Oregon Scientific WMR 90A Bedienungsanleitung
Oregon Scientific
Weerstation
WMR 90A
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Oregon Scientific WMR 90A (25 Seiten) in der Kategorie Weerstation. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/25
1
EN
INTRODUCTION
Thank you for selecting the Oregon Scientific
TM Advanced Weather Station with
Wireless Sensor Set (WMR90A).
The base station is compatible with other sensors. To purchase additional sensors,
please contact your local retailer.
Sensors with this logo are compatible with this unit.
PACKAGING CONTENTS
1 x 6V Adapter
4 x UM-3 / AA
WIND SENSOR
1 x Wind Sensor
with “T-Shaped”
Connector
1 x Wind Vane
1 x Top Pole
1 x Wind Direction
Indicator
2 x Round U-Shaped
Bolts 1 x Screw (Type A)
4 x UM-3 / AA
2 x Screws
(Type B) 1 x Plastic Support
Base
RAIN GAUGE
1 x Rain Collector
1 x Filter
2 x UM-3 / AA
4 x Screws (Type C)
6 x Washers
Advanced Weather Station
with Wireless Sensor Set
USER MANUAL
CONTENTS
Introduction .......................................................................................................................1
Packing Contents ............................................................................................................1
Wind Sensor .......................................................................................................................1
Rain Gauge ........................................................................................................................1
Overview ............................................................................................................................2
LCD Display .......................................................................................................................2
Wind Sensor .......................................................................................................................3
Rain Gauge ........................................................................................................................3
Getting Started .................................................................................................................3
Set up Remote Wind Sensor ...........................................................................................3
Set up Remote Rain Gauge ..............................................................................................4
Set up Base Station ..........................................................................................................4
Base Station .....................................................................................................................4
Change Display / Setting ..................................................................................................4
Clock Reception ...............................................................................................................4
Clock / Calendar ..............................................................................................................5
Clock Alarm ......................................................................................................................5
Moon Phase .......................................................................................................................5
Auto Scanning Function ................................................................................................5
Weather Forecast ............................................................................................................5
Temperature and Humidity ...........................................................................................5
Temperature and Humidity Trend ....................................................................................6
Comfort Level .....................................................................................................................6
Wind Direction / Speed ..................................................................................................6
UVI / Barometer / Rainfall ...............................................................................................6
UV Index .............................................................................................................................6
Barometer ...........................................................................................................................7
Rainfall ................................................................................................................................7
Weather Alarms ...............................................................................................................7
Reset ..................................................................................................................................7
Accessories – Sensors ...................................................................................................7
Troubleshooting ..............................................................................................................7
