Oregon Scientific BARM699A Bedienungsanleitung

Oregon Scientific Wetterstation BARM699A

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Oregon Scientific BARM699A (3 Seiten) in der Kategorie Wetterstation. Dieser Bedienungsanleitung war für 22 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

Touch-Control AM/FM Atomic Weather

Clock with Dual Alarm

Model: BARM699A

USER MANUAL

INTRODUCTION

Thank you for selecting the Oregon Scientiﬁc

TM Touch-

Control AM/FM Atomic Weather Clock with Dual

Alarm (BARM699A). The main unit can support up

to 3 sensors. To purchase additional sensors, please

contact your local retailer.

NOTE Please keep this manual handy as you use

your new product. It contains practical step-by-step

instructions, as well as technical speciﬁcations and

warnings you should know about.

OVERVIEW

FRONT VIEW

1. : Activate snooze; set the sleep SLEEP / SNOOZE

timer

2. : Turn radio ON / OFFRADIO ON / OFF

3. STATION: Toggle between 16 preset radio channels;

save a channel

4. : Increase / decrease volume VOLUME /

5. : Change setting / display CLOCK

6. : Toggle between AM and FM AM / FM

7. : Increase / decrease TUNING / SET /

setting; activate / deactivate clock reception signal;

change radio frequency

BACK VIEW

1. MEMORY: View current, maximum and minimum

temperature

2. : Switch remote sensor displayCHANNEL

3. Adapter socket

4. : View alarm status; set alarm ALARM

5. : Select temperature unit °C / °F °C / °F

6. : Reset unit to default settingsRESET

LCD

1. Ice warning

2. Weather forecast

3. Preset radio station number

4. AM / FM station; radio frequency in MHz or KHz and

volume level

5. Radio-controlled clock reception icon

6. 12-hour clock

7. Indoor temperature display icon

8. Channel number and sensor reception status

9. Sensor low battery warning

10. Outdoor temperature reading

11. Maximum / minimum outdoor temperature reading

12. Main unit low battery warning

13. Indoor temperature reading

14. Maximum / minimum indoor temperature reading

15. Sleep function is activated

16. Alarm is displayed

17. Beep alarm is set

18. Radio alarm is set

19. US time zone, weekday or seconds

20. Time, alarm and date

REMOTE SENSOR

1. LED status indicator:

Blinks red during data

transmission

2. Ventilation duct

1. Wall mount

2. Battery compartment

3. Battery door

4. Table stand

5. switchCHANNEL

GETTING STARTED

POWER

Plug adapter into main unit.

NOTE This product may malfunction when radio

interference appears on the AC power line. The unit will

revert to normal operation when interference stops.

NOTE Install the remote sensor battery and plug in the

main unit. Press RESET after each battery change. Do

not use rechargeable batteries. It is recommended that

you use alkaline batteries with this product for longer

performance.

shows when battery is low.

UNIT LOCATION

Main Indoor temperature area

Remote Outdoor temperature area

REMOTE SENSOR

The sensor collects temperature readings approx. every

40 seconds and sends them to the main unit. The main

unit can collect data from up to 3 sensors.

To set up the sensor:

1. Slide open the battery door.

2. Insert the battery, matching the polarity (+ / -).

3. Select a channel. Make sure you use a different

channel for each sensor.

4. Close the battery compartment.

5. Secure the sensor in the desired location using the

wall mount or table stand.

1 2 3

CHANNEL

For best results:

• Place the sensor out of direct sunlight and

moisture.

• Do not place the sensor more than 30 meters (100

feet) from the main (indoor) unit.

• Position the sensor so that it faces the main (indoor)

unit, minimizing obstructions such as doors, walls,

and furniture.

• Place the sensor in a location with a clear view to

the sky, away from metallic or electronic objects.

• Position the sensor close to the main unit during cold

winter months as below-freezing temperatures may

affect battery performance and signal transmission.

The transmission range may vary depending on many

factors. You may need to experiment with various

locations to get the best results.

Standard Alkaline batteries contain signiﬁcant

amounts of water. Because of this they will freeze

in low temperatures of approximately -12°C (10°F).

