Ozito ASG-GFK Bedienungsanleitung
Ozito
Farbenspritzpistole
ASG-GFK
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂźr Ozito ASG-GFK (12 Seiten) in der Kategorie Farbenspritzpistole. Dieser Bedienungsanleitung war fĂźr 21 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/12
GRAVITY FEED
SPRAY GUN
100-190 ml/min
INSTRUCTION MANUAL
SPECIFICATIONS
Working Air Pressure: 43psi (3Bar)
Max Air Pressure: 87psi (6Bar)
Air Consumption: 141-283L/min (5-10cfm)
Nozzle Size: ø1.4mm
Spray Width: 40-70mm
Flow Rate: 100-190ml/min
Feed Type: Gravity
Paint Pot Size: 600ml
Air Inlet: 1/4â BSP
WHATâS IN THE BOX
Spray Gun
Paint Pot
Filter
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head OfďŹce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The beneďŹts provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
ASG-GFK
0414
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase and is intended for DIY (Do It
Yourself) use only. If a product is defective it will be replaced in
accordance with the terms of this warranty. Warranty excludes
consumable parts.
WARNING
The following actions will result in the warranty being void.
â˘î If the tool has been operated on a supply voltage other
than that speciďŹed on the tool.
â˘î If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
â˘î Failure to perform maintenance as set out within the
instruction manual.
â˘î If the tool is disassembled or tampered with in any way.
â˘î Professional, industrial or high frequency use.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Nozzle
2 Nozzle Collar
3 Variable Trigger
4 Fan Adjustment Dial
5 Paint Pot
6 Air Regulator Valve
7 Air Inlet
8 Fluid Adjustment Dial
9 Air Vent
GRAVITY FEED SPRAY GUN
KNOW YOUR PRODUCT
12345
6789
1. ASSEMBLY
SETUP & PREPARATION
WARNING! ENSURE THE TOOL IS DISCONNECTED FROM
THE AIR SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
1 Align the paint pot with the
hole on the top of the spray
gun.
1 Wrap the threaded male air
inlet of the spray gun with
teîon tape in a clockwise
direction.
1 Simply place the îżlter into
the top hole of the spray
gun with the knob facing
up.
3 Pull back the sleeve on
hose îżtting, insert male
end & release sleeve
on hose îżtting.
2 Screw the paint pot in
tightly by hand.
2 Screw the female îżtting
clockwise onto the male
end of the air inlet.
Fitting the Paint Pot
Attaching to Compressor
Inserting the Filter
3. ADJUSTING THE SPRAY GUN
OPERATION
2. PREPARATION
1 Before pouring any paint
or thinners work out how
much of each substance is
needed.
3 Once the correct viscosity
is obtained, pour the
mixture into the paint pot.
Thinning is particularly important when spraying. Most paints
are supplied ready for brush application and need to be diluted
sufîżciently for spraying purposes.
Follow the manufacturers guide for thinning ratios which
should be labelled on the paint container.
2 Pour the required paint and
thinners through a îżlter into
a mixing cup and then mix
thoroughly.
Thinning
NOTE: FOR BEST RESULTS, SURFACE PREPARATION AND PAINT
THINNING ARE THE TWO MOST IMPORTANT AREAS. ENSURE
ALL SURFACES ARE FREE OF DUST, DIRT AND GREASE.
IMPORTANT! THE SPRAY GUN CANNOT BE USED WITH
MATERIALS CONTAINING ABRASIVE SUBSTANCES, GLAZES,
CAUSTIC AND ALKALINE SUBSTANCES.
Note: The further the variable trigger is pressed, the more îuid
will îow through the gun.
1 Fully tighten the îuid
adjustment dial.
The îuid adjustment dial is a stop that limits the distance the
trigger can be pressed and can therefore limit the amount of
paint being sprayed.
2 Slightly loosen the îuid
adjustment dial, then test
setting on a scrap piece of
material.
Variable Trigger
Fluid Adjustment Dial
PAINT
THINNER
PAINT
THINNERS
3 Repeat step 2 until desired îuid output is reached.
1 To restrict the air pressure
entering the spray gun
turn the valve clockwise.
Air Regulator Valve
1 Squeeze the variable
trigger to start spraying.
2 Release the variable
trigger to stop spraying.
The air regulator valve controls the air pressure entering the gun.
2 To increase air pressure
entering the gun, turn the
air valve anti-clockwise.
Produktspezifikationen
| Marke: | Ozito |
| Kategorie: | Farbenspritzpistole |
| Modell: | ASG-GFK |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Ozito ASG-GFK benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Farbenspritzpistole Ozito
25 Dezember 2023
20 Oktober 2022
Bedienungsanleitung Farbenspritzpistole
- Farbenspritzpistole Parkside
- Farbenspritzpistole Einhell
- Farbenspritzpistole Tacklife
- Farbenspritzpistole Wagner
- Farbenspritzpistole Power Craft
- Farbenspritzpistole Earlex
- Farbenspritzpistole Wagner SprayTech
- Farbenspritzpistole Chapin
Neueste Bedienungsanleitung fĂźr -Kategorien-
10 April 2024
7 Februar 2024
5 Februar 2024
22 Januar 2024
3 Januar 2024
1 Januar 2024
27 Dezember 2023
27 Dezember 2023
3 September 2023
19 Juni 2023