Oricom MBL002 Bedienungsanleitung
Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr Oricom MBL002 (2 Seiten) in der Kategorie UKW. Dieser Bedienungsanleitung war fĂĽr 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/2
Contact Details for Oricom Support
and Warranty claims in Australia
Oricom International Pty Ltd
Unit 1, 4 Sovereign Place
South Windsor, NSW 2756
Australia
Email: support@oricom.com.au
Phone: (02) 4574 8888 (Monday to
Friday 8am to 6pm AEST)
Web: www.oricom.com.au
Fax: (02) 4574 8898
Contact details for Oricom Support
and Warranty Claims in New Zealand
Email: support@oricom.co.nz
Phone: 0800 674 266
(Monday to Friday 10am to 8pm NZST)
ORICOM BRACKETMBL001 / MBL002 User Guide
• A completed Return Authorisation form
• A copy of your Proof of Purchase (please keep your original copy)
• The faulty product, including all accessories.
Send the approved returns to: Oricom
International Pty Ltd Locked Bag 658
South Windsor NSW 2756 Australia
Please note that this Express Warranty excludes expenses incurred by you in
returning any faulty product to us. You must arrange and pay any expenses
incurred (including postage, delivery, freight, transportation or insurance of the
product) o return the faulty product to us, however, we will t arrange delivery of the
repaired or replaced faulty product to you.
Important Information
Repair Notice
Please be aware that the repair of your goods may result in the loss of any user-
generated data (such as stored telephone numbers, text and contact messages
information). Please ensure data saved on that you have made a copy of any
your goods before sending for repair.
Please also be aware that goods presented for repair may be replaced by
refurbished goods or parts of the same type rather than being repaired.
MBL001 / MBL002
FITTING INSTRUCTIONS (For use with Oricom range of detachable antenna whips)
Choose a location:
1) Select an open position which will work to reduce the signal shadowing, and in turn,mounting ,
improve transmission range. The antenna should be mounted as far as possible from any
metal structure, including . vertical metal strips, cables, rods or railing
2) When selecting a position, ensure that the cable routing and distance to radio are considered.
It should also be considered that antenna whip will flex during motion, which will add stress tos
the bracket mounting point. A flat surface will aid in reducing any stress on the mounting
bracket.
3) Ensure that the selected location is free of electrical wiring, or other hazard, before safely
commencing the install (as per below instruction)ation .
4) An important consideration is the ability to fold down antenna bracket and whip, when not in
use. Select a location where the desired fold down of antenna whip is suitable.
USER GUIDE ORICOM ANTENNA BRACKET - VHF MBL001/MBL002
Installation:
1) Each marine bracket is supplied with a drilling template, located on the reverse side of the
bracket packaging card. Locate the template, and in the desired location, use this template as
your guide, drilling from the outside. Ensure that the antenna fold down position is considered
before drilling a hole.
2)
3)
Each of the four securing holes can be drilled using a suitable 7mm drill bit.
If the desire is to have the coaxial cable passing through the base of the bracket, blind holes
have been allocated for reference on the drilling template. It is recommended that a mm9.5
drill bit is used to remove the blind hole. The blind hole will also need to be removed from the
antenna base, so using the mm drill bit, locate the matching hole, and remove.9.5
4) Once holes are removed, antenna coaxial cable can be fed through the drilled hole on the
base of the bracket, and through the hole drilled into the suitable boat location. Each bracket
includes a split rubber grommet, which is designed to be wrapped around cable on underside
of the base of the bracket, and securely pushed into place in drilled hole. This is to ensure that
when the base is screwed into place, there is a seal of the gap between the cable and the
base.
5) Each of the four affixing screws can now be tightened, but be careful not to over tighten which
could damage the base or vessel. It is recommended that after 1 month of use, that the
retention screws are tightened once more.
6) waterproof A neutral cure silicon sealant can be used around the base of the bracket, to
ensure that the bracket is affixed and secure.
7) toThe antenna coaxial cable can now be installed the radio.
Note: Each Oricom marine whip is factory pre-tuned and must not be altered in any way. It is not
recommended to cut or alter the supplied coaxial cable in any way.
During the Express Warranty Period, Oricom will where possible repair and if not
replace the faulty product or part thereof. All component parts removed under this
Express Warranty become the property of Oricom.
