Outwell Jimbu Bedienungsanleitung

Outwell Herde Jimbu

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Outwell Jimbu (17 Seiten) in der Kategorie Herde. Dieser Bedienungsanleitung war für 37 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/17
JIMBU STOVE
ANNATTO STOVE
OLIDA STOVE
INNOVATIVE FAMILY CAMPING
MODEL: 650800 / 218-BT
MODEL: 650804 / 204PI-BT
MODEL: 650604 / 220V1-BT
UK: INSTRUCTION MANUAL
DE: BEDIENUNGSANLEITUNG
DK: BRUGERVEJLEDNING
FR: MODE D'EMPLOI
NL: GEBRUIKSAANWIJZING
CZ: NÁVOD K POUŽITÍ
NO: BRUKERVEILEDNING
2
UK: INSTRUCTION MANUALUK: INSTRUCTION MANUAL
Read these instructions for use carefully so as to familiarize yourself
with the appliance before connecting it to its gas cartridge.
Keep these instructions for future reference.
TECHNICAL DATA:
10.
14.
14.
12.
8.
1.
3.
11.
2.
5.
9.
7.
13.
6.
1.
1. Windshield protection
2. Grate for pots or pans
3. Grill grate with non-stick coating
(Only applicable for Jimbu Stove / 650800-218-BT)
4. Appliance lid
5. Individually controlled burner knob
6. Individually controlled burner knob
7. Auto piezo ignition
8. Inlet for connector / gas hose
9. Drip tray (only applicable for Jimbu Stove / 650800-218-BT)
10. Easy-close latch
11. Gas hose
12. Connector with female valve and female thread
13. Gas valve adaptor with tap
14. Connection points
1. ASSEMBLY
Appliance
name:
Jimbu Stove
(650800/218-BT)
Olida Stove
(650604/220V1-BT)
Annatto Stove
(650804/204PI-BT)
Type of gas: Butane-propane mixture
Category: Direct pressure
Type of gas
cartridge:
All 3 appliances should only be used with Primus 220693, 220794
or 220294 Butane-propane mixture gas cartridges compliant with EN 417.
Injector size: Ø 0.30 mm (Burner) &
Ø 0.20 mm (Grill)
Ø 0.28 mm Ø 0.30 mm
Nominal rate
in g/h and
in kW (Hs):
3.5 kW (255 g/h) (Burner) &
1.5 kW (109 g/h) (Grill)
2 x 3.0 kW (218g/h) 2 x 3.5 kW (255 g/h)
4.
4
UK: INSTRUCTION MANUAL UK: INSTRUCTION MANUAL
• Applicable for Jimbu Stove: Hot fat may drip out at the bottom of the appliance. Do not light your
appliance on a greasy surface.
Connecting your appliance to a gas cartridge
To be able to use your appliance you will need to purchase a gas cartridge which is suitable for this
specic appliance. Please see TECHNICAL DATA table for information regarding the gas cartridge.
1) Position the gas cartridge at the side of your appliance, keeping in mind that the cartridge must be
kept away from heat and in a safe and upright position.
2) Make sure that the tap on the adaptor (13) is fully closed by turning it clockwise towards the symbol
“–“.
3) Make sure that both individually controlled knobs (5+6) are closed by turning them fully clockwise
towards the small “•” symbol.
4) Carefully screw the gas cartridge onto the adaptor (13) while taking care not to cross thread.
Screw down until the sealing washer meets the cartridge (hand-tight only).
5) Always check for leaks at all joints before lighting the appliance.
6) Never leave the adaptor (13) attached to the gas cartridge if the hose with connector (12)
is disconnected from the appliance.
Lighting Your Gas Appliance
1) Make sure your gas appliance is assembled and gas cartridge connected according to above
instructions.
2) Open the tab on the adaptor (13) by screwing the tab counterclockwise towards the “+” symbol.
3) Open the individually controlled burner knob 1, 2 or both (5+6), depending on which burner you
want to use, by screwing the knob(s) counterclockwise  away from the small “•” symbol.
4) Hold and push the auto electric igniter (7) to ignite the burner(s).
5) If it fails to ignite after 3-5 attempts close the tap and wait 5 minutes to allow for the unburned gas to
evaporate before making a new attempt.
6) When the burner is lit, turn the control knob(s) (5+6) clockwise to decrease the heat intensity or
extinguish, and counterclockwise to increase.
7) Do not open the valves beyond the point where maximum intensity is reached as this may cause
unnecessary aring and waste gas.
8) Do not move the appliance or gas cartridge once lit as this may result in aring. A warm-up period of
about 1 minute is required to avoid aring.
9) Avoid twisting of the exible hose.
10) If the gas pressure drops or the gas will not light, check if there is still gas left in the cartridge.
If there is gas left in the cartridge the gas temperature may be too low.
150 cm
60 cm
60 cm
60 cm
60 cm
• Do not use the appliance if it is leaking, damaged or does not operate properly.
• The appliance shall be operated on a stable and horizontal surface.
• The appliance shall be used away from ammable materials with minimum distances to any adjacent
surfaces (wall, ceiling) as shown below:


Produktspezifikationen

Marke: Outwell
Kategorie: Herde
Modell: Jimbu

Brauchst du Hilfe?

Wenn Sie Hilfe mit Outwell Jimbu benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Herde Outwell

Bedienungsanleitung Herde

Neueste Bedienungsanleitung fĂźr -Kategorien-