Omega Seamaster Diver Bedienungsanleitung

Omega betrachten Seamaster Diver

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Omega Seamaster Diver (2 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 24 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
1 / 2
SEAMASTER
DIVER 300 M CO-AXIAL 36.25 MM
Steel on steel
Caliber
2500 212.30.36.20.01.002
VCo-Axial escapement
lAutomatic
UChronometer
oSapphire crystal
tAnti-reflective treatment on both sides
dScrew-in crown
qHelium escape valve
G3-year International Warranty
sWater-Resistant to a relative pressure of 30 bar
(300 metres/1000 feet)
WATCH FUNCTIONS
The crown has 3 positions:
1. Normal position (wearing position): when the crown is positioned against the
case, the crown ensures that the watch is water-resistant.
Occasional winding: if the watch has not been worn for 48 hours or more, wind it
up with the crown in position 1.
2. Correcting the date: pull the crown out to position 2, turn the crown
backwards, then push the crown back to position 1.
NB: date-setting is not recommended between 8 pm and 2 am.
3. Time setting: hours – minutes – seconds. Pull the crown out to position 3. The
seconds hand will stop. Turn the crown forwards or backwards. Synchronise the
seconds by pushing the crown back to position 1 to coincide with a given time
signal.
2 / 2
HELIUM ESCAPE VALVE
How to use the helium escape valve? (fig. 2)
In its normal position (fig. 2.1), the OMEGA helium escape valve is perfectly
watertight thanks to the gaskets (B), but it is not functional, since it is screwed
down.
During the decompression phase, unscrew the crown of the valve in order to
release the mechanism (fig. 2.2). The valve is now watertight from the outside.
As the interior pressure becomes greater than the exterior pressure, it pushes the
gasket (A) out of its seating, thus releasing the gas (fig. 2.3). Once the pressure is
equalised, gasket (A) returns to its original position, pushed by the spring (C) (fig.
2.2).
This operation is automatically repeated several times during the decompression
phase. Once atmospheric pressure is reached, screw down the crown of the valve
(fig. 2.1).
Note: Even if the valve is unscrewed, and we strongly recommend that the valve
remains screwed down whenever the watch is immersed in water, the watch is still
water-resistant to a relative pressure of 5 Bar (50 metres). However, complete
water-resistance to the dial depth can only be achieved with gasket (B) and the
valve in the screwed down position.


Produktspezifikationen

Marke: Omega
Kategorie: betrachten
Modell: Seamaster Diver

Brauchst du Hilfe?

Wenn Sie Hilfe mit Omega Seamaster Diver benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung betrachten Omega

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung für -Kategorien-