In the unlikely event that your Oricom product has a recurring failure, Oricom may
always, subject to the Competition and Consumer Act 2010, at its discretion, elect
to provide you with a replacement product of its choosing that is at least equivalent
to your product in performance.
No change to the conditions of this Express Warranty is valid unless it is made
in writing and signed by an authorised representative of Oricom.
Oricom will not be liable under this Express Warranty, and to the extent
permitted by law will not be liable for any defect, loss, damage or injury
arising out of or in connection with a:
1. failure by you to adhere to the warnings and follow the instr set out inuctions
this user guide for the proper installation nd use of the product; a
2. wilful misconduct or deliberate misuse by you of the product;
3. any external cause beyond our control, including but not limited to power failure,
lightning or over voltage; or
4. modification to the product or services carried out on the product by
anyone other than Oricom or Oricom’s authorised service provider.
How to make a claim y Express Warranty under our in Australia
Oricom has a simple warranty process for you to follow:
•Please call or email our Customer Support Team, or 02 4574 8888
support@oricom.com.au.
•A Customer member verify Support Team will after troubleshooting with
you your product qualifies warranty. If so, they will if under give you a
Product Return Authorisation number.
•We will then email or fax a Return Authorisation form and a Repair Notice
(if necessary), together with instructions on how to return the goods for
warranty service.
Please note that if a Customer Support Team member advises that your product
does not qualify for return, this warranty does not apply to your product. Products
that are authorised to be returned to Oricom in Australia must include all of the
following:
Express Warranty (Australia)
Express Warranty (Australia)
This Express Warranty is provided by Oricom International Pty Ltd
ABN 46 086 116 Unit 1, 4 Sovereign Place, 369, South Windsor NSW 2756,
herein after referred to as “Oricom”. Oricom products come with guarantees
that cannot be excluded under the Australian Consumer Law. You entitled are
to a replacement or refund for a failure major and compensation for any
other reasonably foreseeable loss damage. or You are also entitled to have
the goods replaced repaired or if the goods fail to quality be of acceptable
and the amount failure does not to a major failure.
Oricom warrants that the product is free from defects in materials or
workmanship during the Express Warranty Period. This Express Warranty does
not extend to any product from which the serial number has been removed or
was purchased outside of Australia.
Nothing in this Express Warranty excludes, restricts or modifies any
condition, warranty, guarantee, implied term, right or remedy pursuant to the
Australian Consumer Law and which may not be so excluded, restricted or
modified. For such conditions, terms, guarantees and warranties that cannot be
excluded, restricted or modified, Oric om limits the remedies available to extent
permitted in the relevant legislation.
The Express Warranty Period will be from the date of purchase of 12 months the
product evidenced by your dated sales receipt. You are required to provide
proof of purchase as a condition of receiving Express Warranty services.
You are entitled to a replacement product or repair of the product at our
discretion according to the terms and conditions of this document if your
product is found to be faulty within the Express Warranty Period. This
Express Warranty extends to the original purchaser only and is not
transferable.
Products distributed by Oricom are manufactured using materials or new new and
used materials equivalent to new in performance and reliability. Spare parts may
be new or equivalent to new. Spare parts are warranted to be free from defects in
material or workmanship for thirty (30) days or for the remainder of the Express
Warranty Period of the Oricom branded product in which they are installed,
whichever is longer.
Produktspezifikationen
| Marke: | Oricom |
| Kategorie: | UKW |
| Modell: | MBL002 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Oricom MBL002 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung UKW Oricom
17 August 2024
12 August 2024
10 August 2024
9 August 2024
8 August 2024
8 August 2024
6 August 2024
Bedienungsanleitung UKW
- UKW Dual
- UKW Garmin
- UKW Lowrance
- UKW Midland
- UKW Rockford Fosgate
- UKW Albrecht
- UKW Clarion
- UKW Boss
- UKW Hertz
- UKW Wet Sounds
Neueste Bedienungsanleitung fĂĽr -Kategorien-
28 August 2024
15 August 2024
14 August 2024
13 August 2024
13 August 2024
12 August 2024
10 August 2024
8 August 2024
6 August 2024
6 August 2024