Opticis HDFC-100-150 Bedienungsanleitung

Opticis Kabel für Computer und Peripheriegeräte HDFC-100-150

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Opticis HDFC-100-150 (5 Seiten) in der Kategorie Kabel für Computer und Peripheriegeräte. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

User’s Manual

HDFC-100

Doc No. : O -H1 - / Rev1.1 EC 61012 M1

Stretch HDMITM

Manual Contents

______________________________________________________

Manual Contents 1-0

Welcome!, Product Description 1-1

System Requirements for Setup 1-2

Installation 1-3

Troubleshooting, Maintenance, Technical Support 1-4

Product Speciﬁcations 1-5

Warranty Information 1-6

Pictorials

Figure 1 General connection diagram of HDFC- 1-1 –100

1- 0 Manual Contents

Welcome!

Congratulations on your purchase of the Stretch HDMITM HDFC-100, Active

Optical Cable for HDMI. This manual contains information that will assist you

in installing and operating the product.

Product Description

Shipping Group

 HDFC-100, Active Optical Cable: One (1) unit, length as your

inquire.

 User s Manual ’

Figure 1 General connection diagram of HDFC- –100

1-1 Welcome, Product Description

System Requirements for Setup

 Hardware requirements

 You have to have a HDMI multimedia systems (DVD, AV

Receiver, STB etc.) or graphic cards. It should support the

maximum graphic resolution feature of TVs to be connected.

 No special requirements memory size, CPU speed and

chipsets, if you ve already properly installed your HDMI ’

systems.

 Software requirements

 No special restrictions, if you ve already properly installed your ’

HDMI / DVI systems.

 AC/DC Power Adapter Technical Advisory

The HDFC-1 designed to use +5V internal power supplied 00 is

through a HDMI pin (#18) from the graphic source port To plug the .

Tx module into HDMI source makes the Rx module supplied over a

copper wire of the hybrid cable.

1-2 System Requirements for Setup

Installation

Important: Please use the installation procedure below. Improper or no

operation may result if the start-up sequence is not correctly followed.

Step 1

Carefully unpack the contents of the shipping group.

Step 2

Plug directly the HDMI plug of the side of HDFC-100 the HDMI Tx into

receptacle of HDMI source (DVDP or Set-top Box) without power up of TV and

HD devices. Do recommend use any intermediate cable or adapter NOT to

between them. It may deteriorate the signal transmission performance.

Step 3

Plug the HDMI plug of the Rx side of HDFC-100 into the HDMI receptacle of a

TV. Do recommend use any intermediate cable or adapter between NOT to

them. It may deteriorate the signal transmission performance.

Step 4

Power ON the device of a HDMI source and a TV and check the blue power

LED on Tx and Rx ON.

Step 5

If the system does not work properly, go to page 1-4, trouble shooting.

Note: HDFC-100 can utilize either the +5V power supplied through a HDMI pin

(#18) from the HDMI source or the +5V power adaptor. Nonetheless, you have

to conﬁrm the power being capable to supply more than 500mA.

Note: Many HDMI sources are able to supply suﬃciently DC power to operate

HDFC- .100

1-3 Installation

Produktspezifikationen

Marke:	Opticis
Kategorie:	Kabel für Computer und Peripheriegeräte
Modell:	HDFC-100-150
Produktfarbe:	Schwarz
Betriebstemperatur:	0 - 70 °C
Relative Luftfeuchtigkeit in Betrieb:	8 - 90 %
Zertifizierung:	FCC / CE
Menge pro Packung:	1 Stück(e)
Kabellänge:	150 m
Betriebsanleitung:	Ja
Temperaturbereich bei Lagerung:	-40 - 85 °C
HDCP:	Ja
Unterstützte Video-Modi:	2160p
Unterstützte Grafik-Auflösungen:	4096 x 2160
3D:	Ja
Audio Return Channel (ARC):	Ja
Maximale Auflösung:	4096 x 2160 Pixel
HDMI-Version:	2.0
Datenübertragungsrate:	3.4 Gbit/s
Farbtiefe:	36 Bit
Anschluss 1:	HDMI Typ A (Standard)
Anschluss 2:	HDMI Typ A (Standard)
Anschluss1 Formfaktor:	Gerade
Steckverbinder 1 Geschlecht:	Männlich
Anschluss2 Formfaktor:	Gerade
Steckverbinder 2 Geschlecht:	Männlich