Oregon Scientific Sunrise WS902 Bedienungsanleitung

Oregon Scientific Lichttherapie Sunrise WS902

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Oregon Scientific Sunrise WS902 (4 Seiten) in der Kategorie Lichttherapie. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Sunrise Wake-up Clock

Model: WS902

USER MANUAL

WAKE UP THE NATURAL WAY

Our body clock is often not in sync with the demands and

rhythm of modern life.

Our biological clock is affected by external cues, such as

sunlight. Light at dawn stimulates production of cortisol,

which gets the body ready to work and wake up. By

simulating dawn, Oregon Scientific’s Sunrise Wake-up Clock

(WS902) prepares the body to wake up by gradually

increasing brightness to the set level in the 20 minutes prior

to desired (set) alarm time.

Start your day better and feel energised to tackle the day.

Wake up as nature intended!

IMPORTANT This device does not reduce the hours of sleep

needed.

OVERVIEW

FRONT VIEW

1. SNOOZE / Motion sensor

2. / : Adjust brightness (only when LAMP function has

been activated)

3. NATURE SOUND: Toggle through selection (Forest Birds

/ Brook / Ocean / Rain)

4. SET CLOCK: Enter clock settings

5. SET ALARM: View alarm status; enter alarm settings

6. LAMP: Turn on/off light

7. + / -: Adjust volume (only when radio / soothing sound is

playing); change values of the setting

8. SLEEP: View remaining time; enable radio / soothing

sound / light sleep; set sleep timer

9. RADIO TUNE : Enable auto-search for radio

station; adjust radio frequency marginally (by 0.05MHz)

10. RADIO: Turn on / off radio

11. ALARM: Enable / disable alarm function

BOTTOM VIEW

1. Battery compartment

2. WAKE UP LIGHT ON·OFF: Enable / disable light for

alarm sequence

3. DISPLAY BRIGHTNESS HIGH·LOW: Select LCD

display brightness HIGH / LOW

4. AUDIO LINE-IN: Socket for connecting to external music

storage device

5. RESET: Reset unit to default settings

LCD DISPLAY

1. AM/PM

2. Beep / Radio / Rooster crow alarm

selected

3. Alarm with wake up light enabled

4. Batteries low / no battery

5. Alarm time

6. Radio Mode is ON and frequency is displayed

7. Volume is displayed

8. Sleep mode is ON and remaining time is displayed

9. Nature sound selected (1-4)

10. Sound from external source plugged into unit

GETTING STARTED

REPLACING LAMP

For first time use, take out provided light bulb and go directly

to step 4.

1. Unplug unit from wall socket and allow unit (bulb) to cool

for approx. 15 minutes.

CAUTION Always allow unit to cool for 15 minutes prior to

cleaning, storing, replacing parts as unit can be very hot.

2. Push in OPEN / COVER tab to release lamp cover. Lift

cover off.

3. Unscrew old bulb.

4. Screw in new bulb.

5. Push in OPEN / CLOSE tab and slide lamp cover back in

place.

NOTE This unit uses 75 W light bulbs. The built-in protection

feature will automatically shut down the unit when the

temperature inside the lamp cover is too high. Please allow

this unit to cool until the temperature inside is within a safe

range.

CONNECT TO POWER SOURCE

Memory backup:

1. Remove the battery compartment cover.

2. Insert the batteries (2xAAA), matching the polarities.

3. Replace the battery compartment cover.

NOTE Batteries should not be exposed to excessive heat

such as sunshine or fire.

Before selecting a location to place the unit, consider the

following:

• Ensure there is approximately 15 cm between unit and

closest object, such as walls or other objects.

• Ensure there is at least 40 cm space above the top of the

unit for ventilation purposes.

• Ensure distance between unit and wall socket is not

longer than the power cord itself.

Batteries serve as a back-up power supply. To fully utilize all

features, plug into wall socket.

To completely disconnect from power, the unit should be

disconnected from the wall socket.

NOTE The main unit should not be exposed to wet conditions.

No objects filled with liquid, such as vases, should be placed

on the main unit.

CLOCK

MANUALLY SET CLOCK

1. Press SET CLOCK to enter setting mode.

2. Press + or - to change the settings or press and hold + / –

to rapidly change the settings.