Disposable Lithium batteries have a much lower

threshold for temperature with an estimated freezing

range of below -30°C (-22°F).

Wireless ranges can be impacted by a variety of factors

such as extremely cold temperatures. Extreme cold

may temporarily reduce the effective range between the

sensor and the base station. If the unit’s performance

fails due to low temperature, the unit will resume proper

functioning as the temperature rises to within the

normal temperature range (i.e. no permanent damage

will occur to the unit due to low temperatures).

SENSOR DATA TRANSMISSION

The reception icon shown in the outdoor temperature

area shows the status.

ICON DESCRIPTION

Main unit is searching for

the sensor(s)

A channel has been found

and signal is being

received

and “- -“ The sensor cannot be found.

(Outdoor temperature Search for the sensor or

area) check the battery

To search for a sensor

Simultaneously, press and hold MEM CHANNEL and

for 2 seconds.

NOTE The sensor LED ﬂashes when data is being

sent to the main unit. If the sensor signal is still not

found, check the battery, obstructions, and remote unit

location.

LIGHT TOUCH KEY

The touch keys used in this product have a key lock

function that prevents accidental changes to user

settings. When the clock keys have not been used in

the last minute, the key lock function is automatically

activated. Press any key once to disable the key lock

function and then operate the clock as usual.

CLOCK RECEPTION

This product is designed to synchronize its date and

time automatically once it is within range of the WWVB-

60 signal from the atomic clock in Boulder, Colorado.

The sensor collects the radio signals whenever it is

within 3219 km (2000 miles) of a signal.

NOTE Initial reception takes 2-10 minutes for ﬁrst set

up or when RESET is pressed. Once complete, the

reception icon will stop blinking. If the signal is weak, it

can take up to 24 hours to get a valid signal.

RECEPTION SIGNAL

STRONG WEAK NO SIGNAL

To enable and force a signal search:

Press and hold for 2 seconds.TUNING / SET

To disable the signal reception

Press and hold for 2 seconds. TUNING / SET

ﬂashes when it is searching for the atomic clock

signal and disappears when it is disabled.

CLOCK

To manually set the clock make sure the clock signal

reception is disabled.

To manually set the clock:

1. Press and hold CLOCK for 2 seconds.

2. Press TUNING / SET / to change the

settings.

3. Press CLOCK to conﬁrm.

4. The setting sequence is: US time zone, 12 / 24

hour format, hour, minute, year, day / month format,

month, day, and display language.

NOTE The US time zone options are Paciﬁc (PA),

Mountain (MO), Central (CE) and Eastern (EA).

NOTE The language options are (E) English, (F)

French, (D) German, (I) Italian, and (S) Spanish.

To switch the clock display:

Press to toggle between:CLOCK

• Clock with seconds

• Clock with weekday

• Calendar

ALARM

To set the alarm:

1. Press ALARM to view the alarm. will show on

the display.

2. Press and hold ALARM for 2 seconds.

3. Press TUNING / SET / to change the hour,

minute, beep or radio alarm. If you select the radio

alarm, press and AM / FM STATION to select the

band and station respectively.

4. Press ALARM to conﬁrm.

To activate or deactivate the alarm:

Press when in the alarm display. or ALARM

appears when the alarm is set.

To silence the alarm:

• Press to silence it for 8 minutes.SNOOZE

• Press any key except to turn the alarm off SNOOZE

and activate it again after 24 hours.

NOTE or ﬂashes when snooze is activated.

WEATHER FORECAST

This product forecasts the weather for the next 12 to 24

hours within a 19-31 mile (30-50 km) radius, with 70 to

75 percent accuracy.

SUNNY PARTLY CLOUDY CLOUDY RAINY

TEMPERATURE

To change the temperature measurement unit:

Press on the bottom of the unit.°C / °F

To view outdoor sensor(s) temperature readings

Press . CHANNEL

• shows which remote sensor’s data you are

viewing.

• is permanently displayed in the indoor

temperature area.

To auto-scan between sensors:

Press and hold CHANNEL for 2 seconds. Each sensor’s

data is displayed for 3 seconds.

