The specied vibration value was established in accordance with a

standardized testing method. It may change according to how the electric

equipment is used and may exceed the specied value in exceptional

circumstances.

The specied vibration value can be used to compare the equipment with

other electric power tools.

The specied vibration value can be used for initial assessment of a

harmful e󰀨ect.

Keep the noise emissions and vibrations to a minimum.

• Only use appliances which are in perfect working order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever necessary.

• Switch the appliance o󰀨 when it is not in use.

• Wear protective gloves.

Yang/Product-ManagementWeichselgartner/General-Manager

explains the following conformity according to EU directives and norms for

the following product

Detail Sander DSR-2500U (Ozito)

2014/29/EU

2005/32/EC_2009/125/EC

(EU)2015/1188

2014/35/EU

2006/28/EC

X 2014/30/EU

2014/32/EU

2014/53/EU

2014/68/EU

(EU)2016/426

Notiﬁ ed Body:

(EU)2016/425

X 2011/65/EU_(EU)2015/863

X 2006/42/EC

Annex IV

Notiﬁ ed Body:

Reg. No.:

2000/14/EC_2005/88/EC

Annex V

Annex VI

Noise: measured LWA = dB (A); guaranteed LWA = dB (A)

P = KW; L/Ø = cm

Notiﬁ ed Body:

2012/46/EU_(EU)2016/1628

Emission No.:

Standard references: EN 62841-1; EN 62841-2-4; EN 55014-1; EN 55014-2;

EN 61000-3-2; EN 61000-3-3; EN 62321

Landau/Isar, den 11.12.2019

First CE: 17 Archive-File/Record: NAPR017295

Art.-No.: 30.001.75 I.-No.: 11017 Documents registrar: Georg Riedel

Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar

ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar

SPARE PARTS

Spare parts can be ordered from the Special Orders

Desk at your local Bunnings Warehouse or Homebase

store.

For further information, or any parts visit

www.ozito-diy.co.uk or contact Ozito Customer Service:

Great Britain: 0151 294 4488

Ireland: 1850 882711

E-mail: info@ozito-diy.co.uk

DESCRIPTION OF SYMBOLS

Danger! Read the operating instructions to reduce the risk of

inquiry.

Caution! Wear ear-mu󰀨s. The impact of noise can cause

damage to hearing.

Caution! Wear a breathing mask. Dust which is injurious to

health can be generated when working on wood and other

materials. Never use the device to work on any materials

containing asbestos!

Caution! Wear safety goggles. Sparks generated during

working or splinters, chips and dust emitted by the device can

cause loss of sight.

Double insulated (Protection Class II)

SERVICE INFORMATION

Please note that the following parts of this product are subject to normal

or natural wear and that the following parts are therefore also required

for use as consumables.

* Not necessarily included in the scope of delivery!

Category Example

Wear parts* Carbon brushes, grinding/sanding plate

Consumables* Grinding/sanding paper

Missing parts

Anleitung_DSR_2500U.indd 1-4

Anleitung_DSR_2500U.indd 1-4Anleitung_DSR_2500U.indd 1-4 11.12.2019 14:42:05

11.12.2019 14:42:05

11.12.2019 14:42:0511.12.2019 14:42:05

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

2 Firmly grasp the sander and turn the sander on.

KNOW YOUR PRODUCT

2. HOOK AND LOOP SANDING SHEET 3. DUST BAG 4. ON/OFF SWITCH 5.

SANDING

1 When tting sanding paper, align the holes on the sanding sheet

with the holes on the sanding pad.

2 To turn on, press the on/o󰀨 switch to the on position “I”.

3 To turn o󰀨, press the on/o󰀨 switch to the o󰀨 position “0”.

To remove, pull the dust canister

away from the extraction port.

Push the dust canister onto the dust

extraction port.

5 Dust Canister 6 Sanding Paper x 20

(6x60g, 8 x 80g, 6 x 120g)

ACCESSORIES

1 On/O󰀨 Switch

2 Hook & Loop Sanding Pad

3 Soft Grip

4 Dust Canister Adapter

DETAIL SANDER

SETUP & PREPARATION OPERATION

1 / 3 Full

2 Replace the sanding sheet when it is worn.

3 Replace hook &

loop backing pad

when worn (see

maintenance section).

Side to Side

1 Connect the tool to the mains power supply.

3 Let the motor build up

to maximum speed.

Gradually lower it

onto the workpiece

with a slight forward

movement.

4 For optimum results, use either of these strokes.

5 Upon completion of the sanding operation, remove the sander

from the workpiece and then turn o󰀨 the sander.

Empty dust canister when it becomes

1/3 full for optimum dust

extraction.

