Omega Speedmaster HB-SIA Bedienungsanleitung

Omega Horloge Speedmaster HB-SIA

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Omega Speedmaster HB-SIA (2 Seiten) in der Kategorie Horloge. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
1 / 2
SPEEDMASTER
HB-SIA CO-AXIAL GMT CHRONOGRAPH NUMBERED EDITION 44.25MM
Titanium on titanium
Caliber
3603 321.90.44.52.01.001
VCo-Axial escapement
lAutomatic
UChronometer
iTime zone function
jSecond time zone
ZTachymeter
oSapphire crystal
tAnti-reflective treatment on both sides
CNumbered Edition
G3-year International Warranty
TWater-Resistant to a relative pressure of 10 bar
(100 metres/330 feet)
WATCH FUNCTIONS
The crown has 3 positions:
1. Normal position (wearing position): when the crown is positioned against the
case, the crown ensures that the watch is water-resistant.
Occasional winding: if the watch has not been worn for 55 hours or more, wind it
up with the crown in position 1.
2. Setting the time zone and correcting the date: pull the crown out to position
2. Turn the crown forwards or backwards, and only the hour hand will move
forwards or backwards by 1-hour intervals. By passing the hour hand over
midnight, the date can be changed forwards or backwards. Push the crown back
to position 1.
Synchronisation of the hour hand and the ’24-hour’ hand
Pull the crown out to position 2 and turn it to synchronise the hour hand with the
time indicated by the ’24-hour’ hand on the 24-hour scale in the centre of the
dial. Make sure you set the hour hand in the correct half of the day!
After synchronising the hour hand with the ’24-hour’ hand, you must set the local
time on your watch. Push the crown back to position 1.
3. Time setting: 24 hours - hours – minutes – seconds. Pull the crown out to
position 3. The seconds hand will stop. Turn the crown forwards or backwards.
Synchronise the seconds by pushing the crown back to position 1 to coincide with
a given time signal.
SECOND TIME ZONE
Thanks to the ’24-hour’ hand with its triangular point, travellers can read the time
back home at a glance on the 24-hour scale at the centre of the dial.
2 / 2
CHRONOGRAPH FUNCTIONS
• Pusher A: start – stop, start – stop, etc.
Timing to 1/8 of a second for up to 12 hours.
• Pusher B: reset (after a stop).
Note: resetting/zeroing of the sub dials must only be carried out after the
chronograph has stopped. Never push the chronograph’s two pushers (A and B)
simultaneously.
TACHYMETRIC SCALES
The desired information is read between the central seconds hand of the
chronograph and the corresponding scale, over a maximum duration of 60
seconds.
Example: calculating the speed of a car.
Record the time the car takes to cover a distance of 1 kilometre. Read off the
tachymetric scale the speed indicated by the central seconds hand. In this case,
the car is travelling at 120 km/h.

Produktspezifikationen

Marke: Omega
Kategorie: Horloge
Modell: Speedmaster HB-SIA

Brauchst du Hilfe?

Wenn Sie Hilfe mit Omega Speedmaster HB-SIA benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Horloge Omega

Bedienungsanleitung Horloge

Neueste Bedienungsanleitung für -Kategorien-