Precautions ......................................................................................................................7
Specifications ...................................................................................................................7
About Oregon Scientific .................................................................................................8
FCC Statement .................................................................................................................8
Declaration of Conformity ..................................................................................................8
Model: WMR90A
2
EN
OVERVIEW
5
3
4
2
1
1. Increase or decrease the values of the setting+ / - :
2. Switch between the different display modes / settingsMODE:
3. View and set alarms for barometer, temperature, humidity, rainfall and ALARM:
wind speed
4. Switch between the different areas SELECT:
5. Read the max / min memory record; activate / deactivate alarmsMIN / MAX:
1
3
4
2
5
1. Returns unit to default settings RESET:
2. Selects unit of measurementUNIT:
3. Searches for sensors or for the radio-controlled clock signalSEARCH:
4. Battery compartment
5. AC adapter socket
LCD DISPLAY
1
2
3
4
5
6
7
8
1. Weather Forecast Area
2. Temperature / Heat Index / Wind Chill Area
3. Wind Speed / Wind Direction Area
4. UVI / Barometer / Rainfall Area
5. Clock / Alarm / Calendar / Moon Phase Area
6. AC adapter icon - displays when unplugged
7. Low battery icon for base station
8. Humidity / Dew Point Area
Temperature / Heat Index / Wind Chill Area
1
2
3
4
5
6
7
8
9
1. Temperature trend
2. Wind Chill level - temperature is showing
3. Heat Index level - temperature is showing
4. HI / LO temperature, HI Heat Index and LO Wind Chill alarms are set
5. Selected area icon
6. Indoor / Outdoor channel temperature and humidity is displayed
7. MAX / MIN temperature
8. Outdoor sensor battery is low
9. Temperature (°C / °F)
Wind Speed / Wind Direction Area
1
2
3
4
5
6
7
1. Wind speed levels: AVERAGE / MAX / GUST
2. Wind speed level indicator
3. Outdoor wind sensor battery is low
4. Wind speed level description
5. Gust wind or wind speed reading (m / s, kph, mph or knots)
6. HI gust wind alarm is set
7. Wind direction display
UVI / Barometer / Rainfall Area
1
2
3
4
7
8
9
5
6
10
1. UVI / barometer / rainfall readings is showing
2. Outdoor UV / rain sensor battery is low
3. UV / barometer / rainfall alarm is set
4. Rain rate is showing
5. UVI / barometric pressure (mmHg, inHg or mb / h Pa) / rainfall readings (in / hr
or mm / hr)
6. UVI level indicator
7. Accumulated rainfall is showing
8. Past 24hrs rainfall is showing
9. Altitude is showing
10. UVI / barometric pressure / rainfall historical bar chart display
Clock / Alarm / Calendar / Moon Phase Area
1
2
3
4
5
6
1. Clock radio reception
2. Alarm 1 and 2 are displayed and set
3. Timestamp is displayed
4. Offset time zone
5. Moon phase
6. Time / date / calendar
3
EN
Humidity / Dew Point Area
1
2
3
4
5
6
1. Dew
point level - Temperature is showing
2. HI / LO humidity and Dew Point alarms are set
3. Comfort levels
4. Humidity trend
5. MAX / MIN humidity
6. Humidity reading
WIND SENSOR
1
2
5
6
3
4
1. Wind vane measuring the wind speed
2. Wind direction sensor
3. Battery compartment
4.
RESET
hole
5. North indicator
6. Plastic sleeve protecting the batteries
RAIN GAUGE
Base and funnel
1
2
3
1. Rain gauge
2. Battery compartment
3.
RESET
button
Tipping bucket rain gauge
1
2
1. Funne
2. Level indicator
GETTING STARTED
SET UP REMOTE WIND SENSOR
The wind sensor can take 3 readings
• The wind speed and directions
• The outdoor temperature (Channel 1 only
• The outdoor relative humidity (Channel 1 only)
The sensor is battery operated and is capable of transmitting data to the base station
wirelessly within an approximate operating range of 100 meters (328 feet)
NOTE
For best results, ensure that the wind direction indicator on the wind senso
points to the North to enable an accurate reading. The sensor also should be
positioned in an open area away from trees or other obstructions
To set
up the wind sensor main body
:
1. Assemble the wind direction pointer on the top of the wind sensor
2. Use the screw (Type B) to fi x
3. Assemble the wind vanes on the top of the wind pointer
4. Use the screw (Type B) to fi x
3
5. Hold the wind sensor upright and rotate the protective sleeve to the left to unlock
6. Slide the sleeve down to open the battery compartment
7. Insert batteries (4 x UM-3 / AA) in the compartment, matching the polarity (+ / -)
and press
RESET
.
8. Slide the protective sleeve up to close the compartment
9. Rotate the sleeve to the right to lock
5
6
To set up the wind sensor main body on an existing pole
1. Remove the screw that fi xes the plastic connector at the end of the top pole
2.
Remove the plastic connector by sliding it off the pole.
3.
Insert the pole into the plastic base.
1
1
2
4.
Insert the screw into the plastic base and pole and secure using the Type B
screw and washers.
5.
Align the back of the plastic base to an existing pole.
