Onkyo CR-N1 Bedienungsanleitung

Onkyo Empfänger CR-N1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Onkyo CR-N1 (64 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/64
CD RECEIVER
CR-N1
Instruction Manual
Thank you for purchasing the ONKYO CR-N1 CD
Receiver.
Please read this manual thoroughly before mak-
ing any connection or turning on the power.
Follow these instructions to obtain optimum per-
formance and maximum listening enjoyment from
your new CR-N1. Please retain this manual for
future reference.
English
Before using 2
Controls & connectors 12
Getting connected 18
Basic operation 30
Playing CDs 35
Listening to the radio 41
Using the timer 47
Using USB 51
Appendix 58
2
WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS
OUVRIR
AVIS
PORTABLE CART WARNING
S3125A
Important Safeguards
1. – All the safety and Read Instructions
operating instructions should be read
before the appliance is operated.
2. Retain Instructions – The safety and oper-
ating instructions should be retained for
future reference.
3. – All warnings on the Heed Warnings
appliance and in the operating instruc-
tions should be adhered to.
4. – All operating and Follow Instructions
use instructions should be followed.
5. Cleaning – Unplug the appliance from the
wall outlet before cleaning. The appliance
should be cleaned only as recommended
by the manufacturer.
6. – Do not use attachments Attachments
not recommended by the appliance man-
ufacturer as they may cause hazards.
7. Water and Moisture – Do not use the
appliance near water –for example, near a
bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a
swimming pool; and the like.
8. – Do not place the appliance Accessories
on an unstable cart, stand, tripod,
bracket, or table.The appliance may fall,
causing serious injury to a child or adult,
and serious damage to the appliance. Use
only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer,
or sold with the appliance.
Any mounting of the
appliance should follow
the manufacturer’s instruc-
tions, and should use a
mounting accessory rec-
ommended by the manu-
facturer.
9. An appliance and cart
combination should be moved with care.
Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
10. Ventilation – Slots and openings in the cabi-
net are provided for ventilation and to
ensure reliable operation of the appliance
and to protect it from overheating, and
these openings must not be blocked or cov-
ered. The openings should never be blocked
by placing the appliance on a bed, sofa, rug,
or other similar surface. The appliance
should not be placed in a built-in installa-
tion such as a bookcase or rack unless
proper ventilation is provided. There should
be free space of at least 20 cm (8 in.) and an
opening behind the appliance.
11. – The appliance should be Power Sources
operated only from the type of power
source indicated on the marking label. If
you are not sure of the type of power sup-
ply to your home, consult your appliance
dealer or local power company.
12. Grounding or Polarization – The appliance
may be equipped with a polarized alter-
nating current line plug (a plug having
one blade wider than the other). This plug
will fit into the power outlet only one
way. This is a safety feature. If you are
unable to insert the plug fully into the
outlet, try reversing the plug. If the plug
should still fail to fit, contact your electri-
cian to replace your obsolete outlet. Do
not defeat the safety purpose of the
polarized plug.
13. Power-Cord Protection – Power-supply
cords should be routed so that they are
not likely to be walked on or pinched by
items placed upon or against them, pay-
ing particular attention to cords at plugs,
convenience receptacles, and the point
where they exit from the appliance.
3
14. – If an out-Outdoor Antenna Grounding
side antenna or cable system is connected
to the appliance, be sure the antenna or
cable system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA
70, provides information with regard to
proper grounding of the mast and sup-
porting structure, grounding of the lead-
in wire to an antenna-discharge unit, size
of grounding conductors, location of
antenna-discharge unit, connection to
grounding electrodes, and requirements
for the grounding electrode. See Figure 1.
15. – For added protection for the Lightning
appliance during a lightning storm, or
when it is left unattended and unused for
long periods of time, unplug it from the
wall outlet and disconnect the antenna or
cable system. This will prevent damage to
the appliance due to lightning and
power-line surges.
16. – An outside antenna system Power Lines
should not be located in the vicinity of
overhead power lines or other electric
light or power circuits, or where it can fall
into such power lines or circuits. When
installing an outside antenna system,
extreme care should be taken to keep
from touching such power lines or circuits
as contact with them might be fatal.
17. – Do not overload wall out-Overloading
lets, extension cords, or integral conve-
nience receptacles as this can result in a
risk of fire or electric shock.
18. – Never push Object and Liquid Entry
objects of any kind into the appliance
through openings as they may touch dan-
gerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the appli-
ance.
19. – Do not attempt to service the Servicing
appliance yourself as opening or remov-
ing covers may expose you to dangerous
voltage or other hazards. Refer all servic-
ing to qualified service personnel.
20. – Unplug the Damage Requiring Service
appliance form the wall outlet and refer
servicing to qualified service personnel
under the following conditions:
A. When the power-supply cord or plug is
damaged,
B. If liquid has been spilled, or objects
have fallen into the appliance,
C. If the appliance has been exposed to
rain or water,
D. If the appliance does not operate nor-
mally by following the operating
instructions. Adjust only those con-
trols that are covered by the operating
instructions as an improper adjustment
of other controls may result in damage
and will often require extensive work
by a qualified technician to restore the
appliance to its normal operation,
E. If the appliance has been dropped or
damaged in any way, and
F. When the appliance exhibits a distinct
change in performance – this indicates
a need for service.
21. – When replacement Replacement Parts
parts are required, be sure the service
technician has used replacement parts
specified by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in
fire, electric shock, or other hazards.
22. – Upon completion of any Safety Check
service or repairs to the appliance, ask the
service technician to perform safety
checks to determine that the appliance is
in proper operation condition.
23. Wall or Ceiling Mounting – The appliance
should be mounted to a wall or ceiling only
as recommended by the manufacturer.
24. – The appliance should be situated Heat
away from heat sources such as radiators,
heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
FIGURE 1:
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC NATIONAL ELECTRICAL CODE–
ELECTRIC
SERVICE
EQUIPMENT
GROUND
CLAMP
ANTENNA
LEAD IN
WIRE
S2898A

