Optoma HD30 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Optoma HD30 (69 Seiten) in der Kategorie Projektoren. Dieser Bedienungsanleitung war für 17 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/69
1English
Table of Contents ............................1
Usage Notice ...................................2
Safety Information ...............................2
Precautions .........................................3
Eye Safety Warnings ..........................6
Introduction ......................................7
Package Overview ..............................7
Product Overview ...............................8
Main Unit .............................................. 8
Control Panel ....................................... 9
Input/Output Connections .................. 10
Remote Control .................................. 11
Installation .....................................13
Connecting the Projector ..................13
Connect to Computer/Notebook ........ 13
Connect to Video Sources ................. 14
Connect to 3D Video Devices ...........15
Using the 3D glasses ........................17
Powering On/Off the Projector ..........18
Powering On the Projector ................. 18
Powering Off the Projector ................. 19
Warning Indicator ............................... 20
Adjusting the Projected Image ..........21
Adjusting the Projector’s Height ........21
Adjusting the Projector’s Focus .........22
Adjusting Projection Image Size ........22
User Controls ................................24
Control Panel & Remote Control ......24
Control Panel .....................................24
Remote Control .................................. 25
On-screen Display Menus ................29
How to operate ..................................29
Menu Tree .......................................... 30
IMAGE ............................................... 32
IMAGE | Advanced ............................ 34
IMAGE | Advanced | Signal (VGA) ... 36
IMAGE | Advanced | Signal (Video) ... 37
DISPLAY ............................................ 38
DISPLAY | 3D ...................................40
SETUP ............................................... 41
SETUP | Audio Settings ..................... 43
SETUP | Security ............................... 44
SETUP | Advanced ............................45
OPTIONS ........................................... 46
OPTIONS | Lamp Settings ................. 48
OPTIONS | Advanced ........................ 49
Appendices ....................................50
Troubleshooting ................................50
Image Problems ................................. 50
Other Problems .................................. 52
Remote Control Problems ................. 52
LED Lighting Messages ..................... 53
On Screen Messages ........................ 54
Replacing the Lamp ..........................55
Compatibility Modes .........................57
RS232 Commands and Protocol
Function List .....................................59
RS232 Pin Assignments .................... 59
RS232 Protocol Function List ............60
Ceiling Mount Installation ..................64
Optoma Global Ofces .....................65
Regulation & Safety Notices .............67
FCC Notice ........................................ 67
Declaration of Conformity for EU
countries ............................................ 68
Trademarks .......................................69
Table of Contents
2
English
Usage Notice
The lightning ash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous volt-
age” within the product’s enclosure that may be of sufcient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance (servic-
ing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Important Safety Instruction
1. Do not block any ventilation openings. To ensure reliable operation of the
projector and to protect from over heating, it is recommended to install the
projector in a location that does not block ventilation. As an example, do
not place the projector on a crowded coffee table, sofa, bed, etc. Do not
put the projector in an enclosure such as a book case or a cabinet that
restricts air ow.
2. Do not use the projector near water or moisture. To reduce the risk of re
and/or electric shock, do not expose the projector to rain or moisture.
3. Do not install near heat sources such as radiators, heaters, stoves or any
other apparatus such as ampliers that emits heat.
4. Clean only with dry cloth.
5. Only use attachments/accessories specied by the manufacturer.
6. Do not use the unit if it has been physically damaged or abused. Physical
damage/abuse would be (but not limited to):
Unit has been dropped. -
Power supply cord or plug has been damaged. -
Liquid has been spilled on to the projector. -
Projector has been exposed to rain or moisture. -
Something has fallen in the projector or something is loose inside. -
Do not attempt to service the unit yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards. Please call
Optoma before you send the unit for repair.
7. Do not let objects or liquids enter the projector. They may touch danger-
ous voltage points and short out parts that could result in re or electric
shock.
8. See projector enclosure for safety related markings.
9. The unit should only be repaired by appropriate service personnel.
Safety Information
3English
Usage Notice
Please follow all warnings, precautions and mainte-
nance as recommended in this users guide.
When the lamp
reaches the end
of its life, the pro-
jector will not turn
back on until the
lamp module has
been replaced. To
replace the lamp,
follow the proce-
dures listed under
“Replacing the
Lamp” section.
Warning- Do not look into the projector’s lens when the
lamp is on. The bright light may hurt your eyes.
Warning- To reduce the risk of re or electric shock, do
not expose this projector to rain or moisture.
Warning- Please do not open or disassemble the projec-
tor as this may cause electric shock.
Warning- When replacing the lamp, please allow the unit
to cool down.
Warning- This projector will detect the life of the lamp
itself. Please be sure to change the lamp when
it shows warning messages.
Warning- Reset the “Lamp Reset” function from the on-
screen display “System|Lamp Setting” menu
after replacing the lamp module.
Warning- When switching the projector off, please ensure
the cooling cycle has been completed before
disconnecting power. Allow 90 seconds for the
projector to cool down.
Warning- Do not use lens cap when projector is in opera-
tion.
Warning- When the lamp is approaching to the end of
its life time, the message “Replacement sug-
gested” will show on the screen. Please contact
your local reseller or service center to change
the lamp as soon as possible.
Warning- Do not look into or point the laser pointer on
your remote control into your or someone’s
eyes. Laser pointer can cause permanent dam-
age to eyesight.
NOTE
Precautions


Produktspezifikationen

Marke: Optoma
Kategorie: Projektoren
Modell: HD30

Brauchst du Hilfe?

Wenn Sie Hilfe mit Optoma HD30 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Projektoren Optoma

Bedienungsanleitung Projektoren

Neueste Bedienungsanleitung für -Kategorien-