1 Secure the material to be sanded.

Install

Removal

Empty

WARNING: THE TOOL IS RECOMMENDED FOR

USE WITH A RESIDUAL CURRENT DEVICE WITH A

RATED RESIDUAL CURRENT OF 30MA OR LESS.

CAUTION: GUIDE THE POWER CORD DURING

SANDING TO PREVENT IT BEING CAUGHT ON THE

WORKPIECE OR OTHER OBJECTS.

WARNING: ENSURE THE TOOL IS DISCONNECTED

FROM THE POWER SUPPLY BEFORE PERFORMING

ANY OF THE FOLLOWING OPERATIONS..

Backward/ Forward

For easy emptying and cleaning of the dust canister. Remove the rear

of the dust canister by pushing in the tabs at both sides and pulling the

rear section out.

DSR-2500U

1. BEFORE USE

Items Supplied

Please check that the article is complete as specied in the scope

of delivery. If parts are missing, please contact our service center or

the sales outlet where you made your purchase at the latest within

5 working days after purchasing the product and upon presentation

of a valid bill of purchase. Also, refer to the warranty table in the

service information at the end of the operating instructions.

• Open the packaging and take out the equipment with care.

• Remove the packaging material and any packaging and/or

transportation braces (if available).

• Check to see if all items are supplied.

• Inspect the equipment and accessories for transport damage.

• If possible, please keep the packaging until the end of the

guarantee period.

Danger!

The equipment and packaging material are not toys. Do not let

children play with plastic bags, foils or small parts. There is a

danger of swallowing or su󰀨ocating!

Proper Use

The machine is designed for the grinding/san ding of wood, metal,

plastic and similar materials using the appropriate grinding/sanding

paper. The equipment is not suitable for wet grinding/ sanding.

The equipment is to be used only for its prescribed purpose. Any

other use is deemed to be a case of misuse. The user / operator

and not the manufacturer will be liable for any damage or injuries of

any kind caused as a result of this.

Please note that our equipment has not been designed for use in

commercial, trade or industrial applications. Our warranty will be

voided if the machine is used in commercial, trade or industrial

businesses or for equivalent purposes.

Caution!

Residual risks

Even if you use this electric power tool in accordance with

instructions, certain residual risks cannot be rules out.

The following hazards may arise in connection with the

equipment’s construction and layout:

1. Lung damage if no suitable protective dust mask is used.

2. Damage to hearing if no suitable ear protection is used.

3. Health damage caused by hand-arm vibrations if the equipment

is used over a prolonged period or is not properly guided and

maintained.

Anleitung_DSR_2500U.indd 5-8

Anleitung_DSR_2500U.indd 5-8Anleitung_DSR_2500U.indd 5-8 11.12.2019 14:42:06

11.12.2019 14:42:06

11.12.2019 14:42:0611.12.2019 14:42:06

Produktspezifikationen

Marke:	Ozito
Kategorie:	Schleifmaschine
Modell:	DSR-2500U

Brauchst du Hilfe?

Wenn Sie Hilfe mit Ozito DSR-2500U benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Schleifmaschine Ozito

Ozito AGB-1200 Bedienungsanleitung

28 September 2024

Ozito AGS-4050U Bedienungsanleitung

16 August 2024

Ozito AGS-4050 Bedienungsanleitung

11 August 2024

Ozito AGM-5005 Bedienungsanleitung

21 Juli 2024

Ozito PXAGK-300 Bedienungsanleitung

13 Juli 2024

Ozito PX5PAK-005 Bedienungsanleitung

11 Juli 2024

Ozito AGB-1201 Bedienungsanleitung

9 Juli 2024

Ozito PXBAGS-125 Bedienungsanleitung

7 Juli 2024

Ozito BSR-7000U Bedienungsanleitung

26 Juni 2024

Ozito PXMSS-700U Bedienungsanleitung

26 Juni 2024

Bedienungsanleitung Schleifmaschine

Neueste Bedienungsanleitung für -Kategorien-

Makita GA9060R Bedienungsanleitung

15 Oktober 2024

Hitachi G 13SR Bedienungsanleitung

14 Oktober 2024

Makita DGA700Z Bedienungsanleitung

13 Oktober 2024

Metabo WP820-115 Bedienungsanleitung

8 Oktober 2024

DeWalt DW887N Bedienungsanleitung

7 Oktober 2024

Milwaukee 0725-21 Bedienungsanleitung

5 Oktober 2024

Makita GA013GD101 Bedienungsanleitung

3 Oktober 2024

Milwaukee 2784-20 Bedienungsanleitung

3 Oktober 2024

Ryobi RAG800-115 Bedienungsanleitung

2 Oktober 2024

Makita GA022GD202 Bedienungsanleitung

2 Oktober 2024