6.
Using the 2 U-bolts, secure the plastic base to the pole by inserting the ends of
the U-bolts into the holes on the plastic base and securing it with washers and
bolts.
7.
Slide Integrated wind sensor into the plastic base and pole.
8.
Insert and screw the Type “X” bolt into the hole.
7
7
9
6
6
9. Slide the battery cover off.
10. Using a compass, rotate and align the wind direction sensor and the NORTH
indicator line to the North.
11. Press the button.RESET
12. Slide the battery cover up
13. Rotate the sleeve clockwise to clock the cover
Produktspezifikationen
| Marke: | Oregon Scientific |
| Kategorie: | Weerstation |
| Modell: | WMR 90A |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Oregon Scientific WMR 90A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Weerstation Oregon Scientific
2 September 2024
21 August 2024
19 August 2024
19 August 2024
17 August 2024
17 August 2024
16 August 2024
16 August 2024
15 August 2024
15 August 2024
Bedienungsanleitung Weerstation
- Weerstation Clatronic
- Weerstation Hama
- Weerstation Lexibook
- Weerstation Nedis
- Weerstation Clas Ohlson
- Weerstation Cotech
- Weerstation Profile
- Weerstation Adler
- Weerstation Camry
- Weerstation Velleman
- Weerstation ADE
- Weerstation Alecto
- Weerstation Auriol
- Weerstation Bresser
- Weerstation Cresta
- Weerstation Day
- Weerstation Dexford
- Weerstation ECG
- Weerstation EMOS
- Weerstation Eurochron
- Weerstation Gira
- Weerstation HomeMatic
- Weerstation Irox
- Weerstation Jacob Jensen
- Weerstation Kemot
- Weerstation König
- Weerstation MarQuant
- Weerstation Mebus
- Weerstation Renkforce
- Weerstation Techno Line
- Weerstation Technoline
- Weerstation Telefunken
- Weerstation TFA
- Weerstation Thomson
- Weerstation Trevi
- Weerstation Ventus
- Weerstation Blaupunkt
- Weerstation Rocktrail
- Weerstation Muse
- Weerstation Avidsen
- Weerstation Elro
- Weerstation GoGEN
- Weerstation Hyundai
- Weerstation Orion
- Weerstation Livoo
- Weerstation Balance
- Weerstation Sencor
- Weerstation Krontaler
- Weerstation Lowrance
- Weerstation Globaltronics
- Weerstation ELV
- Weerstation Netatmo
- Weerstation Ascot
- Weerstation Theben
- Weerstation Brandson
- Weerstation Tanita
- Weerstation JUNG
- Weerstation OBH Nordica
- Weerstation Davis
- Weerstation Levenhuk
- Weerstation Vitek
- Weerstation Prestigio
- Weerstation Extech
- Weerstation Fluke
- Weerstation La Crosse Technology
- Weerstation EQ3
- Weerstation DMV Electronics
- Weerstation Garni
- Weerstation Inovalley
- Weerstation IT
- Weerstation La Crosse
- Weerstation Meade
- Weerstation Otio
- Weerstation PCE Instruments
- Weerstation Saxon
- Weerstation Taylor
- Weerstation UPM
- Weerstation Uzoli
- Weerstation TFA Dostmann
- Weerstation AcuRite
- Weerstation Chauvin Arnoux
- Weerstation Brigmton
- Weerstation Greisinger
- Weerstation Marathon
- Weerstation ClimeMET
- Weerstation Buienradar
- Weerstation Balance Meteo
- Weerstation Rebel
- Weerstation JDC
- Weerstation Greenure
- Weerstation Setti+
- Weerstation Bearware
Neueste Bedienungsanleitung für -Kategorien-
14 September 2024
13 September 2024
13 September 2024
13 September 2024
12 September 2024
12 September 2024
12 September 2024
11 September 2024
11 September 2024
11 September 2024