To end auto-scan:

Press or CHANNEL MEMORY.

To toggle between current, minimum and maximum

records for the selected sensor:

Press MEMORY repeatedly.

To clear the records:

Select the channel to clear the memory, then press and

hold MEMORY for 2 seconds.

NOTE The indoor memory record will be cleared

simultaneously.

ICE WARNING

If the channel 1 sensor falls between 3°C to -2°C (37°F

to 28°F), will ﬂash to warn you that the temperature

is approaching freezing.

NOTE The alarm will automatically stop if the

temperature goes outside the ice-warning range.

RADIO

You can save up to 16 radio stations (8 for AM and 8

for FM).

To turn the radio ON / OFF:

Press . RADIO

To save a station:

1. Press RADIO to turn the radio ON.

2. Press AM / FM to select radio frequency.

3. Press TUNNING / SET / to manually ﬁne

tune the frequency or press and hold TUNNING /

SET / to activate auto-search.

4. Press and hold STATION to save the station.

SLEEP TIMER

To turn the sleep timer ON:

1. Press SLEEP once to activate the last setting

used.

2. Press SLEEP to set radio sleep timer duration (120,

90, 60, 30, 15 or 0 minutes). Select “0” to disable

the sleep timer.

3. Press to change the volume.VOLUME /

NOTE “SLEEP” ﬂashes when the sleep timer is

activated.

BACKLIGHT

Press any key to activate the backlight for 1 minute.

RESET

Press to return the main unit to the default RESET

settings. Remove and then re-insert the batteries to

reset the sensor.

PRECAUTIONS

This product is engineered to give you years of

satisfactory service if you handle it carefully. Here are

a few precautions:

• Do not use a damp cloth to clean the surface of

the light touch key, If it is necessary to use a damp

cloth to clean the unit, turn the power off before

cleaning.

• Placement of this product on wood surfaces with

certain types of ﬁnishes, such as clear varnish, may

result in damage to the ﬁnish. Consult the furniture

manufacturer’s care instructions for direction as

to the types of wood surface. Oregon Scientiﬁc

shall not be responsible for any damage to wood

surfaces from contact with this product.

• Do not immerse the unit in water. If you spill liquid

over it, dry it immediately with a soft, lint-free cloth.

• Do not clean the unit with abrasive or corrosive

materials.

• Do not subject the unit to excessive force, shock,

dust, temperature or humidity, which may result in

malfunction, shorter electronic life span, damaged

battery and distorted parts.

• Do not tamper with the unit’s internal components.

Doing so will invalidate the warranty on the unit and

may cause unnecessary damage. The unit contains

no user-serviceable parts.

• Only use fresh batteries as speciﬁed in the user’s

instructions. Do not mix new and old batteries.

• Do not use rechargeable batteries.

• Remove batteries when storing the product for a

long time.

• Do not dispose this product as unsorted municipal

waste. Collection of such waste separately for

special treatment is necessary.

• Due to printing limitations, the displays shown in

this manual may differ from the actual display.

• The contents of this manual may not be reproduced

without the permission of the manufacturer.

NOTE The technical speciﬁcations for this product and

the contents of the user manual are subject to change

without notice.

SPECIFICATIONS

TYPE DESCRIPTION

Main unit

Dimensions 163 x 65.4 x 96 mm

(L x W x D) (6.4 x 2.6 x 3.8 inches)

Weight 300g (10.6 ounces)

Temperature unit – °C / °F

Indoor range -5°C to 50°C (23°F to 122°F)

Outdoor range -30°C to 60°C (-22°F to 140°F)

Resolution 0.17°C (0.2°F)

Radio clock

Synchronization Auto or disabled

Clock display HH:MM

Hour format 12hr AM/PM or 24hr

Calendar DD/MM or MM/DD

Weekday in 5 (E, G, F, I, S)

languages

Alarm 2-minute beep or radio alarm with

8-minute snooze

PLL Radio FM / AM; MHz / KHz; 16 preset

channels

Sleep 120, 90, 60, 30 and 0 mins

Remote unit (THN132N)

Dimensions 92 x 22 x 50 mm

(L x W x D) (3.6 x 0.9 x 2.0 inches)

Weight 46 g (1.62 lbs) without battery

RF frequency 433MHz

Range Up to 30 meters (100 feet) with no

obstructions

Transmission Approx. every 40 seconds

Channel no. 1, 2 or 3

Power

Main unit 6V adapter

Remote unit 1 x UM-3 (AA) 1.5V battery

NOTE We recommend that you use alkaline batteries in

the sensor for longer usage and lithium batteries for use

in temperatures below freezing.