Produktspezifikationen

Marke: Onkyo
Kategorie: Empfänger
Modell: CR-N1

Brauchst du Hilfe?

Wenn Sie Hilfe mit Onkyo CR-N1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Empfänger Onkyo

Onkyo

Onkyo TX-910 Bedienungsanleitung

3 Oktober 2024
Onkyo

Onkyo MCA1120 Bedienungsanleitung

8 September 2024
Onkyo

Onkyo A-905TX Bedienungsanleitung

3 September 2024
Onkyo

Onkyo A-9150 Bedienungsanleitung

30 August 2024
Onkyo

Onkyo HT-R380 Bedienungsanleitung

26 August 2024
Onkyo

Onkyo TX-SR393DAB Bedienungsanleitung

16 August 2024
Onkyo

Onkyo R-805TX Bedienungsanleitung

11 August 2024
Onkyo

Onkyo DAC-HA200(B) Bedienungsanleitung

8 August 2024
Onkyo

Onkyo TX-SR705 Bedienungsanleitung

6 August 2024
Onkyo

Onkyo A-1VL Bedienungsanleitung

1 August 2024

Bedienungsanleitung Empfänger

Neueste Bedienungsanleitung für -Kategorien-

Rotel

Rotel RA‑1592MKII Bedienungsanleitung

16 Oktober 2024
Denon

Denon AVR-S900W Bedienungsanleitung

16 Oktober 2024
Pro-Ject

Pro-Ject Amp Box DS2 Bedienungsanleitung

15 Oktober 2024
AKG

AKG HP12U Bedienungsanleitung

15 Oktober 2024
Sennheiser

Sennheiser EM 9046 SU Bedienungsanleitung

14 Oktober 2024
Yamaha

Yamaha MusicCast RX-V481 Bedienungsanleitung

14 Oktober 2024
JL Audio

JL Audio VX600/6i Bedienungsanleitung

12 Oktober 2024
Pioneer

Pioneer SX-303RDS Bedienungsanleitung

10 Oktober 2024
Technics

Technics SA-160L Bedienungsanleitung

8 Oktober 2024
Avantree

Avantree Audiplex Bedienungsanleitung

7 Oktober 2024