3. Press SET CLOCK to confirm and move to next setting.

The settings order is: 12/24 hr format, time.

RADIO

To activate / deactivate radio:

• Press RADIO to turn radio on / off.

To set radio station:

1. Press RADIO to turn radio on.

2. Press and hold RADIO TUNE to auto search or

press RADIO TUNE to manually select frequency.

SOOTHING NATURE SOUNDS

NOTE Deactivate radio first. Radio OFF will be displayed on

screen.

To activate / deactivate soothing sounds:

1. Press NATURE SOUND to play sounds.

2. Press NATURE SOUND repeatedly to select desired

sound (1-4) or to turn sound off.

ADJUST VOLUME

To adjust volume:

• Press + / – when radio or nature sound is turned on.

TIP Press and hold + / – to rapidly adjust volume.

ALARM

To set the alarm:

1. Press SET ALARM to enter setting mode.

2. Press + / - to change the settings or press and hold + / –

to rapidly change the settings.

3. Press SET ALARM to confirm and move to next setting.

4. Repeat steps 2-3 for all setting options.

The settings order is: time, alarm sound (select from

beep/radio/rooster crow)

NOTE If radio alarm is selected, radio will play for 60 minutes

at set alarm time.

For your convenience, the volume and radio frequency will be

stored in memory for the next time radio is turned on.

To activate / deactivate alarm:

• Press ALARM.

To silence the alarm:

• Wave your hand in front of the unit (motion sensor) to

silence it for 8 minutes

• Press any button to turn the alarm off and activate it again

after 24 hours.

ALARM WITH WAKE UP LIGHT

To activate / deactivate wake up light:

• Slide WAKE UP LIGHT switch to ON / OFF.

When wake up light has been activated, will be displayed

next to ALARM on the LCD screen.

NOTE Light will fade-in (gradually increase in brightness) 30

minutes prior to set alarm time. Light will stay on (even after

SNOOZE has been pressed) after set alarm time for 60

minutes.

SLEEP TIMER

To adjust sleep timer setting:

1. Turn on desired option:

OPTION PRESS:

Radio RADIO

Light LAMP

Soothing sound NATURE SOUND

2. Press SLEEP to activate.

3. Press SLEEP repeatedly to change the sleep timer

setting (120, 90, 60, 30, 15, 0 min).

After 5 seconds of inaction, the timer will automatically be

confirmed and set.

To view time remaining:

• Press SLEEP.

TIP Press SLEEP again to change sleep timer (120, 90, 60,

30, 15, 0 min).

NOTE Ensure radio or sound and/or light has been selected

to activate sleep timer.

NOTE If light option has been chosen for sleep timer, light

will fade out.

READING LAMP

To turn on / off light:

• Press LAMP located at the bottom left of LCD display.

To adjust level of brightness:

• Press / to increase or decrease brightness.

TIP Press and hold / to rapidly change level of

brightness (1-20).

For your convenience, the level of brightness will be stored in

memory for the next time light is turned on.

NOTE Do not look directly at the light.

PLAY MUSIC

Using a cable, plug one end to your music storage device

and one end to AUDIO LINE-IN located at the back of unit.

When device has been successfully connected, will

be displayed on the LCD screen and sound will emit from

speakers.

LCD BACKLIGHT

To adjust brightness:

• Slide DISPLAY BRIGHTNESS switch to LOW / HIGH.

RESET

1. Remove and reinsert the batteries.

2. Press RESET to return to the default settings.

SNOOZE

To silence the alarm:

• Wave your hand up to 8 cm (3 inches) in front of the

SNOOZE IR motion sensor to silence it for 8 mintues

( will blink during this time)

• Press any key to turn the alarm off and activate it again

after 24 hours.

SPECIFICATIONS

MAIN UNIT

TYPE DESCRIPTION

H x W x D 257 x 199 x 140 mm

(10.12 x 7.84 x 5.51 in)

Weight 386 g (13.6 oz)

without battery

FM 87.5 to 108 MHz

Power Input: AC 220-240V

50/60Hz (EU version)

Input: AC 100-120V

50/60Hz (US/Canada

version)

2 x UM-4 (AAA) 1.5V

batteries (for backup)

PRECAUTIONS

• Do not subject the unit to excessive force, shock, dust,

temperature or humidity.