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientiﬁc.com) to

learn more about Oregon Scientiﬁc products such as

digital cameras; MP3 players; children’s electronic

learning products and games; projection clocks; health

and ﬁtness gear; weather stations; and digital and

conference phones.

The website also includes contact information for our

Customer Care department in case you need to reach

us, as well as frequently asked questions and customer

downloads. We hope you will ﬁnd all the information you

need on our website, however if you’re in the US and

would like to contact the Oregon Scientiﬁc Customer

Care department directly, please visit:

www2.oregonscientiﬁc.com/service/default.asp OR call

1-800-853-8883. For international inquiries, please visit:

www2.oregonscientiﬁc.com/about/international.asp

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired

operation.

WARNING Changes or modiﬁcations not expressly

approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

NOTE This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio / TV

technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact

for support or sales. Please call our customer service

number (listed on our website at www.oregonscientiﬁc.

com), or on the warranty card for this product) for all

inquiries instead.

Name: Oregon Scientiﬁc, Inc.

Address: 19861 SW 95th Ave., Tualatin,

Oregon 97062 USA

Telephone No.: 1-800-853-8883

declare that the product

Product No.: BARM699A

Product Name: Wireless Thermometer with

Self-Setting Clock and FM

Radio

Manufacturer: IDT Technology Limited

Address: Block C, 9/F, Kaiser Estate,

Phase 1,41 Man Yue St., Hung

Hom, Kowloon, Hong Kong

is in conformity with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: 1)

This device may not cause harmful interference. 2) This

device must accept any interference received, including

interference that may cause undesired operation.

086L004256-013

Produktspezifikationen

Marke:	Oregon Scientific
Kategorie:	Wetterstation
Modell:	BARM699A

Brauchst du Hilfe?

Wenn Sie Hilfe mit Oregon Scientific BARM699A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Wetterstation Oregon Scientific

Oregon Scientific BAR 888A Bedienungsanleitung

2 September 2024

Oregon Scientific AP 928 - WMR928NX Bedienungsanleitung

27 August 2024

Oregon Scientific AWS888N COLOUR WEATHER STATION Bedienungsanleitung

27 August 2024

Oregon Scientific BAR206SA Bedienungsanleitung

27 August 2024

Oregon Scientific BAR 800W Bedienungsanleitung

27 August 2024

Oregon Scientific Bar292A Bedienungsanleitung

27 August 2024

Oregon Scientific BAR669A Bedienungsanleitung

21 August 2024

Oregon Scientific PSL06 Bedienungsanleitung

21 August 2024

Oregon Scientific THN132N Bedienungsanleitung

19 August 2024

Oregon Scientific BAA800H Bedienungsanleitung

19 August 2024

Bedienungsanleitung Wetterstation

Neueste Bedienungsanleitung für -Kategorien-

Hyundai WSP 3080 Bedienungsanleitung

15 Oktober 2024

La Crosse Technology V61 Bedienungsanleitung

8 Oktober 2024

JUNG WS10R Bedienungsanleitung

5 Oktober 2024

Auriol Z31055B (IAN 77437) Bedienungsanleitung

3 Oktober 2024

Cresta DSX100 Bedienungsanleitung

2 Oktober 2024

La Crosse Technology WS-7091 Bedienungsanleitung

30 September 2024

La Crosse Technology 308-1414B Bedienungsanleitung

29 September 2024

Cresta WXR-815 Bedienungsanleitung

29 September 2024

Livoo SL262 Bedienungsanleitung

24 September 2024

Bresser 70-08001 BF-PRO Bedienungsanleitung

24 September 2024