Orion OR-FH15C Bedienungsanleitung

Orion Herd OR-FH15C

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Orion OR-FH15C (4 Seiten) in der Kategorie Herd. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

http://www.orion.ua

CERAMIC

FAN HEATER

Model: OR-FH15C

ENGLISH GB

220V-240V 50Hz 750W/1500W

http://www.orion.ua 2

DEAR CUSTOMERS!

MANY THANKS FOR BUYING ORION CERAMIC FAN HEATER!

We really believe you will get the greatest pleasure from using this device for the years!

Please, read the user’s guide in detail before first using of this ceramic fan heater.

1. Read all instructions before using the Heater.

2. Use this Heater only as described in this manual. Any other use not recommended by the

manufacturer may cause fire, electrical shock, or injury to person.

3. Make certain that the power source confirms to the electrical requirements of the Heater.

4. Use the heater on flat surfaces, not inclining from the horizontal or vertical, don’t use underneath

socket directly.

5. Do not use your heater in the presence of explosive or flammable substance.

6. Do not use same socket with other high power electrical appliances at same time when heater is

working.

7. There should be tight connection between plug and socket so as to avoid the overheating plug

and malfunction.

8. Unplug the heater by grasping plug and pulling it from the socket. Never yank the power cord.

9. Pay attention when using heaters in presence of children, old man, and disabled people. No use

when no supervision.

10. To avoid danger please return the heater to the approved service agent for changing when power

cord damaged.

11. Do not use the appliance near hot surfaces.

12. Ensure all times that the unit is placed solidly on its base. Make sure that the air inlet and outlet

openings are not blocked. To avoid any risk of fire, do not cover the heater. (Ex. with clothes).

13. Do not insert any objects through the grille into the interior of the appliance.

14. This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should supervised to ensure that they do not play with the appliance

15. The heater should only be operated at minimum distance of 50cm from any wall or other object.

Position the air flow in order to optimize the heating of the room. Avoid corners, small volumes,

floors and ceilings.

WARNING: TO AVOID DANGER OF ELECTRICAL SHOCK, UNPLUG FROM OUTLET WHEN NOT IN USE

AND BEFORE CLEANING. IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACE BY A SPECIAL

CORD OR ASSEMBLY AVAILABLE FROM THE MANUFACTURE OR ITS SERVICE AGENT.

SAVE THESE INSTRUCTION FOR FUTURE REFERENCE

GENERAL SAFETY INFORMATION

http://www.orion.ua 3

1. Pilot lamp

2. Thermostat

3. Swing button

4. Rotary switch

5. Outlet wind

6. Base

1. Remove the Heater from the carton.

2. Place the heater on a firm level surface.

3. Set the main power to ‘Off’. Plug the cord set into a 220V electrical outlet.

4. The heater is equipped with 4-position rotary switch:

5. Set the rotary switch to maximum for fast warm up of a room. Once the temperature of room is

comfortable, select a lower setting to reduce electrical consumption and to prevent the room from

becoming too warm.

6. If you selected low or full output, choose the desired temperature with the thermostat. With the

Thermostat, the temperature can be regulated step by step.

7. When the desired temperature is reached, the unit will automatically switch off. Once the temperature

has fallen below the pre-set level, the heater will switch on again.

8. Pilot light will allow you to check the thermostatic regulation. When the appliance is heating, this pilot

light will be on. It will go out when the desired temperature is reached.

9. Before removing the plug from the socket, switching off and better work for 30-60 seconds with cool

air in condition that protecting inner parts.

This appliance also has the swing function. To switch the function on, press the swing switch. To stop it,

press the swing switch again.

SYMBOL FUNCTION

0 OFF

* Fan without heater

I 750W (Low heat output)

II 1500W(Full heat output)

OPERATING INSTRUCTIONS

SWING BUTTON

PARTS NAME

Produktspezifikationen

Marke:	Orion
Kategorie:	Herd
Modell:	OR-FH15C

Brauchst du Hilfe?

Wenn Sie Hilfe mit Orion OR-FH15C benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Herd Orion

Orion ORCH-010 Bedienungsanleitung

26 August 2024

Orion OR-FH02C Bedienungsanleitung

26 August 2024

Orion OR-QH20 Bedienungsanleitung

26 August 2024

Orion OR-FH05B Bedienungsanleitung

26 August 2024

Orion OR-FH15C Bedienungsanleitung

26 August 2024

Orion OR-QH20T Bedienungsanleitung

26 August 2024

Bedienungsanleitung Herd

Neueste Bedienungsanleitung für -Kategorien-

Harvia 22 8 WK220SES Bedienungsanleitung

16 Oktober 2024

Zibro Kamin RCA 3000 F Bedienungsanleitung

13 Oktober 2024

Pelgrim IDK784 Bedienungsanleitung

8 Oktober 2024

Basetech BT-2268546 Bedienungsanleitung

6 Oktober 2024

Livin Flame EVO Remote - Wi-Fi Module Bedienungsanleitung

5 Oktober 2024

Spartherm Passo S Bedienungsanleitung

5 Oktober 2024

Nestor Martin TFH33 Bedienungsanleitung

5 Oktober 2024

Livin Flame Build in burners Bedienungsanleitung

5 Oktober 2024

Livin Flame Karlstad Bedienungsanleitung

5 Oktober 2024

AEG BSS577121M Bedienungsanleitung

4 Oktober 2024