• Do not cover the ventilation holes with any items such as

newspapers, curtains etc.

• Remove dust regularly with a dry cloth. Accumulated dust

poses a potential fire hazard.

• Do not immerse the unit in water. If you spill liquid over it,

dry it immediately with a soft, lint-free cloth.

• Do not clean the unit with abrasive or corrosive materials.

• Do not tamper with the unit’s internal components. This

invalidates the warranty.

• Only use fresh batteries. Do not mix new and old batteries.

• Images shown in this manual may differ from the actual

display.

• When disposing of this product, ensure it is collected

separately for special treatment.

• Placement of this product on certain types of wood may

result in damage to its finish for which Oregon Scientific

will not be responsible. Consult the furniture

manufacturer's care instructions for information.

• The contents of this manual may not be reproduced

without the permission of the manufacturer.

• Do not dispose old batteries as unsorted municipal waste.

Collection of such waste separately for special treatment

is necessary.

• Please note that some units are equipped with a battery

safety strip. Remove the strip from the battery

compartment before first use.

NOTE The technical specifications for this product and the

contents of the user manual are subject to change without

notice.

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientific.com) to learn more

about Oregon Scientific products. If you're in the US and

would like to contact our Customer Care department directly,

please visit: www2.oregonscientific.com/service/support

Call 1-800-853-8883.

For international inquiries, please visit:

www2.oregonscientific.com/about/international

EU-DECLARATION OF CONFORMITY

Hereby, Oregon Scientific, declares that this Sunrise Wake-

Up Clock (model: WS902) is in compliance with the essential

requirements and other relevant provisions of Directive

1999/5/EC. A copy of the signed and dated Declaration of

Conformity is available on request via our Oregon Scientific

Customer Service.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) This

device must accept any interference received, including

interference that may cause undesired operation.

WARNING Changes or modifications not expressly approved

by the party responsible for compliance could void the user's

authority to operate the equipment.

NOTE This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio / TV

technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact for

support or sales. Please call our customer service number

(listed on our website at www.oregonscientific.com), or on the

warranty card for this product) for all inquiries instead.

Name: Oregon Scientific, Inc.

Address: 19861 SW 95th Ave.,Tualatin,

Oregon 97062 USA

Telephone No.: 1-800-853-8883

declare that the product

Product No.: WS902

Product Name: Sunrise Wake-Up Clock

Manufacturer: iPM Concepts Limited

Address: Block C, 9/F, Kaiser Estate,

Phase 1, 41 Man Yue St., Hung Hom,

Kowloon,

Hong Kong

is in conformity with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: 1) This device may

not cause harmful interference. 2) This device must accept

any interference received, including interference that may

cause undesired operation.

Produktspezifikationen

Marke:	Oregon Scientific
Kategorie:	Lichttherapie
Modell:	Sunrise WS902

Brauchst du Hilfe?

Wenn Sie Hilfe mit Oregon Scientific Sunrise WS902 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Lichttherapie Oregon Scientific

Oregon Scientific Sunrise WS902 Bedienungsanleitung

11 August 2024

Oregon Scientific Ilumi WL201 Bedienungsanleitung

14 Juni 2023

Bedienungsanleitung Lichttherapie

Neueste Bedienungsanleitung für -Kategorien-

Klarstein 10026416 Bedienungsanleitung

11 Oktober 2024

Innosol Kubo Bedienungsanleitung

10 September 2024

Lumie Sunrise Alarm Bedienungsanleitung

6 September 2024

Lumie Bodyclock Spark 100 Bedienungsanleitung

6 September 2024

Kogan KAWAKLGT2SA Bedienungsanleitung

5 September 2024

Apira Science iGrow Bedienungsanleitung

2 September 2024

Davita LD 110 Bedienungsanleitung

30 August 2024

Davita LD 72 Bedienungsanleitung

30 August 2024

Prologue WL-08 Bedienungsanleitung

29 August 2024

Sunrise BlueMax 320 Bedienungsanleitung

28 August 2024